HOW TO HYDRO DIP SIDE SKIRTS | Liquid Concepts

HOW TO HYDRO DIP SIDE SKIRTS | Liquid Concepts | Weekly Tips and Tricks

Рет қаралды 7,351

Күн бұрын

Bryan from Liquid Concepts showing you the best tips and tricks for all your custom coatings including hydrographics, cerakote, custom painting, water dipping, water transfer printing and much more!
In this episode of our weekly tips and tricks video, Bryan teaches us the best way to hydro dip a side skirt, he goes over the best techniques and methods to perform when hydro dipping side skirts.
Film used in the video - www.liquidconcepts.com/shop/p...
Be sure to subscribe and like our page for weekly tips and tricks to help better yourself and the coatings you use!
Check out our Liquid Concepts Distribution Facebook page for more tips and tricks as well as sales and promotions that we run all the time! - / liquidconceptsdist
Be sure to join our Hydrographics 101 Facebook Page to get all the questions answered relating to anything in the hydrographics or custom coatings industry! Tons of professionals and DIY people alike have a great time and learn everyday from questions and answers on this page - / 871687239546498
Visit our website for all your hydrographics needs from film and activator to paints, neons, custom film, training, equipment and much more - www.liquidconcepts.com
HOW TO HYDRO DIP SIDE SKIRTS | Liquid Concepts | Weekly Tips and Tricks

Пікірлер: 30

@kevinl3235 4 жыл бұрын

This was helpful since I will be dipping side skirts in the next few weeks. Looks awesome!

@LiquidConceptsUSA 4 жыл бұрын

Thank you!

@MrShobizz 4 жыл бұрын

Hey that was a very nice clean dip Brian great work as always

@LiquidConceptsUSA 4 жыл бұрын

Thank you!

@user-vc3uq6gt6y 3 жыл бұрын

ขอบคุณกับความรู้ใหม่ๆ

@chatchaiphohongsa7010 2 жыл бұрын

Beautiful Job

@LiquidConceptsUSA 2 жыл бұрын

Thank you!

@mikestromain4387 4 жыл бұрын

Beautiful Job Bryan!!! Last night I did a long hit and it was scary as hell, bit it turned out great. Thanks again for the tips and awesome products!

@LiquidConceptsUSA 4 жыл бұрын

Thanks Mike! Yes those long parts can be a little nerve wracking!

@avus1.8t48 3 жыл бұрын

After you dip on water need to dry or you can dry with a cloth? And also to aply lacquer do you need to prep or pretty much straight forward

@shahroozzarrabi7920 2 жыл бұрын

perfect ! Does it need to have clear top coat to be shiny? does top coat help to have long time satiability of film on parts? Actually I'm asking for OEM parts, which should pass cross cut test and chemical solubility

@LiquidConceptsUSA 2 жыл бұрын

The clear coat is indeed yes what gives it it's glossy finish as well as what protects the dip. Without applying a top coat you risk damaging the dip as the dip itself does not offer any durability.

@alfredomontes6604 3 жыл бұрын

Why you don’t immerse the part in a horizontal way instead vertical?

@LiquidConceptsUSA 3 жыл бұрын

You can technically dip this either way, just we felt it was better when we was dipping it to keep it more at an angle like we dipped it.

@nklkhanna 4 жыл бұрын

Need a lil help. After I dip the piece and when I start rinsing it, the graphic starts to come off from some areas while rinsing. Am just rinsing under the tap with cold water and not too much pressure also. What am I doing wrong?

@LiquidConceptsUSA 4 жыл бұрын

If it is rinsing off it could be a few things. Either one it is over activated or that it is not bonding with your paint due to using the wrong paints or it has cured too much. If you have some photos you can email over I can take a look at it for you. info@liquidconcepts.com

@adamhobbs5779 4 жыл бұрын

What size tip do you use in your activator gun?

@LiquidConceptsUSA 4 жыл бұрын

Hi Adam we use a 1.4 tip on our activator gun.

@nchargeny 3 жыл бұрын

hey bryan, what basecoat did you use for this piece?

@LiquidConceptsUSA 3 жыл бұрын

We use our charcoal metallic as the base color with this realistic carbon fiber film.

@nchargeny 3 жыл бұрын

@@LiquidConceptsUSA thanks

@Couldntellya 3 жыл бұрын

im dipping a mountain bike frame in carbon fiber on flat black and clearing it in matt clear , having issues with taping over sections that i already did so i can get to the other side. anything?

@LiquidConceptsUSA 3 жыл бұрын

It could be tons of things that are going wrong. If you want, shoot us an email with some pictures of the problems that your having and the methods and materials your using and we can try to help you out as much as we can. Our email is info@liquidconcepts.com

@Couldntellya 3 жыл бұрын

@@LiquidConceptsUSA the tank I tried using was about 8in to short for the frame as it was a 50 gallon drum cut in half. Had to dip in muti stages. In between tape jobs the tape would stick to the fresh dip and peel it up.... dip , clear, tape, sand , repeat was the process and it took awhile wow. Looking into a old plastic truck box as my next dip tank. Having a larger tank should solve it.

@LiquidConceptsUSA 3 жыл бұрын

@@Couldntellya Yes you certainly want to make sure you have plenty of tank for the item that you are dipping!

@elifuenmayor8359 4 жыл бұрын

How did you prep the side skirt before dipping it?

@LiquidConceptsUSA 4 жыл бұрын

We sanded them down smooth, primer, paint, dip, touch up, clear coat.

@elifuenmayor8359 4 жыл бұрын

@@LiquidConceptsUSA awesome thanks for the quick response, do you guys have a video of the prepping process I can use as a guide?

@rs8930 4 жыл бұрын

I was wondering why it is so expensive to dip Wheels. It's not a hard labor process to go through The powder coat my wheels is $65 a wheel and you guys want a hundred fifty plus dollars to dip a wheel that is a little bit pricey. I think especially when it only cost 13 bucks for 1 M of the stuff

@LiquidConceptsUSA 4 жыл бұрын

Hi you cannot really compare powder coating and hydrodipping. In most cases it is definitely easier to powder coat versus hydrodipping. With hydrodipping there is more prep and time involved. You have to blast, primer, paint, dip the wheel, and then clear. In most cases depending on the wheel it might require a re-dip, touch-ups etc. The film is the cheapest part of the entire process.