Nissan 350Z Radiator Removal, Installation and Bleeding Coolant System (In-depth) | AnthonyJ350
Рет қаралды 30,930
Күн бұрынWe do an in-depth step by step video for people that want to install a performance all aluminium radiator into their 350Z or G35. In this video we work with Mishimoto's high performance all aluminium rad and their slim cooling fans to make sure we get proper clearance under the hood and maximum performance to keep our engine cool. I highly recommend installing a Mishimoto or Koyo radiator into these cars.
#Mishimoto #Radiator #CoolingSystem #Coolant
Music by: LED Monster "Come Alive" (Instrumental version)
Subscribe for more automative tips!: bit.ly/sub2anthonyJ350
Watch my most popular uploads!: bit.ly/anthonyJ350howto
Check out my Amazon storefront www.amazon.com/shop/anthonyj350
Website: gofasthavefun.ca
Instagram: / anthonyj350
Twitter: / anthonyj350
Facebook: / aj350
Shop: www.amazon.com/shop/anthonyj350
E-Mail: info@gofasthavefun.ca
T-Shirt: teespring.com/en-GB/AnthonyJ3...
Music available - www.jinglepunks.com & www.epidemicsound.com
Intro - "Heartbreaker'" - Gloria Tells
Outro - "I just can't change my Emotions" - Basixx
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
Nissan 350Z Radiator Removal, Installation and Bleeding Coolant System (In-depth) | AnthonyJ350
• Nissan 350Z Radiator R...
ANTHONYJ350
/ anthonyj350
Radiator Swap: (0:00)
PREP: (0:30)
Safety: (2:20)
Removal: (3:02)
Installation: (11:05)
Refill & Bleed system: (24:19)
Conclusion: (33:00)
@eazyboy3000 4 жыл бұрын
Great timing for this video i have these same fans coming in today
@AnthonyJ350 4 жыл бұрын
Hope it helps!
@roned9189 4 жыл бұрын
Superb rad installation will do this soon
@AnthonyJ350 4 жыл бұрын
Thanks Ron!
@white310 2 ай бұрын
Ive been following you for years now it seems. My 350z's radiator cracked at the top. So i got a new one and new hoses as well to go along with. This is going to help my friend and I out greatly this coming weekend!
@AnthonyJ350 2 ай бұрын
Let us know how it goes!
@ketobeast8489 4 жыл бұрын
Just did mine a few weeks ago. Look into getting a coolant breather tank or swirl pot. It constantly bleeds your system as you drive especially handy if you drift, race or drive aggressively on windy roads. Nice work bro.
@AnthonyJ350 4 жыл бұрын
That's a great idea! Thanks for sharing!
@JoseGutierrez-gf1hv 3 жыл бұрын
Nice job 👏🏻👏🏻
@AnthonyJ350 3 жыл бұрын
Thank you!
@Comp1337Loser Жыл бұрын
Thanks man! Me and my dad got to the part of the install where you drop the radiator in and its supposed to sit flush with the AC condenser and sure enough it wouldn't fit because the bottom metal tabs on the radiator were slightly bent up, so I'm glad I found your video.
@AnthonyJ350 Жыл бұрын
Ya there's a bit of finessing to get it in, but with a little patience it goes together nicely. Now you get to bleed it lol.
@Comp1337Loser Жыл бұрын
@@AnthonyJ350 Yeah, it kept over heating til I put like half a gallon more after the radiator appeared full without running it. -_-
@AnthonyJ350 Жыл бұрын
@@Comp1337Loser Do you have the funnel like in the video?
@Comp1337Loser Жыл бұрын
@@AnthonyJ350 Yep! Took about another half gallon once the thermostat opened up with the funnel attached. *glug,glug,glug* Next upgrade is brake pads, rotors, and steel braided lines if Z1 ever gets the rotors in stock (I ordered them 5 months ago in May😑)
@JB-he6ek 3 ай бұрын
Video helped out a lot! Thanks man! Just installed all three items in my sons 2004 350Z. I have it loose still and havent hooked up hoses either as the rubber boots on factory were dry rotted. So waiting on new ones to arrive any day now. Hopefully I can push up on it and install boots without taking it all out. I followed to the T and as long as I dont have to take out for the rubber feet I did it in one try thanks to your video!
@AnthonyJ350 3 ай бұрын
That's so awesome to hear the video helped you! How is the car running?
@JB-he6ek 3 ай бұрын
Well I'm actually waiting for the boots bc the originals were dry rotted and waiting on the overflow reservoir. Should be here any day now. Should be running in a few days will update
@Ace69q8 3 жыл бұрын
I run the same setup on my 350z, works great but the heat here in Kuwait goes 50c+ I opted for the race fans from mishimoto. They are a bit louder but the car runs cooler. Definitely worth it.
@AnthonyJ350 3 жыл бұрын
Thanks for sharing. I would also recommend an oil cooler from Mishimoto to let the oil also help heat exchange kzfaq.info/get/bejne/o6iljLyGrLbJmYE.html
@Ace69q8 3 жыл бұрын
@@AnthonyJ350 definitely on my list!
@BoOmBaMan 4 жыл бұрын
That's pretty cool. I would do something very similar to fasten lines and wires. That condenser is a bit tricky since the tabs have to be aligned just right and getting it to pinch down takes some effort. Nice video 😎
@AnthonyJ350 4 жыл бұрын
Thanks Thizz!
@stealthg35infiniti94 4 жыл бұрын
Looks like a good quality unit...I would only consider it if I was in Auto Cross or road racing...After 15 years my stock radiator still works fine ,although just recently changed the fans with shroud...Tip: also put your heater to maximum to open flow to heater core at drain/fill... fill your radiator until the rear bleeder shows coolant, then close...squeeze upper hose to burp,then top off and cap... Fill your stock overflow tank with the correct mixture up to 1/2 inch from the bottom of the neck...Drive your car normally...After 5 heat/cool cycles ,the coolant will be exactly on MAX line of the reservoir....
@AnthonyJ350 4 жыл бұрын
Ya it definitely looks nice. Great tips, thank you for sharing!
@Ragnarok1881 3 жыл бұрын
Did anyone's fan shrouds feel flimsy when you first unbox them? I took mine out and you can see and hear flapping. Thanks for the video. It really helped.
@AnthonyJ350 3 жыл бұрын
Should feel solid once you mount it to the car.
@patrickkillilea5225 Жыл бұрын
Nice!
@AnthonyJ350 Жыл бұрын
Thanks for watching!
@stealthg35infiniti94 9 ай бұрын
Excellent tutorial. My original radiator after 18 years is now having a leak. I will be going with Mitshimoto also. Although, I've never experienced any overheating issues with OEM even during our hot Florida summers. The one exception was during the original fan failing. My fans were replaced just a few years ago so I'll keep them. I like seeing my coolant resovior level so I won't paint mine black.😂 How dirty was your condenser? Any difference in AC Performance?
@AnthonyJ350 9 ай бұрын
Thanks for the comment
@dragontiger6923 3 жыл бұрын
🔥🔥🔥🔥
@AnthonyJ350 3 жыл бұрын
Thanks for watching!
@iconicstance2994 7 ай бұрын
Very clean install, helped me a lot. I've installed the same along with new pulleys/belt, AC delete and new silicone pipes all round. Did you face any issues with it in the future?
@AnthonyJ350 7 ай бұрын
No, no issues. I just change the coolant regularly to keep it fresh. I prefer using Nissan coolant and mixing it with water.
@iconicstance2994 7 ай бұрын
@@AnthonyJ350Awesome man, thank you
@AnthonyJ350 7 ай бұрын
@@iconicstance2994 You're welcome 🙂
@bryanandrade2320 7 ай бұрын
Can you still install the mishimoto fans with a non mishimoto aftermarket aluminum radiator??? Thanks for the step by step process 🤝
@AnthonyJ350 7 ай бұрын
I'm not sure on that one. I haven't seen it done personally. If another brand let's you use the OEM fans, just use those.
@bryanandrade2320 7 ай бұрын
@@AnthonyJ350 thank you for your insight I’ll still buy the fans and try them on with my aftermarket radiator,my radiator fans are still working fine and no overheating issues but I don’t like how they sound these aftermarket fans sound better to me personally
@kouvue1010 3 жыл бұрын
Hey Anthony, how's the fan holding up? I did some research and found a couple of people saying that the Mishimoto fans overheats, thus oem fans are better, I bought some Mishimoto fans already but hesitant to install, summer where I'm at reaches 115 the highest and barely 30's in the winter, my z is usually only my weekend/spirited driving car. what do you suggest?
@AnthonyJ350 3 жыл бұрын
Did you get the Mishimoto radiator? With those outside temperatures you should also run their oil cooler.
@kouvue1010 3 жыл бұрын
@@AnthonyJ350 yes, I have the mishimoto radiator, fan and thermostat oil cooler, but have not yet installed. You still recommend running the mishimoto fan and run oil cooler?
@AnthonyJ350 3 жыл бұрын
@@kouvue1010 Ya I do. I had to test my car and let it idle through 8 cooling fan cycles, needle never moved on the gauge. Just make sure you do a proper bleeding procedure and use oem coolant and mix it to the ratio you need with distilled water.
@kouvue1010 3 жыл бұрын
@@AnthonyJ350 thanks brother, I appreciate you and your detailed videos. Keep doing what you do!
@AnthonyJ350 3 жыл бұрын
@@kouvue1010 Thanks for watching!
@stealthg35infiniti94 9 ай бұрын
BEWARE: The G35 Mitshimoto radiator may not fit your G35. The Upper &Lower alignment pegs were not the same as OEM, thus would not fit. Spoke with Mitshimoto and their measurements are like those with the received unit. Top is 685mm, should be 678mm. Bottom is 652mm, should be 658mm. My theory is Mitshimoto must have taken an early G35 as their template and assumed all 03 to 07 were the same. Measure your pegs distance before ordering!
@AnthonyJ350 9 ай бұрын
Thanks for the comment
@lightyagami3879 2 жыл бұрын
My 07 HR z with mishimoto came without overflow when I bought it
@AnthonyJ350 2 жыл бұрын
Should put it back in
@lightyagami3879 2 жыл бұрын
@@AnthonyJ350 definetly will idk why it’s like that lmao 🤣
@goatfunker7762 3 жыл бұрын
so im about to do this how tight will it really be with stick fans? I dont wanna spend extra cash right now.
@AnthonyJ350 3 жыл бұрын
Pretty tight considering in the video my slim fans just fit. I would just save the money by the fans and do the job once.
@goatfunker7762 3 жыл бұрын
@@AnthonyJ350 Shit eh its that bad, i went to the shop to get my thermostat done and they are now telling me my rad is clogged because the bottom rad hose is staying cold. Do you thin i need it or should i to and bleed it again. 2003 350z with 50000km
@PGYT_OFFICIAL 2 ай бұрын
Do you need to use the mishimoto fans, as mine is only the radiator
@AnthonyJ350 2 ай бұрын
They have the best fit
@dakimakura1702 2 жыл бұрын
My car is pretty stock, but I do want to replace my radiator. Would you recommend the Mishimoto to a stock 350z?
@AnthonyJ350 2 жыл бұрын
For sure with the slim fans as well. Durability mods are always good if they're engineered well.
@dakimakura1702 2 жыл бұрын
@@AnthonyJ350 Awesome, thank you! I'll go for it then ^^
@onlykhai1914 8 ай бұрын
@AnthonyJ350z I have been trying to figure out why my radiator isn’t sitting evenly and is loose on the passenger side. However, on the driver side, the radiator sits tight so I’m just thinking you would be because of the thing that you mentioned on this part of the video 8:56. Thank you!
@AnthonyJ350 8 ай бұрын
Are the bottom "feet" of the radiator going into their spots completely?
@onlykhai1914 7 ай бұрын
@@AnthonyJ350 I’m not sure, I bought the car from the previous owner like that so I’m not sure. But the radiator is putting pressure against my cold air intake
@AnthonyJ350 7 ай бұрын
@@onlykhai1914 Gotta look from underneath
@TheVIP30 3 жыл бұрын
Will there be any issues if i connect the fans connectors vice versa?
@AnthonyJ350 3 жыл бұрын
I don't think so, they both seem to turn on at the same time and speed.
@anntmobin Жыл бұрын
What’s the link to the fan setup from mishimoto? Thanks I’m advance.
@AnthonyJ350 Жыл бұрын
I would just search on the Mishimoto website.
@steeledavies6509 3 жыл бұрын
does walmart have one of those funnel cap things. i need one haha
@AnthonyJ350 3 жыл бұрын
Not sure, did you try looking in the automotive department?
@JoseGutierrez-gf1hv 3 жыл бұрын
Where can I buy hose clamps? it is a very good idea !!!
@AnthonyJ350 3 жыл бұрын
Your local auto parts store should have them.
@JoseGutierrez-gf1hv 3 жыл бұрын
@@AnthonyJ350 ok thanks 🙏
@DzDaBeaStt 3 жыл бұрын
Should both fans turn on doing the diagnostic mode I did it and only the driver side fan is turning on
@AnthonyJ350 3 жыл бұрын
Doesn't seem right. Try idling the vehicle and turn on the air conditioning, see if both fan kick on.
@DzDaBeaStt 3 жыл бұрын
@@AnthonyJ350 is that safe haven’t added coolant in the car yet
@AnthonyJ350 3 жыл бұрын
@@DzDaBeaStt Add coolant first. Here's the bleeding procedure kzfaq.info/get/bejne/q72pntd2xpavYJc.html
@JoseGutierrez-gf1hv 3 жыл бұрын
Hi, they already did the installation of the radiator and the fan mishimoto the workshop told me that the fan mishimoto gives a problem when you want to use the ac they say that it does not get to infriate well how true is that ?
@AnthonyJ350 3 жыл бұрын
What's infriate?
@JoseGutierrez-gf1hv 3 жыл бұрын
@@AnthonyJ350 affects the ac!
@AnthonyJ350 3 жыл бұрын
@@JoseGutierrez-gf1hv Not sure how, they flow air fine. Did they say anything specific?
@DragoMusivini Ай бұрын
I have an HR with an automatic transmission and the oem radiator for my car has the transmission cooler built in. I understand I would have to get an external transmission cooler in order to solve the issue. Did you install one or is the manual different in certain aspects from the automatic.
@AnthonyJ350 Ай бұрын
Manual transmissions don't have a cooler from factory. They don't really need it.
@DragoMusivini Ай бұрын
@@AnthonyJ350 But the automatic ones do need it. So is there any electrical wiring that has to be done for the external transmission cooler and also where did you tuck your lines and how did you pipe them
@AnthonyJ350 Ай бұрын
@@DragoMusivini Which lines are you referring to? I show everything in the video of what I did.
@DragoMusivini Ай бұрын
@@AnthonyJ350 I was referring to an external transmission cooler. I have an automatic and the transmission cooler comes built into the oem radiator.....as weird as that is. So if I wanted a Mishimoto Radiator and fan set up at the same time I would have to buy an external transmission cooler set up because Mishimoto radiators do not come with one. So when you were under the car I saw some thick steel braided lines at 3:10 what are they?
@AnthonyJ350 Ай бұрын
@@DragoMusivini OH those are for my oil cooler kzfaq.info/get/bejne/o6iljLyGrLbJmYE.htmlsi=so5vI3aSyEPjfA36
@stevehawkings1696 3 жыл бұрын
Will the fans fit an 07 Mishimoto radiator? I’m about to order one but one person said they would and another said they wouldn’t.
@AnthonyJ350 3 жыл бұрын
No idea on that one. There's no fans listed for your year?
@stevehawkings1696 3 жыл бұрын
@@AnthonyJ350 not for slim fans 😩 I’m trying to make my Z sound like a gaming computer if I can lmao
@AnthonyJ350 3 жыл бұрын
@@stevehawkings1696 You'll probably have to fabricate your own mounts. Is it the factory radiator?
@stevehawkings1696 3 жыл бұрын
@@AnthonyJ350 I’m about to replace mine with a Mishimoto I just figure getting slim fans would make it easier to fit but from what I’ve seen I shouldn’t really have an issue with the stock fans.
@varnox1250 10 ай бұрын
Hi. How much coolant did you use in total?
@AnthonyJ350 10 ай бұрын
You only need 1 jug when mixing with water.
@littlez3325 2 жыл бұрын
What about the automatic transmission Zs what works for them?
@AnthonyJ350 2 жыл бұрын
I would contact Mishimoto to see what solution is available.
@jerelmiller3963 6 ай бұрын
Will that slim fan work on the hr ?
@AnthonyJ350 6 ай бұрын
Not sure, check Mishimoto for what years they list.
@anonymousb.r.3933 8 ай бұрын
Is the self diagnostic mode required
@AnthonyJ350 8 ай бұрын
No, it's just to check operation
@smalldog221 Жыл бұрын
where do I get that funnel with the cap that fits the Z???
@AnthonyJ350 Жыл бұрын
It's a universal kit. Your local auto parts store will have it.
@johnle1711 3 жыл бұрын
Those are valves? Some people think they are drain plugs. I loosened mine, and now it can’t be tightened.
@AnthonyJ350 3 жыл бұрын
Which part in the video?
@johnle1711 3 жыл бұрын
@@AnthonyJ350 the bottom part of the radiator with the aluminum bolt that looks like it can be unscrewed. I think you called it a valve?
@johnle1711 3 жыл бұрын
Is that not a drain plug?
@AnthonyJ350 3 жыл бұрын
@@johnle1711 It's referred to as a petcock valve. It's basically a drain plug. They're plastic, as they get old they can break because they're typically plastic.
@johnle1711 3 жыл бұрын
@@AnthonyJ350 I tried unscrewing it to drain my coolant. It came half way off, then I tried to screw it back in, and now it keeps spinning like it broke, but I don’t feel like anything snapped. It feels like over tightening a screw and it keeps turning except the peacock valve is not fully flush, so it might leak.
@raylujan5409 4 жыл бұрын
Anybody know why they don’t make the fans for the 07 and up??
@AnthonyJ350 4 жыл бұрын
I would e-mail them to see if they have a solution.
@lightyagami3879 2 жыл бұрын
What overflow did you use?
@AnthonyJ350 2 жыл бұрын
The stock one
@mohammedosman1008 Жыл бұрын
Is it just one time to remove the bleeder valve screw?(first time)
@AnthonyJ350 Жыл бұрын
You can do it once at the beginning. Then at the end when it has cooled down give it a little crack to let any other air out.
@mohammedosman1008 Жыл бұрын
Im just doing it rn when I put water in the cone I removed the bleeder, water did not come out when I squeezed the upper hose its started coming out
@mohammedosman1008 Жыл бұрын
I rev it couple times its not giving hot air but temperature looks good
@1112223333111 4 жыл бұрын
what year is your z? thanks
@AnthonyJ350 4 жыл бұрын
2006 Enthusiast
@slide50t 2 жыл бұрын
hello how are you? i wanted to ask, where /what type of transmission oil cooler is on your vehicle? I just purchased this radiator x-line series and mishimoto told me i needed separate transmission cooler.
@AnthonyJ350 2 жыл бұрын
I have a Mishimoto oil cooler on the front. Don't have a transmission cooler cause it's a manual transmission.
@slide50t 2 жыл бұрын
@@AnthonyJ350 Hi ....oh okay! I was wondering.....lol. thanks for responding. Btw, the aftermarket running lights/turn signal lights where did you get the installation instructions? Thank you
@AnthonyJ350 2 жыл бұрын
@@slide50t Here's the video on them kzfaq.info/get/bejne/bN2ClqyAspi8m4U.html
@slide50t 2 жыл бұрын
Thanks for the install information. I have a 2004 350z Touring and I have the M-Spec CAI racing from Z1 and the Z1 high flow cats and the Invidia Gemini Catback exhaust. I was viewing your header installation and wanted to ask, could you tell a difference in torque n horsepower after the header installation? I was thinking of purchasing the Tomei V2 headers but I wasn't sure if it would be worth it. Any thoughts etc.....? Thank u
@AnthonyJ350 2 жыл бұрын
@@slide50t I haven't driven the car hard yet. Still doing some wiring. I will say it revs a lot easier and smoother. In theory the midrange power and throttle response will be much better.
@pnoisoldia 2 жыл бұрын
Where did you route the transmission oil line? Did you have to get a separate cooler for it?
@AnthonyJ350 2 жыл бұрын
Don't have a transmission oil line in this application, it's a 6 speed manual.
@emmettdoliveiro4327 3 жыл бұрын
how do you do self diagnostic
@AnthonyJ350 3 жыл бұрын
Here's the procedure kzfaq.info/get/bejne/fa-Yjct0utPJoIU.html
@1112223333111 4 жыл бұрын
1:35 nylocks
@AnthonyJ350 4 жыл бұрын
Yup that's another way to secure them.
Poly Holy Yow Spanish
Рет қаралды 27 МЛН
AnthonyJ350
Рет қаралды 66 М.
Alex, The Car Doctor
Рет қаралды 530 М.
AnthonyJ350
Рет қаралды 128 М.
niftynetwork
Рет қаралды 9 М.
Motordyne G35
Рет қаралды 492 М.
CRT Production
Рет қаралды 8 МЛН
MotoRaido
Рет қаралды 1,4 МЛН
Авто Док, Шатура
Рет қаралды 714 М.