How to Haul a Motorcycle with a Truck BY YOURSELF!

Рет қаралды 145,699

Күн бұрын

Sign up @ yammienoob.co to join our Discord and get automatically entered to win our giveaway bikes
Equipment Featured in this video:
Folding Ramps: amzn.to/3NWJs9K
Wheel Chock: amzn.to/3WTkvA3
Straps: amzn.to/3NUH2sj
Canyon Dancers: amzn.to/3TreoA7
Kendon 3 Rail Trail: www.kendonusa.com/products/st...
00:00 - Intro
00:37 - Equipment Needed
03:24 - Things to Consider
06:32 - Load Chock
08:32 - Setup Ramps
11:06 - Ride Bike Up Ramp
13:48 - Strapping Bike Down
20:20 - Unloading Bike
26:02 - How to Load a Trailer
Buy your bike from www.rideeurocycle.com - They ship straight to your door!
Our best videos: bit.ly/Best-Videos-Yammie-Noob
Our Best Selling Street Glove: bit.ly/valencia-street-glove
------------------------------------------------------------
Best Beginner *Sport* Gear:
Helmet: bit.ly/SS900-Helmet-ECE
Jacket: bit.ly/wapenshaw-jacket
Gloves: bit.ly/valencia-street-glove
Boots: bit.ly/Z1R-Boots
Best Beginner *Dual Sport/ADV* Gear:
Helmet: bit.ly/SS2600-ADV-Helmet
Jacket: bit.ly/Hammer-Down-ADV
Gloves: bit.ly/Firstgear-Airspeed
Boots: bit.ly/AR1-Race-Boot
Best Beginner *Retro/Classic* Gear:
Helmet: bit.ly/Arai-RegentX
Jacket: bit.ly/Armored-Shirt
Gloves: bit.ly/4SR-Monster-Gloves
Boots: bit.ly/CTA-Leather-Boot
---------------------------------------------------------------
FAQ:
What should my first bike be? A Turbo Hayabusa.
Very funny, no seriously. What should I get? A TURBO BUSA.
What is this channel? The premiere source of motorcycle edutainment (educational + entertainment) on KZfaq. We take on everything from the best bikes you should buy all the way to praying to our lord and savior Rossi.
Why should I subscribe? Because you want the highest quality motorcycling videos on KZfaq delivered to your feed every single day (seriously, we do daily uploads)
Why do you guys make these list videos? Like any good capitalist, we supply the demand the market has.
Music: amplelife.bandcamp.com/
NOTICE: Elements utilized from other videos are fair use and fall under U.S. copyright law because it is transformative in nature, uses no more of the original than necessary and has no negative effect on the market for the original work. It is against the law to fraudulently claim a copyright on a video you do not own under the DMCA or to abuse KZfaq’s copyright claim tool.

Пікірлер: 240

@yammienoob Жыл бұрын

Equipment Featured in this video: Folding Ramps: amzn.to/3NWJs9K Wheel Chock: amzn.to/3WTkvA3 Straps: amzn.to/3NUH2sj Canyon Dancers: amzn.to/3TreoA7 Kendon 3 Rail Trail: www.kendonusa.com/products/stand-up-dirt-bike-trailer-folding-sport-bike-trailer

@se7vnlaw659 Жыл бұрын

👍

@leoglasmeyer2853 Жыл бұрын

Sweet, now i only need a truck, and a bike.

@cdbrown30 Жыл бұрын

Sammmmee

@301bruce Жыл бұрын

Lmao

@chelsyjones4017 Жыл бұрын

😂 same !

@jafryicus5304 Жыл бұрын

im basically there bro got my subaru outback and a ct200u lmao

@aaroncieslukowski7532 Жыл бұрын

I'm only here for the truck, I got the bike 🤣

@tototicas Жыл бұрын

HUGE TIP WHEN UNLOADING: Bikes front tire will have less grip since truck beds arent always grippy and physics puts more traction on rear wheel which is on ramp. Put bike into gear and use clutch to help slow the bike down as well as front brake when unloading. Learned the hard way unloading my dirtbike when it was in neutral and front tire brake just make front wheel slide. Almost ate it. Using clutch was much safer and controlled. Using both is key.

@shawnclarke7 Жыл бұрын

I use both the front brake and bike in gear.

@billparker8954 Жыл бұрын

Nice tip.

@francoalfaro7750 7 ай бұрын

🙏

@broc2727 Жыл бұрын

I've been hauling my bike around for 40 years in the back of a truck. I don't always use a wheel chock when hauling, it's not needed but I have a Baxley wheel chock if I choose to use it. I also tie the rear end down from the rear foot peg brackets, works great.

@kernjn Жыл бұрын

Good video! Have two things to add: 1. If the bike has an easily removed seat, take it off and put a towel to sit on. Gets your feet flat on the ground. Very helpful when the middle of the bike is over the foot of the ramp. 🙂 2. When backing the bike down, put it in gear and pull in the clutch. If you start to feel it slip, you can let out the clutch along with using the front brake for stopping.

@pitchforkpeasant6219 3 ай бұрын

👍👍😊

@BrianCollins Жыл бұрын

If you don't have ramps you can backup into a ditch and the tailgate on a standard truck will land into the dirt of the opposite side of the ditch. Good for loading up the riding mower too.

@TheBajamin Жыл бұрын

LOL this is exactly what I do behind my house.

@rider6.0 Жыл бұрын

Just convert your truck to a Alabama squatted truck hahahahaha lol 😆

@thomasdausch8557 Жыл бұрын

yep use to load up a xr-200 into my pick-up a million years ago

@GearHeadGeeks Жыл бұрын

Probably one of the must useful videos you have produced. Been riding al loading bikes for decades and your ramp usage is something I am going to use..

@lpete531 Жыл бұрын

I agree 👍🏽 very helpful for sure

@seangriffith9469 Жыл бұрын

Something that Yam didn't mention that is good practice is to take your key out of your bike and put it in the glove box of your tow vehicle. Therefore it's always with you and won't lose it.

@LordMcKrakenVonLittleBits Жыл бұрын

To anyone that feels like this is overkill doesn't understand how much work it is to repair a bike that's been dropped while loading and unloading. As much fun as loading fail videos are to watch this is the one every rider needs to see top it all right.

@thomasdausch8557 Жыл бұрын

This is the very best video you have ever produced, excellent explanation on every aspect of transporting a person's pride and joy. keep up the great work,sir and i hope you enjoy your next track times

@michaelfink2070 Жыл бұрын

Great video/explanation/demo. One thing you might want to consider, for those who live in a wet climate, spray your ramps with bedliner material. Loading a bike with a wet steel or aluminum ramp can be death defying, they are incredibly slippery; I saw someone eat it just walking a dirt bike up the ramp in the wet. Also, unloading, I always have the bike running and in first gear so I can feather the clutch to get "rear braking" while having my feet off the pegs for stability and, of course, the front brake to do most of the speed control. The big thing loading and unloading is "commit". If you try to stop in the middle of the ramp going up or down, bad things can happen. If you start sliding going down the ramp, just stay on the brake and ride it out. Going up the ramp, make sure you have enough speed; if you don't make it all the way into the bed, don't "goose it"; you will often break rear traction and wind up with a damaged bike (or body). Just let it roll backwards (like you're unloading) and give it another try.

@robertschneider6579 Жыл бұрын

I have been teaching since 1974 and spent 10 years in administration supervising teachers. You are an excellent teacher! Thank you for this excellent video!

@KD0083 Жыл бұрын

I can totally picture Whitney laughing at ball mount

@jeffheater6544 Жыл бұрын

In the NW, we call them clevis or hitch pins, cotter pins are something completely different :)

@jimh2061 Жыл бұрын

Great video! As a new rider I would search my surroundings for a slight hill to straighten the ramps out more horizontal. Won't have to worry so much about feathering the clutch. Or not commiting

@lordraiden5398 Жыл бұрын

In 2014 I drove from Detroit to New Jersey to pick up a 1989 Yamaha FZR1000. It had all the original bodywork, had only 4,002 miles on it and was last registered in 1991. The seller helped me load it with his ramp. Got it in and strapped it down no problems. Got home and used my........shorter ramp to unload. Backed it down the ramp walking beside it. The exhaust hung up on the ramp and I lost my balance. I jumped off the ramp still holding on to the bars and the bike started falling over on to me. To this day I don't know how I held this 530 pound motorcycle up and guided it down the ramp leaned over.

@billwesley2213 Жыл бұрын

Yay!! Yammer said 4” is significant! There you go, Sharon.

@smoothboye4203 10 ай бұрын

I use my long bed ranger to transport bikes. 7 foot bed fits a lot of bikes with the bed closed, and it's nice and low

@haroldshull6848 Жыл бұрын

Have used a 3 rail trailer since the 70's. Easy with the 10 or 12 inch tyres on the Home Depot DIY trailer. Liked the steel mesh on yours between the rails. That was a bit of a dance just walking on the rails and cross beam for the center bike... Commitment - like that approach. Did it with a Chevy van for a while. Down the drive a few feet, up the ramp, into the van, stopping before hitting the engine cover. Laughed at myself a couple of times down the road having done it right the first time with the Commando. Top of my head still intact. You're doing fine, Yammie - keep this life style happening -

@skynethell 11 ай бұрын

heres another tip from my wheelchair hauling experiance. IF you have a ramp and its just a little too steep then heres what you do = back ur vehicle up and setup a ramp to a curb. From the curb load your bike up. It'll be a whole lot easier.

@LuisFlores-gs8qv Жыл бұрын

Mind blown! Full of good safe motorcycle loading info, no BS definitely something to learn from this video that I will practice for my next trip loading my Harley Sportster🫵👍🤘

@sikolikhole Жыл бұрын

Save your money buy a good strap. Only need one. Run a strap once around right fork. with that same strap pass to left fork run one loop around. Attach the end to your truck mounting point. Snug secure but not too tight. Strap will self tighten if bike lens.

@tommissouri4871 Жыл бұрын

Amazing how tens of thousands, maybe hundreds of thousands, have loaded bikes using a couple of 2x10s and a few straps from the local motorcycle or lawn equipment store over the last 50 years instead of nearly $1000 of shiny goodies from Amazon.

@cody-2536 Жыл бұрын

I thought the same thing.. 3 - 6ft long 2x10s have worked wonders for me .. instead of dropping almost 500$ just for foldable aluminum ramps.. also use 2bys and Ihooks for my front wheel chalk

@idkofone Жыл бұрын

I have a 21 Rebel and the last bike I bought I mentioned I’ll just lower my truck. The guy was so confused haha. It’s a great feature!

@mr.waffles777 Жыл бұрын

Bro he was sooooo clean when riding that bike up the ramp

@markhall3434 Жыл бұрын

Love those new tech Ratchet Straps and your method of tying the two ramps to the trailer hitch. I have a similar setup, but nowhere as secure ramp tie down. I also did the Harbor Freight Chock mounted on a cut to length piece 2x10 to fix it in the center. I also put a deposit on a new 2023 XSR900, April delivery..

@fjones1914 Жыл бұрын

I use two Big Dog folding ramps. One 8' & one 10'. I ratchet strap them both to the hitch loops on the frame. I walk/ride my '08 GSX-R 750 up into the bed of my F150. I also use metal bars that latch into the tailgate for added strength for the tailgate.

@pkdude5334 3 ай бұрын

this is the most thorough explanation and demonstration I've seen of loading a motorcycle into a truck or trailer.

@Kwicksand Жыл бұрын

Thanks Yams I believe every Motovlog/bike channels should show there method. Because transporting a bike is so scary to me for now! just love to see different ways to do but it the correct way! Thanks again bud!

@96blackjacket Жыл бұрын

Just got to the towing section and I just wanted to mention since I regularly install hitches for my job that pretty much everything can have a trailer hitch put on it I’ve done Tesla model 3s, Prius’ , Camerys, altimas, a 1988 international semi a dude converted into a truck, 2 different public transport busses one that had been converted to an ice cream truck one that was more of a road trip machine, and various other odd things you wouldn’t expect to be able to have a hitch and wiring put on it. Most if not all vehicles can handle at least 1000 lbs towing. Not that is combined weight so trailer and bike along with anything other then you in the car like gear or friends. I.e you have a 300 lbs trailer and a 300 ish lbs bike for 600 lbs that leave you with 400 lbs of gear and friends/other people you can have in your car. Hope this info help all my fellow squids and safe riding/ towing.

@MasterBlasterSr Жыл бұрын

Ive seen this when Yammie picked up my 400 last week, he loaded bike right up and strapped it down, the ramp and chock setup are perfect and worth the $$,,,, I gotta get the air suspension now. Ive seen a cable break but on an old truck with cement bags, much heavier than a bike.

@Jaxon-iu6vb Жыл бұрын

Front tire in the front left corner of the box, back tire in back right corner. Close tailgate if possible 1 ratchet strap from the right foot peg to the front right corner of the box 1 ratchet strap from the left foot peg to the back left corner of the box. Congratulations, that bikes not going anywhere.

@iCraftSouls Жыл бұрын

This is the way

@mainebiker Ай бұрын

Man this video hit every point i needed answered. Even down to the truck and bed size. Im currently looking to buy a ram 1500. Thank u very much. Keep up the great vids

@markbrautigam1742 2 ай бұрын

Thank you so much! You explained everything very well.

@serenetynow Жыл бұрын

For the trailer, ALWAYS pin the hitch latch.

@rider6.0 Жыл бұрын

Excellent. I just put 2 rachet strap around the fork legs, and 2 around the rear rim. No pressure on the suspension

@ryansandefer6887 Жыл бұрын

If you transport bikes often, buy a Kendon trailer. They are the best. They take up very little room in a garage when stood up, you can scoot them near a wall and you lose like 5 X 1.5 feet of floor space. So much easier than big ramps and big elevation going into a truck bed. And you don’t need a truck to pull an Kendon. My buddy installed a small hitch on his VW GTI and it pulls it with zero issues (with a 2 rail Kendon I might add…). Plus you don’t have to buy large, cumbersome ramps as well. Great video, I also recommend tying down at the base of the front shocks. There’s zero load pulling down on the shocks and it will hold just fine. It’s bad for fork seals to have prolonged pressure pulling down on the front forks.

@andrewbecker3700 Жыл бұрын

I've always just used my spare tire as a front wheel chock. If you lay it face down it's usually fine. You can use blocks of wood to keep it centered in the bed if ratchet straps can't be used.

@ghostsmoke11 Жыл бұрын

I have my first track day this weekend and I'm loading up my bike tomorrow morning, thanks for the video yammie!

@alexlau7115 Жыл бұрын

suprisingly legit instructional video there. was not expecting this from yam

@craigstrong2069 Жыл бұрын

Ripper of a video. The most informative and best video of yours I have seen. And I have been watching for a long time 🙂

@jabjab1010 Жыл бұрын

Good vid. Thanks. I notice your lifts in the background. Harbor Freight cheapos. I have one too and like it. I replaced the too small chock with the one they sell separately that is MUCH taller and beefier. It works very well.

@dkindig 11 ай бұрын

I use the taller wheel chock that they sell in the back of my pickup and it works great! I cross straps to the front corners of the bed to keep it in place. I think when I bought it was around $70. It was also very handy for measuring and setting sag.

@brentjordan8111 Жыл бұрын

you did the video! thanks for showing us how to load and properly strap down the bike when we were at the shop!

@victoriadime9057 Ай бұрын

This is an amazing explanation OMG! 👏🏾

@wfodavid Жыл бұрын

I use the Condor. Much lighter. For dirt bikes you don't need anything. My favorite dirt bike ramp is the StepRamp 5-Step Loading Ramp 72". Getting the 1250 RT in the back of my F 350 isn't too bad. Never been a fan of canyon dancers but many people use them. Ride my dirt bikes in the truck. Always walk the 1250 and 790 in and out. You made driving it in and out look easy. I think Id be too chicken.

@uniseat1313 Жыл бұрын

Watched the whole video even though I’ve done this a million of time. Lol. But did learn something new so worth it!

@charlier6566 Жыл бұрын

Thank you Sir! This info came at just the right time for me. 👍🏾

@EZBlast Жыл бұрын

Dad Yam!!!! - lol - nice job channeling your inner dad energy!

@davidelizabeth4933 Жыл бұрын

The wheel chock and canyon dancers take up unnecessary space and are a waste of money. And don't ride the bike up and down. Walking the bike using clutch, throttle and front brake gives better control, especially for shorter riders. Use one ramp for bike, other to walk beside. If you're anal about your truck, use block of wood to protect back of cab from front wheel dent. Once bike in, kick a piece of wood behind front wheel preventing possibilty of bike rolling back. Can use another piece of wood under kick stand to protect truck bed. Use endless ratchet straps, preferably with 2" webbing. Run webbing around bottom of forks by axle nuts. Use lowest and forward most attach points of truck so straps are pulling bike forward and down. Sturdier than canyon dancers with no load on front suspension. Make sure you use both front brake and clutch with bike in gear when unloading bike.

@jasonking4209 Жыл бұрын

Yep, sounds exactly like how I do it. But they make that useless crap for people that don't know any better.

@dmv9076 Жыл бұрын

Thanks for valuable info. Also nice purchase from eurocycle in Las vegas.

@Caballero_Corazon_de_Plata Жыл бұрын

Very useful for the new riders like me. Thanks

@alimyhap3033 Жыл бұрын

Great video! Very clear and methodical instructions. Thank you!

@tommyescobia8381 Жыл бұрын

You asked if there was anything we could add. I have almost the exact same setup, folding ramps, truck and straps. However I do not have the airbag height suspension adjustment. I have an older 2010 ram Cummins long bed. Although I have the tailgate air gate. I have the 10ft black widow folding ramps. Now what makes the difference between the safety for others especially my truck is kinda high. Is that I have Installed a 2500 lb winch. Wife got it for me at harbor freight or tractor supply for @$80. It has a battery remote and safer for the folks that cannot commit. I personally power walk it up the ramps. It’s a bit safer. But then again, having adjustable ride height is a plus, though I don’t have it. So, long story short, a cheap winch!!!! It really works in so many ways!!!!

@screamflight1044 Жыл бұрын

Bruh, I was just struggling with loading my Tuono 660 onto my truck, and here you now are showing the world how to load a motorcycle on a truck and using a Tuono 660 as an example

@pinkysgarage4517 Жыл бұрын

Really impressive video. Well done sir. Thank you so much!!

@joecamel6835 7 ай бұрын

This is the info I needed !

@artiecisneros4691 Жыл бұрын

Wonderful instructional video, thank you. I have a Honda fit and looking to install a hitch and get a trailer for my street bike.

@yammienoob Жыл бұрын

Do it! I love seeing normal cars towing stuff. It's totally doable, just make sure to not overload the trailer and the weight inside the vehicle.

@artiecisneros4691 Жыл бұрын

@@yammienoob Thank you I will certainly keep that in mind.

@BackwardsR3LLIK Жыл бұрын

I followed the instructions, now i have a truck-cycle hybrid. Nice 😃👍

@charlier6566 Жыл бұрын

FYI, I just purchased two 8’ ramps from Titan Ramps. $99 each! They’re currently having Black Friday sales. Free shipping. Pretty happy with my purchase. 1000 lb capacity each. All black. Aluminum. Hope they’re as good as the product description. Lol Anywho, just excited and wanted to share.

@chipcj4819 Жыл бұрын

Video Request- Picking up Your DS off pavement/gravel/dirt . Have a new one and dropped it and needed help getting it up. Hadn’t thought of all the situations I might need to be able to do it myself. Thanks for the loading video, have a Tundra and the Sled fits nicely corner to corner with tailgate up and locked.

@MotoDash1100 Жыл бұрын

There are videos out there of a 5'5" female picking up a heavy adventure bike like a BMW GS series bike. Same thing for picking up a fat cruiser. You have to squat/walk it up and backwards. If bike is fallen on it's left side, 1. Turn the bars to the left, grab the bars, not the clutch (for safety) woth your right hand. 2. Line your butt up with the seat, but just to the left side. 3. Left hand goes on a sturdy part of the tail (sissy bar, subframe, etc) 4. With your feet in front of you, push the bike backwards and onto the tires. 5. Keeping your position, take the right foot and swing it behind you to put the kickstand down. IF YOU FALL ONTO THE RIGHT SIDE OF THE BIKE: Step 1 is to put the kickstand down ahead of time And all other steps will be the same except for the front wheel, turn the bars to the right, and hold front brake down while you go backwards, everything else is the same.

@g.j.oyzonjr7616 Жыл бұрын

Best video to self load and unload a motorbike from a truck thanks so much yammie

@disposablehero5008 Жыл бұрын

Picking Up a 2021 MT10 in the morning ✊. Long truck haul

@vicpnut1 Жыл бұрын

That’s much better than the “plank and a bank “ system I’ve used …….and who knew there was an awesome item such as the “retractable ratchet straps “ ? I just researched about a year ago and bought a set , and never in my amazon / online search did a retractable set come up….todays add the “retractable “ prefix and there’s a long list of brands etc…..now I’m tempted to buy another set of lighter duty less than (5k lbs break point ) my SmartStraps 14’ Ratchet Straps, 2 Pack -5,000lbs Break Strength, 1,667lbs Safe Work Load -Commercial Tie Down Straps for Heavy Duty Cargo, Haul Equipment and Vehicles…..which I knew was overkill but figured more is better at that point , now I know retractable is better…🤯🤷🏼‍♂️

@TwinTurboTwinz Жыл бұрын

never seen those straps going to definitely order a pair

@janrico904 Жыл бұрын

i do this in a vessel /big boat. not that complicted. a long single rope. done !!

@ryanmurthi8347 Жыл бұрын

Bro you are reading my mind with alot of these videos.

@TheDucatiPilot Жыл бұрын

Of all your videos, this was definitely one of the best and most helpful. Thanks, brother!

@atomicdmt8763 Жыл бұрын

well done...........smooth as butter

@J.A.Smith2397 Жыл бұрын

One of your most informative videos if yask me, well done good sir, well done

@noze_yt Жыл бұрын

Can't believe I watched this whole video. But I'll be ready if I ever own a track bike.

@texasman1000able Жыл бұрын

I never ride up the ramp..I just walk it up using the friction zone, too easy. Also, I have cruisers so I need every inch of ground clearance on the breakover. My truck is a Honda Ridgeline 😉

@usmanzafar1739 Жыл бұрын

I was like searching this topic on google today!

@milesb4231 5 ай бұрын

Great video! Keep in mind your Ram has a 2000lb rated tailgate. I've seen other trucks with issues handling weight.

@francoalfaro7750 7 ай бұрын

🤯 BEST KZfaq VIDEO EVER!!!!!!!! I'm gonna be bringing all my business to you!!!!!

@blippacg Жыл бұрын

Good video, thanks.

@carthius Жыл бұрын

When i got my first bike from the Dealership last month. The guy at the dealership saw i really wasnt sure how to go about tying down the bike. Said all i needed was 2 straps and (though wasnt suppose to help me strap it down he did). He had me put it in the back of my truck and leave it in first gear then strapped the front of the bike down with 2 straps (no wheel chock)... It felt sketchy af but it worked. I was about to tie it down 4 ways to Sunday like you did in this video myself.

@jasonking4209 Жыл бұрын

The guy at the dealership was right, 2 straps is ALL you need. If you put it in sideways, you can even get away with one.

@Cthooligan Жыл бұрын

I use a third ramp so I'm not putting weight on the edge of two combined ramps. Not sure if that is necessary, but makes me feel better. One smaller ramp for each of my legs should I need to put a foot down to save a drop, and one beefy boy in the center for the bike itself.

@blainehouser4354 Жыл бұрын

Great Video!

@thomasdausch8557 Жыл бұрын

I have not visited your channel in a long time, this video made me want to hit the subscribe button

@shawnclarke7 Жыл бұрын

One thing that wasn't mentioned is to be very mindful of the ramp angle so you don't high-center the bike. I bought a utility trailer that has a drive-up gate. The first time I was loading my bike (MT-07) I walked it up but using the bikes power and as I crested to top, the exhaust caught the top edge. So be mindful of that because that can cause you to drop the bike or damage the exhaust if you go too fast. In my case I was lucky that my trailer has a dump feature so I could tilt it slightly which effectively lowers the tail and decreases the ramp angle. I would put jackstands under the rear edge of the trailer to prevent it from going fully into dump mode.

@thomasdausch8557 Жыл бұрын

did same thing when loading my busa,, changed angle of ramp and problem solved

@willieboy8798 Жыл бұрын

if it is off road ....yes subtle differences my azz..... if you own a bike or two as i do ...i have several AND i have several trailers.....edit dont forget the weight of haul! dont forget trailers can also haul sleds, jet skis and quads ... we run guads with skis rather than a snowmobile season is too small to own one! your video is probably the most complete that i have seen... good video!

@joshuazorn5652 Жыл бұрын

Thank you

@16STUDIOSFILMWORKZ Жыл бұрын

I like my bike should be hear any day so stoked

@moorepower13 Жыл бұрын

Never ever use any ol' ratchet straps. They are the fastest way to blow out your fork seals. The ones you showed are intriguing. But once you are in the front chock just an inch or so of compression on the front forks is all you need. DO NOT BOTTOM THEM OUT.

@yammienoob Жыл бұрын

That's what I said brotha

@jsmith6145 Жыл бұрын

Can confirm, definitely blew my fork seals when I picked up my first dirtbike

@langhamp8912 Жыл бұрын

You can, instead, use the ratchet straps on the bottom of the front forks instead of the (moving) body of the motorcycle such as the handbars.

@moorepower13 Жыл бұрын

@@yammienoob you did, you did. But I was just making sure the folks in the back of the room heard ya.

@413Glass Жыл бұрын

That is one of the most helpful videos you have done in some time!!! Answered so many questions that I have for loading and unloading a bike in my truck AND the trailer I’m interested in buying you have and used in your video!!! Fantastic!!! Also congratulations on your recent nuptials!!! RG

@shegocrazy Жыл бұрын

4:25. That 4" makes all the difference ;)

@seamoose8177 Жыл бұрын

Hey I love the videos you put out. They are really helpful and insightful. I am rather new to motorcycles in general and I have noticed something. I have yet to see anything about a real wheel steering bike of any kind. I was wondering if it is even possible to build , and would the learning curve for riding it be to much?

@eliasjohansson8962 Жыл бұрын

Try reversing your bike down a hill for example. Gets very sketchy when you start turning...

@thomasa5619 Жыл бұрын

Ever driven a forklift? Rear wheel steering handles weird The vehicle tends to rotate around the fixed wheels. With the fixed wheel at the front, a small amount of steering input changes the angle of the vehicle to a greater degree, so it’s less stable? I guess with proportional power steering tuning you could make it handle ok Many newer cars have small amounts of rear wheel steering that will rotate the car more at slow speed and crab walk it sideways more at high speed

@seamoose8177 Жыл бұрын

@@thomasa5619 thank you for explaining this

@Cokecanninja Жыл бұрын

Once knew a dude who was jacked as fuck, and also rode a lightweight bike. He could pick his bike up off the ground and put it in the bed of a pickup.

@East_TX_LCR Жыл бұрын

How do you feel about bolt in tie down loops? I've seen them on cyclegear, bike specific, attaches to a bolt, basically a 90 degree piece of metal with a hole in each end. Waste of money? Or handy?