How to HAND-POUR Pure Silver Bars and then Laser Engrave them w/ a Laser Pecker!

Рет қаралды 6,683

9 ай бұрын

Have you ever wanted to Melt, Pour and then Customize your own Fine Silver?
Today we are doing JUST THAT! Using our ToAuto Melting Furncace and our Laser Pecker 4 we will Melt and Pour some Silver Bars and than customize them with the Laser Engraver!
Pick Up your LaserPecker 4 Here (Affiliate Link!)
▶ shrsl.com/46xig
Use Coupon Code: SS50L4 to get $50 Off your Order!
Interested in the ToAuto Melting Furnace? Use Affiliate this link and support the channel!
▶ amzn.to/47Anvqq
Check out SD Bullion's 500 Silver Eagle Monster Box Sweepstakes!
▶ www.sdbullion.com/SilverSeeker
Want to Support the Channel?
----------------------------------------------------
BE SURE TO:
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
▶ Become a Channel Member! bit.ly/supportss
- Channel Memberships include awesome benefits for supporting the channel, so be sure to click and check them out!s
Get your Silver and Gold Coin Ping Tester!
▶ coinpingtest.com/referral/qQ1...
*This is an affiliate link, so buying a Ping Tester through this link supports the channel!
Check out my Online Store for Silver, Collectibles and more!
▶ www.coolstax.com/vault/
Curious about the equipment I use for my videos? Visit this link to find out what I use in my setup!
▶coolstax.com/products-that-i-...
Check out these Epic Links Below!
_________________________________
▶SUBSCRIBE! bit.ly/2Pa3y0n
▶INSTAGRAM! / coolstax
▶DISCORD! / discord
▶My Website: www.coolstax.com/
▶My Patreon! / silverseeker
▶Disclaimer: coolstax.com/youtube-channel-...
________________________________
Credits:
EPIC Hand Poured Silver Bars and Laser Engraved w/ LaserPecker 4!
• How to HAND-POUR Pure ...
#silverstacking #melting #meltingsilver

Пікірлер: 85

@TtheSilverStacker 9 ай бұрын

From one silver pour artist to another…. Cool stuff!

@erikgrimes3621 9 ай бұрын

it's amazing how fast that solidifies!

@SilverDragoon 9 ай бұрын

Awesome sharing on your pours and equipment!

@Dark.Knight.Cowboy 9 ай бұрын

I spilled a few drops of molten aluminum on my arm , at work, once. I brushed it off as fast as i could. There were two small, deep holes in my arm, but it didn’t hurt. It was so hot (1,350-1,400 degrees) it killed the nerves instantly. I touched a piece that i thought was cooled off, but wasn’t. That hurt really bad for about 5 hrs. Can’t be too careful with that stuff, unless you’re ok with getting disfigured.

@firesidecoins 9 ай бұрын

I love the name of that thing..... Laser Pecker "4".

@hagler5475 9 ай бұрын

Hi Silver Seeker. I appreciate all that you do for the silver community. I use a laser engraver at work. What I do to reduce scorching around some images is I use blue painters tape over the item I’m engraving. I don’t how it would work on silver but any bit of information helps. Thank you for the content and I look forward to your next video.

@TurdFergusen 4 ай бұрын

Thanks for preaching safety

@don951 9 ай бұрын

Very cool! Your pours are looking great!! Cheers!!!

@ResinDragonStudios 9 ай бұрын

Great Job Seeker!!! you can tell you are getting better at pouring 👍👍🤞🤞 they look great! and you know i love the laser 💜💜💜💜

@T-ChillSilverandSuch 9 ай бұрын

I’ve been thinking about doing this for a while but just haven’t pulled the trigger. I may try it soon now that I’ve watched what you did! 👍

@ryr635 9 ай бұрын

Nice pouring Seeker! I like how you poured yours nice and leveled where the maximum bulge can be. That takes skill where often mistakes happen!

@jameswerner2493 9 ай бұрын

I have the same Toauto in my garage. I poured a bunch of silver last year but haven’t found the time yet this summer (bunch of remodeling in the house). Thanks for the tips and the laser is awesome!

@FrostbyteCoins 9 ай бұрын

Shared this out on my channel this morning, we were talking about your making my first channel bar.

@ricktimm3227 9 ай бұрын

Awesome thanks

@SirAlford 9 ай бұрын

Marvelous...A Jack Of All Trades!

@RubberCityRebel 9 ай бұрын

Looks like fun

@erwinwheeler124 9 ай бұрын

Wow that is fantastic. 😮 Sure, do enjoy your channel. Keep up the good work. I'm a subscriber to your channels.😊

@StackingtheSouth 9 ай бұрын

That bar turned out dope. Very cool set up. I have been wondering how it works and now i know. Thanks for sharing. 😁👍🏻

@SilverSeeker 9 ай бұрын

You bet! Thanks for watching!

@aussiegirl6738 9 ай бұрын

Awesomeness always wanted to know how it’s done, wish we had poured bars in Australia like that 🥰

@kalani4ever359 9 ай бұрын

Seekers Microphone is so good, my volume was way to high for that intro😂😂😂

@johnbethea4505 9 ай бұрын

Very neat info

@fatlostmedia1376 9 ай бұрын

awesome video!@

@emilevoyer123 9 ай бұрын

THATS REALY COOL !! THANKS FOR THE VIDEO

@SilverSeeker 9 ай бұрын

You bet!

@FranciscoGrijalva-gj5ck 9 ай бұрын

Hey Silver Seeker! Big Fan of you and Silver Dragons. Great video! But when you messed up and cussed I laughed so hard to the point that I was tearing up. I replayed the clip like 10 times and died. Thanks for everything you do!

@SilverSeeker 9 ай бұрын

ROFL I'm glad you enjoyed the vid my friend. :)

@azwelke2638 9 ай бұрын

Son of a silver nugget!! Nice pours!

@kevinbounds9837 9 ай бұрын

Cool deal

@SasquatchBioacoustic 9 ай бұрын

I think the snake on your bars should be an American rattlesnake, not an Indian cobra.

@SilverSeeker 9 ай бұрын

I mean, fair enough but snakes are snakes to me. :)

@firebirdbullion8123 9 ай бұрын

Nice. Do you then polish it and remove the black? Would love to see the finished product. I pour bars but that laser is next level!!

@lesbianwars 9 ай бұрын

So cool. I want to do the same. But at first with iron plates, because its cheaper.

@JoeyJ1984 9 ай бұрын

Please show front and back when you do the gold bar. Thanks.

@jasonperry7970 9 ай бұрын

Thanks for not editing out the imperfect pours! It's an art. Is your quench water just tap or distilled?

@SilverSeeker 9 ай бұрын

Tap

@michaelsorrell9922 9 ай бұрын

IM RETIRED WELDER, WHAT YOUR DOING IS ALMOST HOT!

@robertduffy5805 8 ай бұрын

Am I the only person that reverted back to the 5th grade and giggled when he said the printer's name?

@TheQuickSilver101 9 ай бұрын

It was really cool to see the entire process. Awesome work! Thanks, Seeker!

@AceBullion 7 ай бұрын

Silver Seeker, Great video. I am looking for and forward to a laser. With my back and designs I am hopeful. If your ever going to sell the 3rd gen I will but it. But I might have to get that 4th gen. The shroud is a shame.

@aCycloneSteve 9 ай бұрын

I want to see how you did the back. Is that in a future video or have you already shown that before?

@SilverSeeker 9 ай бұрын

I've shown it before actually but you can see the finish product for that one on my website at coolstax.com and by entering the serial number ssdtom-007

@johnlucas52 9 ай бұрын

Wow ! Cool video. I was wondering do you make your own molds our do you have an outside company make them ?

@SilverSeeker 9 ай бұрын

I buy them. I don't have a cnc machine nor the skills to use it lol

@richardbillin5190 9 ай бұрын

Now for a really unique pour you should do a pour in a Ant Colony 😃

@Revenant_Dancer 20 күн бұрын

Molten metal is no joke

@ClintonGalton 9 ай бұрын

Those bars!!!!! So I assume you'll be selling these right? Want to know 😊😊😊

@jimdowney511 9 ай бұрын

sheesh-i can barely pour 1/8 oz. jig heads out of lead-great job with the silver-always seem to some problem with the heat on the molds

@godsblade300S 9 ай бұрын

✌️😜 Outstanding content as Always Brother ✌️ God Bless us All ⚔️🇺🇸✝️

@SquareLimit 9 ай бұрын

Cool.. do you lose or burn silver off when you laser engrave? I’m guessing you do but it’s not enough to matter much

@SilverSeeker 9 ай бұрын

I've done a before and after weigh before and it's never made a difference so if there is a loss it's miniscule.

@Crimin4L 9 ай бұрын

why is there like a blue shatter effect on the exposed sides of the pour ( @9:55 )? That looks sooooo dopee

@SilverSeeker 9 ай бұрын

I'm not 100% sure I wonder if it's the minerals in the water I quench them in. The quench pan is also copper so maybe that's it? Sadly unknown but yes very cool. :)

@fatlostmedia1376 9 ай бұрын

i think thats just lighting

@SilverSeeker 9 ай бұрын

@@fatlostmedia1376 it's visible under other lighting too

@lesbianwars 9 ай бұрын

Can i use the LaserPecker 4 for 100g silverbars and also 10oz silverbars? Is it only possible to use it for 1 oz Silber?

@SilverSeeker 9 ай бұрын

You can use it for many things including large Silver bars yes. There are even attachments so you can engrave onto Metal Tumblers etc etc.

@lesbianwars 9 ай бұрын

@@SilverSeeker Thx a lot. Thats great. I will collect metal bottle cap on the streets at first. To test the machine. But i will order it in the end of the year.

@NickelNationCoinsMore 9 ай бұрын

👍

@goldensadventures1229 9 ай бұрын

Level the surface 😮 maybe that’s why my bars look so ugly 😅

@jamesd4013 9 ай бұрын

waiting for the "MEGA Pecker" before I commit! hahaha interesting video

@fatlostmedia1376 9 ай бұрын

only improvement I could say is it would be mucher nicer to level out the back/front of the bars and make the flush & even, and the more polishing/hammerin or overall much more intensive finish the better. I prefer stamps or pressed bars, but the laser is cool that you can pick literally any design & it can be done quickly & make it much more efficient.

@cosmiccreations888 9 ай бұрын

Your Molds needs to be Much Hotter to lessen the bubbles on the backside :)

@SilverSeeker 9 ай бұрын

Not sure how to get them hotter I had the torch on them.for a lot longer than shown in the video they were dang near glowing

@cosmiccreations888 9 ай бұрын

just a very simple Map Gas Torch stands is what most people use as it is usually left under the flame fo 4 to 5 minutes and yes I think your bubbles was from moisture es caping when hotter mold will remove moisture Before and silver get poured@@SilverSeeker

@SilverSeeker 9 ай бұрын

@cosmiccreations7124 aye I agree I figured the same I was a little surprised because without the light on the molds were dang near glowing lol. I'm still learning so bound to make mistakes here and there, I'll try to get them even hotter next time. Also need to get a torch stand. :)

@cosmiccreations888 9 ай бұрын

All in Good time My Friend Yes you are Well on Your Way !! :) :) @@SilverSeeker

@TheMarky26 9 ай бұрын

My girlfriend says i have a lazer pecker too..

@Jrome3 9 ай бұрын

Laser pecker? Too easy.😐

@SlickCat 9 ай бұрын

The cost and energy you used to melt the Silver is more than its inherent value. 🤷🏻‍♂

@SilverSeeker 9 ай бұрын

And your point is... what? "Inherent Value" is irrelevant. You can view the ocean on your TV Live... so would you argue that the cost of going to the beach is more than its inherent value?

@SlickCat 9 ай бұрын

@@SilverSeeker My point is silver is 28 dollars an ounce. The electricity you used to melt it down, laser engrave it, along with the time you spent is a loss for you. 🤷🏻‍♂

@SilverSeeker 9 ай бұрын

@@SlickCatthe time you spend going on vacation is a loss, so is eating out at a restaurant here and there instead of making something cheap at home. So is going to see a movie at the theater instead of waiting for it to be streamed at home for free or way cheaper at home just months later. But we all enjoy doing those things occasionally because otherwise life would be boring. What I'm trying to say is that if you enjoy doing something then there is value in that. The little bit of loss incured becomes irrelevant at that point. Thanks for watching my friend.

@DevineAbyss 9 ай бұрын

@@SlickCatAn artist (especially a painter) will have to buy paper, paint, brushes and frames. Then he will "waste" the paint and paper and wear out the other things. None of the things have more value after the painting is done, unless someone values the actualy painting. Something different in his silver pouring is that his works actually have value, no matter how much he would mess up or how ugly they become, because the material is inherently valuable. None of his around 900 dollars worth of silver was lost in the process. Only the energy and some wear on his equipment. So I'd argue he could sell his works for a much higher percentage of his cost than any bad painter could. But yeah, he said it's mostly for fun. Flying drones or going on vacation also does not increase your net worth. Neither does owning a comfortable couch or a nice grill. Most things in life don't serve the point of increasing our wealth. A comfy life and hobbies that you like are also important. It only happens to be that his hobby has some proximity to stacking/investing. If he only cared about minmaxing his stack it would likely not qualify as a hobby anymore.