How to Install 3.5 Inch LCD on Raspberry Pi - Super Easy Way (In 3 Minutes)

Рет қаралды 620,229

Күн бұрын

Let's see how to install any 3.5 Inch LCD screen on Raspberry pi in just few minuets , i am sharing the super easy way to install the touch screen on pi. The LCD i am using in this tutorial is "Geekcreit 3.5 Inch 320 X 480 TFT LCD Display" i got this LCD from banggood.com.
Buy 5 Inch LCD Display here: fas.st/uSNK7L
This is a GPIO based LCD screen for pi which is easy to be install , all you have to do just plug the screen to the GPIO pins and power up your pi. Then you will find your lcd is nit working , there is only white screen. To fix the white screen problem you have to connect your HDMI monitor to pi and you have to put some codes in the terminal.
▶▶ LCD Installation Code: trickiknow.com/raspberry-pi-3...
After installing the LCD you will not be able to get the display on the monitor , in my video i am also showing how to get display back to the monitor from LCD.
▶▶ 7 Inch touch screen LCD for Pi: • Cheap 7 inch Touchscre...
▶▶ 5 inch HDMI LCD on Raspberry pi 4: • How to Install 5 inch ...
▶▶ 11.6 Inch touchscreen Raspberry Pi 3 display: • Raspberry Pi portable ...
▶▶ New Raspberry Pi 4 review for starters: • Raspberry Pi 4 - How t...
▶▶ Raspberry Pi 3 Tutorial for Beginners: • Raspberry Pi 3 Tutoria...
🎤 Audio in this video is recorded with Rode NT-USB
▶▶ Watch Video : • RODE NT-USB: How to Se...
Hope you like to learn the installation process , thanks for watching my video guys. If you have any questions please ask in the comment section and if you are new to my channel please subscribe my channel for more tech tips.
▶▶ If you Like my video plz SUBSCRIBE : bit.ly/SubscribeTrickiKnow ❤
DISCLAIMER: This video's description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission and you lose nothing. This help support the channel and allows us to continue to make videos like this. Thank you for the support!!

Пікірлер: 823

@TrickiKnow 6 жыл бұрын

*IMPORTANT:* The Success ratio of this method is 90% , few LCD are not working. Please Please Please make sure to *backup* your important files or do this experiment in a fresh memory card. If you have any *questions* please ask below , Check out New *Raspberry Pi 3 Tutorial* for Beginners: kzfaq.info/get/bejne/ZpZoZ8WLy7erY58.html 😍

@jayhayes7162 6 жыл бұрын

TricK i Know what if I use the retropie operating system???

@luizhenriquemarinho4176 5 жыл бұрын

something went wrong when i restarted raspberry pi, the screem stills write and i cant code, when i plug off the source and plug in it stills write, What shold i do?

@Theguywith2thumbs 5 жыл бұрын

What if I just simply want to use it as a hdmi screen?

@Theguywith2thumbs 5 жыл бұрын

Like for my ps tv

@Theguywith2thumbs 5 жыл бұрын

Or other gaming consuls

@jessek8955 6 жыл бұрын

I would like to personally thank you for making this process as simple and as easy as it could possibly get!!!! YOU ARE SIMPLY AWESOME FOR MAKING THIS VID!!!!!!!! I cannot thank you enough!!!!!!!

@TrickiKnow 6 жыл бұрын

You are most welcome to my channel , have a wonderful day 😀

@abhijeetpatil570 5 жыл бұрын

Yessss!!! I can work with my R-Pi-3 B+ with 3.5" LCD with touch functionality. Thank you so much... For being so clear and to the point to get this working...

@robb961969 3 жыл бұрын

I've been trying to get this going all night, and this is the first guide that actually works. Thanks!

@jamespolland958 6 жыл бұрын

OMG! I'm completely new to this, but you just did in minutes what i've been trying to do for hours! Thank you!!!

@TrickiKnow 6 жыл бұрын

I understand your feelings, for the first time I was just like you 😀

@wipalo.the.artist 4 жыл бұрын

Thank you for this! I spent an entire evening fighting with the screen, you solved it in 4min!

@MikeTheMic 4 жыл бұрын

What a painless process. Works fantastic first time with no issues! Thanks

@ArthurDent0042 4 жыл бұрын

Clear, concise, and helpful instruction. Well done. Thanks!

@fabriziofioralli354 4 жыл бұрын

Just installed in my RPI4 without problems. Really simple. I was afraid to loose the VNC desktop connection, but fortunately it still works. Thanks for all!

@retrotony4119 4 жыл бұрын

Thank you for this. I Finally got an lcd I thought I would never get work to operate.

@garryzhuang303 5 жыл бұрын

Very helpful, this was one of the best tutorials out of all the others!

@TrickiKnow 5 жыл бұрын

Thank you so much for the compliment bro , have a nice day 😆

@martondobras-vincze6123 4 жыл бұрын

Thank you! Worked 100% for first try... even i installed my screen before after a reinstall i had to do it again, so this was 1000 times less pain than before! TY!

@cyberwolf5075 5 жыл бұрын

Thank you! A modern/recent video that helps me understand why my pi wouldn't work!

@TrickiKnow 5 жыл бұрын

You are welcome ☺️

@RonSamson 4 жыл бұрын

Thank you. You made it so simple. Works like a charm.

@johnredorn 5 жыл бұрын

It worked I got my screen up and running thank you for the video.

@kc8302 5 жыл бұрын

Thank You!!! This worked for me, you made this very simple!!!

@mbisson5816 5 жыл бұрын

Just what I needed, thanks. I bookmarked your blog.

@bellym1251 5 жыл бұрын

you sir are a legend, this worked perfectly on my raspberry pi3 model b+, thanks so much , liked and subbed

@TrickiKnow 5 жыл бұрын

Thank you so much for such a nice compliment , have a wonderful day 🙂

@jacobtran7892 5 жыл бұрын

How do I convert my raspberry pi back though? I want to be able to project it into the big screen again

@firewall8985 4 жыл бұрын

Thank you so much!! I wish I found this video first, it saved me so much time. hitting the subscribe button now.

@markdavidson149 5 жыл бұрын

Awesome video, very easy to understand. Worked perfectly. Thank you!!!

@TrickiKnow 5 жыл бұрын

Welcome , subscribe my channel for more raspberry pi videos 🙂

@salmanhaleem2398 5 жыл бұрын

Thanks for presenting in such an easy and humble way... let's connect :)

@IronCross82 5 жыл бұрын

I just wanted to say thank you I do appreciate it

@YasserIsmail 5 жыл бұрын

Man, you are the best .... this was one of the best simple video I have ever seen, well done you made my day finally something working :)

@TrickiKnow 5 жыл бұрын

Thank you so much for the compliment, my good work will continue always 😀

@SlamDunkYaJunk 5 жыл бұрын

WOW!!!! Everywhere else i've looked, the method was extremely complicated!!! Thanks a ton!!!

@TrickiKnow 5 жыл бұрын

Welcome bro , watch my retro game console build video too: kzfaq.info/get/bejne/iNuknNOq2bHUYKc.html 😍

@raandomplayer8589 5 жыл бұрын

thank you very very much. Short, simple and easy to understand!

@junebug3dprinting979 4 жыл бұрын

Got mine up and working with this video thank you sir!

@muzhiwaay 3 жыл бұрын

Didn't work, now the pi won't show anything on the screen or my monitor

@Ri-Ci 4 жыл бұрын

Thank you! Simple and easy. I used a Kuman 3.5" touchscreen from Amazon with a RPI 3 B+, the only issue was although the lcd-show folder was clearly there, it wouldn't allow me to set permissions with chmod from the command line, I just skipped the part and was able to set the permissions later once I had the screen running.

@Dang33305 6 жыл бұрын

It worked ! I cant believe it ! Thank you so much !!!

@TrickiKnow 6 жыл бұрын

Most Welcome bro , , i glad to see my video worked for you. Thanks for watching , Have good day 😀

@adamshaban1 6 жыл бұрын

Awesome this helped me get the screen working with the Raspberry Pi 3 B+!!

@protuningaustralia6795 5 жыл бұрын

Hi mate, another great video by you. Thanks for your help. I really appreciate the effort you go to to make these video to help people such as myself. Regards Dave.

@garrapunchita 5 жыл бұрын

Thanks a lot man!! I was a little frustrated with the Chinese screen, but finally is fixed :)

@TrickiKnow 5 жыл бұрын

Welcome bro , thanks for watching 😀

@familyplans3788 Жыл бұрын

THANK YOU !! after ages trying to get my screen to work i simply followed your instructions and i am a happy bunny , subd

@valley_robot 5 жыл бұрын

Thanks buddy, waiting on my screen

@Siktah 2 жыл бұрын

thankyou very much. For those wondering the old Waveshare Rev A screens work with this. Thank you from Australia! I used to battle with these TFT screens years ago when they first came out!

@michaelkoch3367 5 жыл бұрын

Thanks for the Video. Display from my Pi works after the Instruktionen fromm you. Thanks and a nice Time. Greatings from Germany to you.

@madladhobson 5 жыл бұрын

You made that sound so easy. Cheers

@TrickiKnow 5 жыл бұрын

Thanks for watching, check out my new videos too

@v-king936 6 жыл бұрын

thanks a lot for the fastest ans easiest way to make it work !

@TrickiKnow 6 жыл бұрын

Welcome , thanks for Watching my video 😀

@skillz4life360 5 жыл бұрын

worked perfectly thanks a lot

@granolakitti8521 Жыл бұрын

This is a nice tutorial, thank you! Is there a way to get a faster update rate on the screen?

@simplyinterpreting 5 жыл бұрын

Nice post and worked quickly. Impressed! Thank you.

@TrickiKnow 5 жыл бұрын

Thanks for watching

@gregnorris8279 3 жыл бұрын

Quick thanks from Finley, Australia. Followed your guide, job done. Working a treat. Cheers

@TrickiKnow 3 жыл бұрын

Glad it helped, thanks for watching 😊

@dr1v3r1965 5 жыл бұрын

Thank you for this video! very helpful... how do you connect via cell phone hotspot? thanks in advance!

@robrobinette 4 жыл бұрын

Worked for me, thank you very much TricK.

@TrickiKnow 4 жыл бұрын

Welcome

@RubenMaxtral 5 жыл бұрын

Thaks so much, you save me :D

@TrickiKnow 5 жыл бұрын

welcome

@ziziky3 4 жыл бұрын

Great video man, thanks for the easy to do tutorial! (y)

@Harry-Powney 3 жыл бұрын

Thank you... it worked great for my PI 2

@gurinders.647 5 жыл бұрын

thank you sooooooooooooo much bro this vidoe is so helpful ,thanks

@TrickiKnow 5 жыл бұрын

Welcome , Check out some of my other videos 🙂

@Lavagemstomacal 6 жыл бұрын

Thank you so much!

@wolfmantrucker1541 2 жыл бұрын

Hey I'm new to this stuff and I love your videos I must say you kinda inspired me to get in to pi's but I'm trying to do a SD card reader for looking at my wildlife camera but couldn't find any videos on that

@androidlegends1334 5 жыл бұрын

Большое спасибо) Отличная инструкция!

@elektron2kim666 Жыл бұрын

Worked for me. Thanks. My first RPi (3B)

@theglymp Жыл бұрын

thank you so much, this helped me out bigtime!!!

@anwarann9095 6 жыл бұрын

Super as always nice setup n installation of device

@TrickiKnow 6 жыл бұрын

Thanks for watching bro 😀

@ohiodude38 4 жыл бұрын

Super easy to follow your instructions and get the screen display to work. Once the Pixel OS displays, the screen doesn't accept any input and even using keyboard/mouse, the cursor won't move. Is there a way to code the display to mirror on HDMI output so that both screens are on at the same time?

@andrewcozier1888 3 жыл бұрын

Very clear details.....awesome! Thanks for the help!!!

@patrickstumpf881 5 жыл бұрын

Very usefull. Thank you for tutorial.

@romanlyamzin3264 5 жыл бұрын

Thanks man, it really works...

@hidanone 3 жыл бұрын

Thank you chief, great tutorial

@denpar5450 5 жыл бұрын

спасибо Друг. Два дня я не мог подключить экран,как только зашёл к Вам на сайт,через три минуты экран заработал.

@TrickiKnow 5 жыл бұрын

Добро пожаловать, братан, посмотрите мои новые малиновые пи видео 🙂

@mojmirbalko4663 5 жыл бұрын

It works. Thank you man...

@TrickiKnow 5 жыл бұрын

You are welcome , Please watch and comment on my new video: kzfaq.info/get/bejne/j6ughqyoxpa8h4U.html

@autobotgrimlock8474 5 жыл бұрын

works great! Thanks for the video

@oceanseabear 2 жыл бұрын

Brilliant. Worked straight away on my Pi4. Many thanks! Mike.

@blakegray9883 2 жыл бұрын

What are you using the display for? I am keen on getting one but I am not sure why it would be good

@oceanseabear 2 жыл бұрын

@@blakegray9883 Hi Blake, I'm currently using it as an addition to my Ham radio hotspot to show my DMR radio dashboard. Trying to keep my equipment as portable as possible. TBH the screen is smaller than my phone screen. Probably getting a 7"/8" screen that fits to Pi would be more useful for more applications. M.A.R.

@AK-fw6cr 6 жыл бұрын

This works great, thanks. One issue is my keyboard and mouse have stopped working - how do i get them to work as well?

@TrickiKnow 6 жыл бұрын

Install the fresh copy of raspbian to fix your mouse keyboard problem 😀

@SimilakChild 4 жыл бұрын

Thanks! I guess I can get the 3b instead of the 4b now that i know the cheaper LCD's are compatible

@redslashed 2 жыл бұрын

Thank you sooo much i tried soo long omg

@sunjijungsunji5161 5 жыл бұрын

Thanks for useful video, but I am wondering if Raspberry Pi can display on both 3.5 inch LCD screen and desktop monitor at the same time. Thank you in advance

@Swaggmade 3 жыл бұрын

Thank you. This got my screen working in seconds, while I’ve been trying for days searching online with no luck. It really is super easy. However, is there a super easy way to uninstall it? Not revert it back to HDMI, or disable it, but completely remove the script, or completely undo what the script does? Thanks!

@aqua1362 5 жыл бұрын

Thank you, works well with my old R pi model B !!

@TrickiKnow 5 жыл бұрын

Welcome sir 🙂

@ok.google 2 жыл бұрын

That's very useful, thank you!

@derekflynn6431 5 жыл бұрын

Thank you sir

@dukora53 5 жыл бұрын

Thank works reliably

@thydev6 4 жыл бұрын

thanks very simple and helpful

@ianharris9260 4 жыл бұрын

Thanks it worked My one is the touchscreen but the touchscreen functionality won’t work on it what is the command line so I can get the functionality for the touchscreen to work

@thomas.alexander. Жыл бұрын

Nice clear instructions. Thank you...

@harmanndhiman9492 3 жыл бұрын

Totally subbing and liking

@AdLast 5 жыл бұрын

awesome outro-music ! +1like

@TrickiKnow 5 жыл бұрын

Thanks for enjoying, i use that outro music mostly all of my new videos 😀

@wpmaia 2 жыл бұрын

Finalmente um tutorial que funciona no Rasp!

@adalbertocalza9318 2 жыл бұрын

por favor amigo sera que funciona com 3.2inch rpi lcd v4 com raspberry pi 3 b+ , obrigado

@slicedpage 4 жыл бұрын

I have tried various ways and this way worked thank you very much. HOWEVER LOL the mouse is opposite to where my finger is any idea to get it the right way round?

@franciscohidalgog 5 жыл бұрын

Nice video if I want to plug to a 55 inch display , do I need to change the code ?

@trailervert 23 күн бұрын

Thank you . That worked with my Pi3 B+ running bookworm

@marcoreviews 4 жыл бұрын

You rock! Tried it and it works perfectly! Is there a code that allows the small screen and a larger one at the same time time or can you only have one running at a time?

@jimkozmo667 5 жыл бұрын

Thank you!!

@TrickiKnow 5 жыл бұрын

welcome

@sebastianheidenreich7376 3 жыл бұрын

very nice video well explained where to get the touch display to work is really not a big challenge ... but i'm looking for a way to use the 3.5 inch dsplay and my hdmi output at the same time i don't want to be on the all the time look small display !? I'm curious if you know something :)

@Taran72 5 жыл бұрын

great video!! thanks! :)

@TrickiKnow 5 жыл бұрын

Welcome, Have a good day 🙂

@1mouseman 3 жыл бұрын

Wonderful!!! Thank you so much

@Epsato 6 жыл бұрын

It works! Now to see if I can add Retropie and some emulators to get this working the way I want it!

@Epsato 6 жыл бұрын

I was able to use the Kuman TFT screen with this and have loaded Retropie. Does anyone know how I'd be able to "launch" retropie? I can't seem to get it to turn on. I guess that'll be the next challenge.

@manoelbarrosmarin2698 4 жыл бұрын

It works :) Thanks a lot!!!

@soumitridas5968 6 жыл бұрын

ok thank you brother.you are the best KZfaqr.I always like you videos.

@TrickiKnow 6 жыл бұрын

Welcome bro , feeling proud because of subscribers like you 😀

@checkmateblue 4 жыл бұрын

Thank you very much!

@MCAQUIN0 5 жыл бұрын

I'm happy it's in english

@mitchelroch3528 5 жыл бұрын

Ur the man buddy!

@ParkerConte 6 жыл бұрын

ooOOOOooooOoooOOO good video!

@TrickiKnow 6 жыл бұрын

Parker Conte Thank you so much for watching , have a good day 😁

@vladdubrowski1058 3 жыл бұрын

Hello, it worked. I used Octopi as the operating system. Thanks

@TrickiKnow 3 жыл бұрын

Great 👍

@blackoutthedemon2656 5 жыл бұрын

is it possible to use the screen with retropie? i want to have something portable to play on while im on my camping trip next month. thanks for the help!

@gyear2000 4 жыл бұрын

Can you make a tutorial about programming this LCD Touch screen 3.5 inch using Retropie and OSMC, please!

@marsandbars 5 жыл бұрын

Nice! Will do.

@SquallDNA 5 жыл бұрын

Hi thanks for the tutorial. However, im experiencing very low frame rate., Is that normal? Im using rp3b.

@TrickiKnow 5 жыл бұрын

may be your LCD needs different driver 🙂

@rxgtv 3 жыл бұрын

Try MHS35

@GDoggProductions 4 жыл бұрын

can you fit a fan inside the enclosure with the LCD screen attached :D ? great video btw ^___^

@rxgtv 4 жыл бұрын

Some can do that :D

@elpacificador93 5 жыл бұрын

great vid bro!!! question , my screen works well but the touch input doesn't work... :( any hits of the problems?

@cyberwolf5075 4 жыл бұрын

Are you using the pen given to you? It doesn't pick up much else, a year ago I tried the pen on my 3DS and it dident work, but it does on this, I tried my fingers, it dident work, so that might help, unless you allready figured it out yourself