How To: Infiniti G35 Radiator Replacement

Рет қаралды 5,482

Жыл бұрын

Here's an overview of a radiator swap on my G. With the plastic ends coupled to the aluminum center, the stock radiators are prone to cracking. The whole process took about two hours and $150 in materials. A simple DIY if you're willing to DoWitt!
Helpful Links:
Ramps: amzn.to/3UxGrSG (Amazon)
Radiator: amzn.to/48h2kIY (Amazon)
Coolant: amzn.to/3HZXXaO (Amazon)

Пікірлер: 27

@scottw5082 4 ай бұрын

Excellent video. I replaced mine yesterday. You saved me lots of time. Your car looks to be in great shape. Mine has 245k but starting to look a little rough. Still runs good though. Subscribed! Keep up the good work!

@DoWittGarage 4 ай бұрын

Fantastic! Thank you! I’m glad it helped. They’re great cars, and I’m hoping to take mine to 300k+ miles.

@robertogarnica Ай бұрын

Bro I need help bro

@nah4749 Жыл бұрын

This was a great video very much thumbs up, and very informative thank you for sharing.

@DoWittGarage Жыл бұрын

You’re welcome. Thanks for watching!

@synaptik111 9 ай бұрын

Thanks for this excellent video! I'm about to upgrade the radiator on my '06 G35 6MT coupe that's got about 140k miles on it and this'll be very helpful

@DoWittGarage 9 ай бұрын

You're welcome. Good luck with your swap. Thanks for watching DWG!

@Nomnom4kirby 10 ай бұрын

i recently had a shop quote me $1,093 for parts and labor for this

@DoWittGarage 10 ай бұрын

This is exactly why I started my channel. Shop prices are outrageous. The parts for the replacement are only in the $200 range and a couple hours of your time. Thanks for tuning in to DWG!

@vqdriver 4 ай бұрын

Found your video among others for this job. Thank you! I bought a Denso radiator from Amazon for my 6sp coupe. I also bought OEM upper and lower hoses, clamps and thermostat from Z1. The radiator is 97% in it’s just missing the lower posts by a few mm. Ran out of time this afternoon but will attempt again next free chance I get. There’s good hand space it’s just the feet or posts are sorta tough. Maybe it’s the Denso radiator but the AC condenser sat on their posts perfectly… I’m hoping there’s no difference between automatic and manual radiators…

@DoWittGarage 4 ай бұрын

Awesome, I hope it helped you! The main difference between the auto and manual radiators is the automatic has a transmission cooler integrated. I don’t believe the manual ones have that. As long as the one you bought is the same as the one you took out, you should be home free. Thanks for watching 🤙🏻

@PhilipCurrier1 2 ай бұрын

can you send the link to the manual g35 radiator ? also does it matter that i have an 04 sedan 6 speed manual compared to your coupe?

@vqdriver 2 ай бұрын

@@PhilipCurrier1 it doesn’t matter if you have a manual. I bought the “automatic” Denso radiator on Amazon and you simply do not use the lower ports that cool ATF. They remain plugged. The Denso fit inch perfect! Just angle it correctly and take your time. You’ll see what I mean

@PhilipCurrier1 2 ай бұрын

@@vqdriver so will the stuff i dont use be attached and will just hang there or will they be able to be taken out and discarded

@vqdriver 2 ай бұрын

@@PhilipCurrier1 they are simply little tiny outlet flanges. I left the little rubber nipples on. They will probably fall off during driving but doood I’m telling you the Denso radiator fits perfectly and is built really well for what you pay. Just use ittttt lolz insane bruh…

@RfAlSiTpA Жыл бұрын

I have an 03 coupe AT and cannot find how to refill the trans fluid...am I missing something?

@DoWittGarage Жыл бұрын

I am unfamiliar with the coupes as mine is a sedan. Assuming our transmissions are the same, there is a filler tube behind the engine that is accessible from the engine compartment. It has a 10mm bolt on top - not your typical transmission filler. Undo the bolt and you will have a standard dipstick. Be sure to check with the car warm and running in neutral for your best measurement.

@duesa2203 25 күн бұрын

I know this is dumb but where did you get your radiator from, I’ve been looking at RockAuto but just wanna do more research and not get a bad brand that made these.

@DoWittGarage 25 күн бұрын

Not dumb at all. I got mine through Amazon, and it appeared about the same quality as the OEM that I took out. I figure if the original lasted over 200k miles, I’m okay with that.

@robertogarnica Ай бұрын

Bro I need help bro

@curtisrenaud2311 11 ай бұрын

I was hoping to see you add tranny fluid so I'd know exactly where the filler tube is but the video was still great. Thanks

@DoWittGarage 11 ай бұрын

So little tranny fluid came out that it was still up to level and I didn’t have to add any. You aren’t the first to ask where the filler tube is. I may make a follow up video on a transmission drain/fill for that purpose. It is under the hood between the engine and the firewall. You have to remove a 10mm bolt and then the dipstick comes out. Thanks for tuning in to DWG!

@PhilipCurrier1 2 ай бұрын

@@DoWittGaragedoes it matter if it gets air in the hoses?

@robertogarnica Ай бұрын

@@DoWittGarage Brother I cracked mine and a lot of transmission oil came out. I’m about to buy the radiator tomorrow and I need to know where I put more transmission fluid

@DoWittGarage Ай бұрын

@@PhilipCurrier1it shouldn’t, as long as you make sure it’s filled to the correct level.

@DoWittGarage Ай бұрын

@@robertogarnicathe fill for the transmission is behind the engine. If you’d like to see exactly where, check out my follow up video “transmission drain/fill”