Have fun! (I would have thought there might have been some the right size by now?)

Good to know. There’s a few things to do to the GS, but I know most people don’t come here for that! All my Ireland videos will be on it, so will see how many I drive away! Cheers

Glad it was helpful!

I’m sure that in time proper 300 levers will become available. It’s just taking a while to filter down. The stock ones are fine, and it’s only really a thing for two finger clutch operations. The levers seem to be everywhere and are cheap. I just hope they last! (Though with the handguards there’s a fair bit of protection for them.

@@PeakMotorcycles I ordered these short levers from e-Bay last week. It will take them a month or more to arrive. I’ll be upgrading the Rally with the skid plate, hand guards, tail tidy, exhaust, etc. from BikerzBits soon. The Double Take mirrors and the Garmin Zumo came in this week, as well. The mirrors are excellent. I got a set for the KLR, also. Thanks again for all your upgrade recommendations.

The levers came in today's mail. This video will surely help when I do the install. Thanks again!

You’re welcome. I am running out of things to do. Must be nearly time for a new bike!

Good point. I’ll measure them. I thought I had about the same play in stock as the replacement, but it may be that both needed a shim! I’ll check.

So will the levers from the 2022 300L fit on my 2022 crf450x

@@robertlambert7906 no idea I’m afraid. I’m not expecting any 300L changes but I don’t think the 2022 models are confirmed yet. As for the 450X, not a clue I’m afraid. Google perhaps?

You are welcome. I’m having a bit of a break at the moment but normal service will resume shortly.

You’re welcome.

I’m trying to keep the videos as short as possible (though folks seem to watch 30-40% regardless of duration…) so it’s either take out or speed up, and I think speed is more helpful!

@@PeakMotorcycles Make vids just over 10 mins for max ad revenue

@@Terry-Tibbs not sure I’m at the ad revenue monitoring stage just yet 😉. I think I’m still at the ‘doing a video whenever I have time stage’ 😁. For the pennies it produces, it’s still very much at the what fraction of minimum wage level of revenue. If it ever ceases to be interesting for me, I’ll stop. I have a day job and I doubt this will ever replace that. Good to know though. Thank you!

@@PeakMotorcycles But when you are these vids will bring in more income

@@Terry-Tibbs I think I got lucky with the CRF300. When they came out in Thailand I was disappointed that they weren’t coming to the UK, so when they were announced, I called my local dealer (in December) to order one, not knowing they would be so popular and with such a waiting list. I’m sure that drives viewing numbers. Currently the video ad revenue is about 30p/h of recording and editing time, so it’s a long way to go before it’s even close to minimum wage or an income, and even now it’s tricky to find content and time for 2-3 videos a week. It is still fun though, so I guess I’ll keep going for a while, perhaps switching to a new bike. Himalayan perhaps, or seeing if I can convert a BMW G650X to an adventure bike.

Rykas?

@@PeakMotorcycles Yes, Rykas. Great to meet you. I hope you had a good ride and didn't get caught in the downpour later.

@@chrisallen5548 we managed to avoid it for a while but got caught in a downpour just before the Riverside South Downs cafe. No space inside but had some shelter under a big umbrella outside. Then it started again… one more big soaking just after we left heading up to Whiteways and then mostly dry. Last stop was Newlands Corner where we were under cover when the heavens opened and managed to wait it out with a bit of cake. The ride back to London was a bit damp with spray but nothing too bad. I hope you had a good day out and managed to avoid the worst of it. Good to meet you too!

@@PeakMotorcycles Managed to escape yesterday but got caught in a downpour on the way to an AIM meet. Hopefully summer will return soon.

Yup. I'm sure they'll be better and will fit out of the packet. If I didn't have handguards, I wouldn't have fitted unknown aftermarket levers.

Thanks Luke. I’d tried to find some AT Enduro Pegs, but they are rare as hens teeth.

You're welcome!

I couldn't find any Zetas anywhere in stock, and these are just cheap copies from China from eBay. Interesting that the Zeta ones say that they fit both... I don't think I'm the only person who found the clutch lever needed drilling out. Maybe mine are for an earlier version of the 250? The levers I have definitely came with a 7mm hole and needed an 8mm to fit the stock bolt. I don't have a 250 to check I'm afraid.

Hey. I’m trying to buy the same leavers but on Amazon. What year of CRF 250 your levers supposed to fit? I was assuming 2020? & what crf model? F, L, R? Let me know please thank you.

Thanks. You too.

I think they are out but no one has stock. I’m sure they will catch up eventually.

🤣 if I was doing it for the $ I would have given up long ago. I’ve another 10 to do from the show, and then I’ll do one last one for the year and take a break for six weeks. Back in Feb with renewed energy and some more content I hope!

@@PeakMotorcycles thanks for responding, it is always a pleasure to rear and watch all your videos content 🇺🇸🎉🍾🇺🇸

True, but it is short enough to clear two of my fingers when pulled to the bar, which was the aim. There’s also a reason there’s a ball or ring on the end, which I guess you lose with cutting the stock one. It is cheaper though.

@@PeakMotorcycles It's true, but in the Africa Twin I made a screwed aluminum plate, which replaces the ball...I'm also trying to understand if I can adapt a MTB lever on an original basis. .

Thanks. I think there are now proper ones out there which don’t need to be drilled, but at the time this was the least worse option.

Thanks. I’m a couple of thousand miles in on mine and so far no problems…

Thanks

Yup. That’s the perfect solution. Harder to go back to if you decide to return to stock, but Honda will always sell you an OEM one if they can.

@@PeakMotorcycles What I do is round off the edges and now I am thinking of plasti dipping them with plasti dip (red). But only a little portion of the handle where the two fingers grip the lever.

Well, these have adjustable reach. Not sure if the stock levers do.

Apparently some of the Honda OEM 250 levers fit without modification. Not sure how that works, but it’s probably fine. Though more expensive.

Hi, I did, but I rode it and tweaked it. It wasn’t much. Perhaps half a turn.

Thanks

You’re welcome! I’m still hoping some more ‘300 specific levers come out so this is no longer needed!

Hi, The links to what I bought are in the video description with links to UK and US eBay.

It still moved a bit. After the video I added a washer, which helped. I expect you could do the same with the stock lever.

I think so, but I haven’t tried. The clutch switch still engaged so I guess so. I’m travelling at the moment so can’t check I’m afraid.

It may look, but it doesn’t come into contact and clutch operation is not affected. I’m 2000 road and trail miles into it now and still using the same levers.

Humm, mine hits but shifts fine. Have to look at it again. The length of the bend and overall length is shorter. I like the shorter length. Have to fiddle with it

Not on mine. There’s no headlamp switch on the front of the button housing.

#Legend 🤣🤣🤣

Good question, but unfortunately I don’t have a 250 to try my 300 levers… Apologies.

Maybe, but I haven’t tried.

They are indeed

I would have thought so, as I think the master cylinder and levers are the same part for ABS and non-ABS versions. That said, these levers didn’t fit my bike. I had to drill out the pivot holes to make them fit. (In the video 😉)

@@PeakMotorcycles ok thanks. Stock handles suck so was excited maybe a fix. I’ll give it a watch thanks for all your great work 👊🏻

I'm sorry but I don't know. I don't think I ever remember seeing both listed as bikes for the same levers, so my guess is no. Perhaps your Honda dealer could confirm?

Hi, I've only tried the OEM ones and these ebay specials which I guess fall into the category you don't want... I haven't tried any others I'm afraid.

@@PeakMotorcycles Have you heard of any success from others? I'm not opposed to amazon levers as long as they are quality.

I haven't, but then I guess it's not the first thing that comes up in conversation. I had a quick google, and perhaps something like the AS3 forged levers? www.as3performance.co.uk/products/honda-crf-250-l-2012-2020-rally-2017-2020-forged-front-brake-and-clutch-levers-set-black I haven't tried them myself, but it's a known brand and price wise between the cheap ebay ones and the Zetas.

@@PeakMotorcycles No 300L or rally mentioned on their site. I looked at 250L parts and they don't have levers for it, just the other non street legal 250 models. Plus I am assuming the clutch would need to be drilled would have to be drilled even if they had some. Weird.

Thanks for sharing. I’ll take a look. I put a washer in mine after my first ride out with it. It’s still not perfect, but it’s better than it was.

@@PeakMotorcycles I forgot the size of the washer I used, metric if I recall. Regardless, i do like the feel of these levers much better than stock.

Yes. That’s correct. Did you watch the video?

Yes I did I got it now thanks just put on my full Yoshi exhaust double-take mirrors ...I got to do the DNA filter still tonight and then the flashed 550 performance ecu then should be ready to rip...... still zero miles on her!!!!!!

Oh yeah and I did the 12oclock labs tail light last night