How To Install 1" Lo Pro Lift Kit | 14" Wheels Low Pros | $100 Club Car Precedent Project Golf Cart

No video

How To Install 1" Lo Pro Lift Kit | 14" Wheels Low Pros | $100 Club Car Precedent Project Golf Cart

Рет қаралды 28,601

Күн бұрын

#golfcart #project #clubcar
More Videos On Amazon - www.amazon.com...
The $100 Golf Cart got some NEW SHOES on it! We also painted a bunch of old parts and Added new parts listed below to get this old cart looking FRESH again! The 1" Lift kit will help with clearance issues once the body is installed!
Visit golfcartstuff.com
Save money with this link - golfcartstuff.com/fentertainment23
or coupon code "fentertainment23"
Minimum $75 order
Follow GolfCartStuff on Facebook @ / golfcartstuff
Follow GolfCartStuff on KZfaq @
/ @golfcartstuff
Front Precedent Shocks - amzn.to/3opkXG5
Front Precedent Bushing kit - amzn.to/3cxCvgw
Precedent Hubs - amzn.to/3zmd7n1
Precedent Steering Rack - amzn.to/3crIx2n
Precedent Tie Rod Ends - amzn.to/3cwpJz5
*Disclaimer: This video description contains affiliate links. That means that I am awarded a small commission for purchases made through them, at no added cost for you.

Пікірлер: 36

@tombrown8428 10 ай бұрын

There reason Golf Cart Stuff gave you a good deal is because your content is great and it really helps people. I am moving to the The Villages in January and will need to get a good cart after I move.

@brendanstar7493 2 жыл бұрын

This golf cart is already looking good I can’t wait to see what it looks like when it’s done!

@hoddem 2 жыл бұрын

Looks good, I just did a restore on a 2007 ezgo txt pds. Took it down to the frame and repainted everything from the ground up. Built my own lithium 36v 200ah battery. I also chose to go with 14” wheels, low pro tires and no lift. I will have kids on it so I didn’t want the risk of a tippy lifted cart, especially with the lighter lithium batter. Love the videos, keep them coming!

@fatleo Жыл бұрын

I remember when you had 500 subs man good to see you grew huge! The old ozark tumbler videos were awesome

@Fentertainment Жыл бұрын

Man. You making me feel old now! Still growing slowly but growing. Did you just take a strol back to the channel or were you looking something up?

@kevcgrsmkr9mm 2 жыл бұрын

Love your channel. The content is very helpful. I’m starting a 2008 Precedent upgrade. Thanks!

@Fentertainment 2 жыл бұрын

Sounds fun! Big plans

@thecarolinahoosier3596 2 жыл бұрын

Can't believe how clean that frame is. Did you bead blast it? Another great video!

@thecarolinahoosier3596 2 жыл бұрын

Never mind - I missed your video showing how to clean aluminum. All caught up now!

@toddc.4749 Жыл бұрын

Great video, made that look easy. I am in the middle of taking 6” lift off a precedent. The front change of spindles didn’t take maybe 20 minutes, but the rear ugh. I attached the axle to the heavy duty leaf springs and can’t get the leaf spring ends lined up to bolt. I tried attaching the leaf springs first then attach the axle to them but couldn’t get the nut to line up with the hole. Just curious if there is trick to the order? Or any suggestions from your experience? Any help is appreciated.

@SteveMooreConstruction 2 жыл бұрын

Great video ! You should try getting a insulated garage door to go with your spray foam. Thanks for the videos !!

@Fentertainment 2 жыл бұрын

Steve you are exactly right! I do need to do that!

@03treefitty 2 жыл бұрын

Love all the content i have a slightly cheaper version of a lot of what you have done. 2017 Yamaha drive 2 style of it. I definitely need to take everything apart and clean up and paint stuff as i have cheaply added most with stuff i have laying around over the 2 years of ownership.

@Fentertainment 2 жыл бұрын

I'd still like to find a yamaha dc cart!

@dudge2010 9 ай бұрын

Love your videos I have a club car president set up just like your wife’s cart. 1 inch spacer in the front and four leaf heavy duty leaf springs in the rear. My question is do you run shocks or no shocks heard it both ways. What is your preference? Thanks, Ray.

@Dumpedvw6719 2 жыл бұрын

Caint wait to see it done!!

@Fentertainment 2 жыл бұрын

You and me both!

@johnedwards145 8 ай бұрын

What part of South Carolina are you from Im From ABBEVILLE

@Louisianawhips 5 ай бұрын

what’s the name of these wheels?

@RBallarddesigns 2 жыл бұрын

You should grab the small lift table from Harbor Freight. Lifts 36” and 500lbs. Would make doing stuff like the rear much easier on your back. Fun build man. Keep at it

@Fentertainment 2 жыл бұрын

Ive been thinking of getting one of the extended versions or a high rise pallet jack.

@RBallarddesigns 2 жыл бұрын

@@Fentertainment I love my little table. Use it much more than I thought I would. Definitely worth it

@Fentertainment 2 жыл бұрын

@@RBallarddesigns Do you have the hobofreight brand? Does the table reach both sides of the cart?

@RBallarddesigns 2 жыл бұрын

@@Fentertainment yes the HF brand. Won’t reach with the handle on. Might with it off

@Fentertainment 2 жыл бұрын

@@RBallarddesigns Thats good to know. I might look into one then. Will it raise your ev as well?

@coasttal123 2 жыл бұрын

Yep, the summer of rain. 90 miles south of you.

@texak1974 Жыл бұрын

What kind of lube did you spray on the bushings during installation?

@Fentertainment Жыл бұрын

That was PB Blaster, But I also use WD40 sometimes.

@fogdogrides 2 жыл бұрын

Hey mr fentertainment have you attempt to do a Jake hydraulic brakes Kit. I’m in the process of doing it right now

@Fentertainment 2 жыл бұрын

Not yet. I did the manual disc brake conversion and didnt care for it.

@fogdogrides 2 жыл бұрын

@@Fentertainment it’s pretty cool the only problem I have with it is the caliper is not working so the company is sending me a replacement. if you decide to go that route let me know I got some pointers I can share with you and keep up the good work my friend really enjoy your work I pretty much did everything you did to your golf cart on my Yamaha

@nakemiakirksey5753 2 жыл бұрын

What happened to the silver fox build???

@Fentertainment 2 жыл бұрын

Silverfox? I installed a silverwolf motor in a cart but that wasnt a build. I still have it. Might go in this cart not sure yet.

@nakemiakirksey5753 2 жыл бұрын

I would love to see that. I liked the speed and torque it had. I was thinking of putting it in my cart, but I was waiting on you to do an update! Thanks and I love this channel. Keep up the great work