How to install 4th Gen Mazda3 OEM front lip

Рет қаралды 18,876

Күн бұрын

Timestamps:
0:00 Intro & Setup
2:26 Surface and Materials Prep
3:16 Placing Templates
5:54 Drilling Holes
7:08 Removing Underbody Panels
11:16 Removing Splash Shields/Pin up Underbody
12:40 Surface Prep again
15:02 Putting Lip On
17:36 Putting All Panels & Shields Back On
20:30 Removing Tape & Final Fitment

Пікірлер: 59

@trogdor21997 15 күн бұрын

I purchased this from BAM Auto Parts or BAM Wholesale parts online. It may or may not be in stock when you look now. As long as the part # is correct, you can buy it from any reputable Mazda parts dealer (BEMDV4900) FYI The exact part number might change on newer models

@Zizou19989 Жыл бұрын

Will definitely be using this when i can finally find a place that has this in stock 😭

@jayreynolds1809 Жыл бұрын

Just a heads up, whenever doing something like this. Do a mockup first to make sure everything will line up and fit correctly before drilling any holes. Nice job describing what you were doing during install. The only way to gain experience is by doing and learning. Keep it up.

@Caleb-dn7yq Жыл бұрын

Great video, clear instructions!!

@schweaty7692 Жыл бұрын

I just did the install a few days ago as well. i placed the template like how u had it (between the white paint and black unpainted)but also did a test fit prior to drilling. Turned out to be quite off so i repositioned the template where it touches the ridge on the very bottom of the bumper cover which ended up to be the correct drilling locations.

@trogdor21997 Жыл бұрын

Yeah that sounds about where the template would be if you put the black lines under the paint line like I had the text in the video say. Idk why they left such an important step pretty ambiguous

@Games4Days912 Жыл бұрын

Didn't have to worry about it bc my PP turbo came with it! Love my 3!

@trogdor21997 Жыл бұрын

I’ve essentially PP’d my base turbo. Installed the lip, the spoiler, and got the navigation SD card. Only thing I’m missing is the 360 camera and the perforated leather!

@Games4Days912 Жыл бұрын

@@trogdor21997 sounds awesome. Is yours NA or the Turbo? I had a 2019 NA hatch and traded her in for the 2023 Turbo PP. The power difference is CRAZY. I absolutely love the car. My 5th Mazda 3 and now a 3 that's fast AF.

@trogdor21997 Жыл бұрын

@@Games4Days912 Haha I actually also had a ‘19 NA and then traded for a ‘21 base turbo. Easiest place to tell the difference was overtaking on the highway. Like night and day

@Games4Days912 Жыл бұрын

@@trogdor21997 yeah and the low end as well. All that torque is super fun. Highway speeds she takes TF off. Such a fun car to drive. My only complaint is when youre ripping say goodbye to your gas 😂

@csbeverly1 Ай бұрын

If they sold the turbo with a manual or dual clutch I'd be turbo all the way. Mazda makes a fantastic manual transmission:)

@michael5519065 Жыл бұрын

Great video

@JC-zl7go 11 ай бұрын

i think id rather use 3m tape rather than drilling the car

@ricardoestrada8478 5 ай бұрын

Could you share the purchase link

@CoffeeTechClub 8 ай бұрын

Do you think automotive 3m tape in place of the drill holes be solid enough? Im thinking about still sandwiching the splitter in between the lower plate, screwing it in, but using thing automotive tape on the sides where the screws were drilled. Im not too fond of the idea of drilling into my car specifically if it’s a part that could get damaged.

@trogdor21997 8 ай бұрын

Yeah if you put all the other screws in, you’re probably fine. It’ll be tough to redo once it’s stuck on so make sure you get it on right

@CoffeeTechClub 8 ай бұрын

@@trogdor21997okay I will definitely consider it. The other guys tutorial he didn’t take off the lower plate hence why he ended up with a gap. He just screwed it over the plate from what I could tell.

@cllllllllll 3 ай бұрын

based on what you have shown in the end, you didn't really need to take the bottom covers off at all to install this. just undo the fasteners and some bolts and those those holes to attach the lip?

@trogdor21997 3 ай бұрын

You cannot reach the screw holes that you drill into the body unless you remove those covers. It’s the one part I didn’t film but made a note of.

@dawsonvandecar1612 Жыл бұрын

@stradysworld has been called out 😂

@jamiesamphere1275 11 ай бұрын

Do you have PDF’s of those templates available?

@trogdor21997 11 ай бұрын

No mine all came in paper. You might could dig around online and find them with the instructions

@upijhaj 7 ай бұрын

Do you mind if I ask WHERE you bought the front lip ? Mine came with it, but it got smashed last night. Mazda wants $575 plus tax plus $200 instal just for the front lip !!! ANYONE KNOW WHERE TO GET AN OEM MAZDA3 FRONT LIP CHEAPER ? Thanks I’m in Toronto, Ontario, Canada by the way.

@trogdor21997 7 ай бұрын

Got mine from BAM auto parts. Not sure about Canada

@upijhaj 7 ай бұрын

@@trogdor21997 Thanks for the info. A BIG : THANK YOU, to yourself and also to : BAM AUTO WHOLESALE, In Brunswick, OHIO. I reached out to them, but unfortunately the part is sold out/ back ordered. But BAM’s customer service is AMAZING. They replied to me within 2 hours !!! (Which is great considering some auto stores ignored me period, when I said I’ll drive down from Toronto, Ontario, to pick it up !) If anyone knows where to buy an OEM 2023 Mazda 3 Turbo, front lip -spoiler, aero kit, I’d sincerely appreciate your help ! -Much Love from: TORONTO, ONTARIO, CANADA 🇨🇦!!!!

@OtenP_ Жыл бұрын

I’m at work watching with no audio, curious why drill holes in the white paint? If the clips are on the bottom of the car

@trogdor21997 Жыл бұрын

17:26 - I forgot to film it but the first step once you place the lip on is to put a screw in those holes I drilled and tighten them down

@OtenP_ Жыл бұрын

@@trogdor21997 okay I still don’t see why, so those pre drilled holes from the inside you put the screws once you out the lip on?

@trogdor21997 Жыл бұрын

@@OtenP_ There are screw holes in the lip that line up with the holes I drilled in the bumper. While underneath the car, you place and then tighten screws in those holes so that it’s secure and flush all the way around. The ones underneath that I show during the reassembly steps are not the only screws. I put a little text note at the bottom there at 17:26 describing it

@OtenP_ Жыл бұрын

@@trogdor21997appreciate the responses, I was just questioning it because I have the turbo version with the from lip installer from factory and sucks knowing if I would to remove it some day there will be holes there

@johncarlocastillo3958 11 ай бұрын

@@trogdor21997where did you get the screws? This is really hard to follow coz you didnt film the part where you put the screws in the middle. So i am missing this thats why my front lip moves.

@Lenny1305 2 ай бұрын

Where did you buy it?

@charliemendez1479 10 күн бұрын

Mine came crashed already from dealer and they keep it silent, I noticed later.

@hectorin411 16 күн бұрын

Where did you get your front lip?

@trogdor21997 15 күн бұрын

@@hectorin411 pinned comment

@ivanm6490 4 ай бұрын

Will this work on the sedan?

@trogdor21997 4 ай бұрын

99% sure it will not work

@justinluu2553 Жыл бұрын

Strady's world did a similar video but it doesn't seem like he had to drill anything. How come?

@trogdor21997 Жыл бұрын

He did not follow the instructions from the manufacturer

@justinluu2553 6 ай бұрын

@@trogdor21997 Hey, one more question, did end up installing the air deflector thing that looks like two metal brackets? It says in the instructions it is required, but I'm not sure how or what it even does.

@trogdor21997 6 ай бұрын

@@justinluu2553 No, I honestly forgot about that

@jackgamble6120 2 ай бұрын

After watching the intro 0:00 - 2:25 ...I said to myself, "Hell no!" Good informative video though!

@user-cv1gv5wm1s 9 ай бұрын

Donde se puede comprar

@trogdor21997 9 ай бұрын

I got mine from BAM Auto parts

@Sadhiiio Жыл бұрын

where can i buy it?

@trogdor21997 Жыл бұрын

I got it online at BAM Auto parts but alot of places are sold out right now

@tylerdryman Жыл бұрын

@@trogdor21997do they make them for the Mazda 6 as well?

@Joao_Leiva Жыл бұрын

Link please 🙏

@trogdor21997 Жыл бұрын

@@tylerdryman I don’t think there is an OEM lip for the 3 or 6 sedans

@tylerdryman Жыл бұрын

@@trogdor21997 thanks for letting me know

@jackgamble6120 2 ай бұрын

Interesting...I just watched another video about installing the same OEM lip on his Mazda 3. However, his install had ALOT fewer steps. Also, no drilling or templates used and no splash shields taken off. Maybe I'm missing something, but here is the link: kzfaq.info/get/bejne/Y9eEjamWt9enf58.html

@trogdor21997 2 ай бұрын

You have to take the shields off to put the screws in the holes you drill into the car

@jackgamble6120 2 ай бұрын

@@trogdor21997 Yes, you make sense. The guy in the other video may have some issues when he travels at high speeds on the highway.