How To Install 80cc 2-Stroke Bicycle Engine Kit FULL DVD 66cc 48cc 50cc

Рет қаралды 2,996,396

Күн бұрын

Click Here to watch the NEW 2016 Installation Guide ► • UPDATE: How To Install...
Download the 2-Stroke Engine Kit Installation Manual ► bit.ly/1N3y76a
www.bikeberry.com/gas-engine-k... - BikeBerry.com technicians, Jonny and Matt, go over tips and tricks on how to install an 80cc, 66cc, 49cc or 50cc 2-stroke engine kit on a standard beach cruiser. This complete installation manual gives great advice on installing the complete motorized gas bike kit as long as the bike is a 26" Men's beach cruiser. By providing this extensive tutorial guide, we are here to help turn your bicycle into a motorized bicycle.
Table of Contents:
0:15 - Picking the right bike
0:58 - Parts List
2:02 - Sprocket Assembly
5:28 - Mounting the Engine
9:23 - Installing the Clutch
11:01 - Installing the Chain + Pulley
13:51 - Installing the Throttle Assembly
14:48 - Installing the Carburetor
16:25 - Installing the Electrical Components
17:36 - Installing the Muffler
17:43 - Installing the Gas Tank
19:01 - Installing the Chain Guard
20:10 - Maintenance and Fuel Mix
Got any other advice? Any questions about the installation? Leave a comment!
Follow us:
Facebook: / bikeberrycom
- We share great tips, tricks, and advice as well as show off many of our fan's custom built gas bikes. Wanna share your build? Come join the community!
If you you're still reading this, that means you must really like us! Subscribe for more videos. Thanks!
Credits:
"George Street Shuffle" Kevin MacLeod
"Faster Does It" Kevin MacLeod
"Mining by Moonlight" Kevin MacLeod
"Hightlight Reel" Kevin MacLeod
"Breakdown" Kevin MacLeod
Licensed under Creative Commons: By Attribution 3.0
creativecommons.org/licenses/b...

Пікірлер: 2 000

@claybornlewis276 2 ай бұрын

I love the way you said your oil is as follows the oil mixture And then there was nothing there

@user-fc1zs1wh9g 21 күн бұрын

he aligned the cut in the rubber right where the plates meet for the sprocket ....would not have done that but whatever

@user-fc1zs1wh9g 21 күн бұрын

what the hell is he talking about forward peddling cranks lol what are you gonna do peddle sideways ???? he means the bottom bracket is set more forward on the frame

@gamerush7117 3 жыл бұрын

Thanks bro all I needed was a bottle in the back wheel

@jamram7825 3 жыл бұрын

Hacks to save time. 1.Instead of taking the clutch covers of the engine, engage the clutch with the hand clutch lever provided and place one end of the chain into the engines sprocket and rotate with your finger the under side of the engines sprocket so that the chain rotates outward and chain comes out the other end. 2. Hide the white wire off the CDI if you are not going to add any head lights to your bike. Coconnect the colors that match first and then connect wires that appear to be ground to the black one for example brown or green. then you guess right their is one wire left to connect I'll let you figure that one out. 3. Allow enough elasticity on your fuel filter by placing decent amount fuel line hose to avoid any stretching and disconnecting the line and having to replace the hoses and spilling fuel. 4. If your engine is new it will take some time to start make sure to open the fuel line and to open the carburetor. Gas tank opens to the right and carburator opens downward on the lever.

@thedailydude2 Жыл бұрын

fuel or oil?

@user-kn1yr9di8w Жыл бұрын

@@thedailydude2 gas, 92 octane

@marilynmanning2887 9 ай бұрын

@jamram7825 9 ай бұрын

@@thedailydude2 I no longer suggest doing this to avoid confusion and damage to you engine I'll remove that part

@AceThePeasant 6 ай бұрын

A mechanic told me that if I'm not confident that i can finish the project, i can do all the parts that dont remove the chain from the bike and do the engine and bike part last. Would that be smart or just take on the project in a day

@user-oy5vp9pv8e 9 ай бұрын

Ive heard trash talk about bbr.. but clearly no other company is as clear and informative as y'all. Thank you

@Strickn9ne747 3 жыл бұрын

So I've went into the rabbit hole. Ordered the stage 4, got it.. inspected it and assembled. Now just waiting on my Nel Lusso to arrive. This is gonna be too fun

@colewilliams3437 Жыл бұрын

I just got one of those. Waiting for it to come. How has it been for you?

@tylercurtiss1351 Ай бұрын

Woohoo

@AutumnTg Жыл бұрын

This was by far the most helpful video I found yet it’s simple fully explained and pretty professional delivery with instructions Thankyou 😊

@teambuckshot3310 Жыл бұрын

I just installed my pexmor moter I couldn’t have done it without you! Thanks so much.

@xanderestrada5584 3 ай бұрын

Just ordered mine wish me luck 😅

@CycoMoe 3 жыл бұрын

Tip: at 11:21 when he says to remove the flower nut you have to hold the clutch pedal in while pushing down on the cover to free up the flower nut, I was stuck with that problem for a couple of days until I watched another video on clutch troubleshooting so I thought I should share my experience

@vinniecasella3849 Жыл бұрын

why do u need to take that off anyways can i just skip this step

@dominichebert9884 Жыл бұрын

@@vinniecasella3849 No because it will stop the gear that the chain is attached too from spining freely and you won't be able to attach the chain

@dylanfrancisco9550 3 ай бұрын

@@dominichebert9884no.. use the socket on the nut for the sproket that comes with the kit to spin the chain on just make use clutch lever is locked in

@dylanfrancisco9550 3 ай бұрын

dude are you still alive.. cant believe someone that doesnt know the difference between a pedal and a lever is trying to build a gas bike lmao

@user-fc1zs1wh9g 21 күн бұрын

fuel on off switch/ fuel valve is called a petcock

@sandeepsompalle7821 4 жыл бұрын

This is the only video on youtube which gave me dimention requirements to fit a engine on a bicycle. Appreciate your great work :-)

@teamnumbskull2846 Жыл бұрын

It's always good to take some old bike tire tube that's cut into strips and wrap them around where the tube of the bike where the engine touches the frame between the engine and the tube on front and back, it helps reduce vibration a fair bit and shake and it keeps the engine from digging into the metal of your bike tubing

@18jonathan91 2 жыл бұрын

i appreciate this video. i just bought myself a zeda 80 firestorm kit, and it looks like after a couple watches, I should be able to do this without a problem. I love how in-depth it is, and how nicely the video is set up. thank you again for the help, cant wait to start riding

@robertstrohlin6051 2 жыл бұрын

Its not in depth though!? Johnny barely showed anything about what he did there with the magneto loop! Wtf man???!

@thirdeyesurvivor3886 Жыл бұрын

I just got the same kit, I’m installing it on a schwinn OC Chopper

@skazzy021 9 жыл бұрын

with my dad i got bought parts that we needed and thanks to video i made my bicycle with enginge thanks alot man!!!here is like+subscride

@2strokecarbtuningportingin187 2 жыл бұрын

kzfaq.info/love/PRPIP5uWB5cR8LgQq4qTDA

@thewaffle3945 20 күн бұрын

9 years is he brave to answer if it works?

@cowloverman27 9 жыл бұрын

I will be getting a motor sometime in the future for my bike, and I saved this video for that time. Very simple to follow, steady camera, and not rushing.

@humaliba5426 2 жыл бұрын

Hey , ever get the bike :)

@furkii334 Жыл бұрын

@@humaliba5426 i think he didnt

@brisay1844 5 ай бұрын

This was the most excellent , thorough, and helpful "how to" video that I have watched. Amazing job, you guys. I wonder if it would be possible for you all to make a video that explains how to install the brakes. Getting it to go is one thing, but there is a real problem if I can't stop it. Thank you guys so much.

@senecan100 9 ай бұрын

Of all the videos and info I've looked up considering these engines this is by far the absolute best there is. My bike is nothing like these new easier models lol. It's a fat butt Shwinn Stingray and I still got it mounted within an hour of watching this. Tho the electric wiring part could be a tad better in explanation as not all the engines come with those colors and it's rather easy for newbies to cross wires. Other than that absolutely awesome job on this 👍

@austindovel2139 9 жыл бұрын

the fuel ratio is as follows........... and thats it. what wheres the ratio?

@DuBstep115 8 жыл бұрын

+Austin Dovel I would use 1dl to 5L making it 2%

@codyhastings8902 8 жыл бұрын

I actually bothered to do the math and the calculator says the instructions translate to 3.125% oil per volume, I usually add 4 oz. of oil to a gallon of gas (conveniently measured by a mason jar :p )

@lilgee5894 6 жыл бұрын

32:1

@abdirahmanmahdi626 5 жыл бұрын

Yeah

@Daddychill945 5 жыл бұрын

@@codyhastings8902 can you teach me how to do the ignition

@paramandans 7 жыл бұрын

I made the mistake of listening to people and watching videos about building a bike. They said never use rubber motor mounts. Big mistake as I had nothing but problems the whole time. Finally mounted it with them and it made all the difference in the world. Always always use rubber when mounting a 2 stroke.

@troytedesco2728 7 жыл бұрын

Thank you so much! This is really helpful. It is a very well organized video! 🙏👍.

@Mark-vd8oi 7 ай бұрын

GOD BLESS YOU..BEEN TRYING TO BUILD ONE OF THESE.IM WAITING ON A NEW KIT.. I REALY NEED IT TO WORK N FUNKION

@stowjer 9 жыл бұрын

Great video. Very good instructions!

@xnightxdreamerx 9 жыл бұрын

I found this video to be perfectly instructional as well as helpful. Thanks for taking the time to create and post it :)

@chinomatra4680 3 жыл бұрын

Your video was very helpful to me to finish my application on my bike am very pleased with it. Thank you much appreciate.

@Grady_OBS 8 жыл бұрын

For those wondering, here are the fuel ratios (I think) Break in: 18:1(6oz oil per Gal) After Breakin : 24:1(5-6 oz Oil per Gal)

@wingerrrrrrrrr 3 жыл бұрын

18:1 should be 7.1 oz oil to a gallon. 24:1 would be 5.3 oz. Too much oil leans out the fuel mixture since it's getting less gas and will run hotter, so more isn't better.

@arablakba6988 3 жыл бұрын

@@wingerrrrrrrrr so don’t fully full up the petrol tank

@uhtehz2362 3 жыл бұрын

Its 8oz. For break in period then after that 5-6oz

@KClO3 2 жыл бұрын

Use 1:40 right from the start or the rings will never seat

@morrisjohnsonakamj6346 2 жыл бұрын

@@wingerrrrrrrrr less gas = less heat not more heat! more oil less wear

@Gramma_Is_pissed Жыл бұрын

Fantasic video! I’m a 56 year old woman and am positive I can do this! Being mechanically inclined as I am. Thanks for such a great job ❤️ Just got my kit yesterday. Lets gooooo!!!!

@illkid86 10 ай бұрын

I'd love to take u out on a date

@MrThatnativeguy 7 ай бұрын

You’re too old and frail to handle that braaap

@C.D.J.Burton 9 жыл бұрын

I couldn't help but notice this in reccomended videos, makes me want to get one now even though I have a 125 already! Really good tutorial, one of the best well explained tutorials to date!

@00Anthonyhughes00 10 жыл бұрын

This is a very useful video i actually enjoyed this instructional video

@bikeberrycom6539 10 жыл бұрын

Anthony Hughes, Thanks!

@wrjazziel 8 ай бұрын

Thank you so much man for putting a lot of effort into this video and instructions, super useful!

@RonsGaming 6 жыл бұрын

This video helped alot! I used this video to install my motor!

@tylerhughes192 8 жыл бұрын

Thanks for the video got my bike built in one day

@mrpotatoman5678 3 жыл бұрын

I wanna do this does it still work

@gameattack1989 3 жыл бұрын

@@mrpotatoman5678 Yes

@mrpotatoman5678 3 жыл бұрын

@@gameattack1989 k

@iv0hh 8 жыл бұрын

Thanks man i'm almost sure i'm getting one and installing it myself now after watching this.

@sonumwgdjvdj1624 3 жыл бұрын

01309959995

@GamingMaster-us7ty 3 жыл бұрын

BEST VIDEO INSTALLATION GUIDE. WELL DONE THANKS AND MORE POWER TO YOU ALL

@turboroscoemaguedavedicker7281 5 жыл бұрын

Good Show. Thanx for sharing. Very informative. I bought one already assembled. Carry on

@JoeHYu92 9 жыл бұрын

This is by far the best video on how to build on of these things.

@adrianolehmanlmt 8 жыл бұрын

great video! am starting my build today and this helped so much

@walkerfharris 3 жыл бұрын

did you finish it ever? how is the bike doing?

@adrianolehmanlmt 3 жыл бұрын

@@walkerfharris built 4 since then with a 5th ready to be built. i using an rat bike with oversized frame and tires. just trying to figure out how to mount the engine

@adrianolehmanlmt 3 жыл бұрын

i think i am ready to do some commercial builds for resale. also bikeberry.com is a great source of parts and kits if you have not already checked them out

@jodysowder6780 2 жыл бұрын

I bought the 100cc anbull kit...the kit was missing about everything ...so in luck I had most of everything I needed from my old kit...well this video has helped me in putting together my bike with the parts left over

@kofelee2358 4 жыл бұрын

It's kinda cool working on the tips for my own and learning thanks bro

@kiwinade2455 5 жыл бұрын

best tutorial on youtube hands down for these builds

@FAMBAM_REVIEWS 9 жыл бұрын

best tutorial out there.... had I watch this the first time I would not be going back as I am now to correct things :) thanks for taking the time to make this vid!

@backa5750 4 жыл бұрын

NFORSA you need to put the clutch in ride the bike and let go of the clutch the engine will start use the clutch

@brandonmcnew9307 Жыл бұрын

It helps a lot to see how some stuff gets done so you know how to do it thank you I'm trying to get in to it I am a new at all of this

@housearrestband 7 жыл бұрын

thanks for posting this video, it helped alot..over a million views!!... cheers

@Katfellow 9 жыл бұрын

I'm thinking about getting a motor bicycle setup for in-town travel. This is a helpful video.

@bikeberry 9 жыл бұрын

***** We love using our motorized bikes to get around the city as well!

@cadenswain158 9 жыл бұрын

BikeBerrycom i think mine is missing the coil and a couple other things and the spokes are in the way of the bolts

@MikeXwolf 8 жыл бұрын

Hi guys! Thank you, this is a great tutorial. It explains a great deal. I got a kit sold to me without the rubber spacers or the universal mounts and it just won't fit. Where can I get those so I can proceed with the build? Do you sell them separately? Thanks!!!!

@eracing9481 4 жыл бұрын

amazon

@rsimier 3 жыл бұрын

Great tutorial guys! Well done.

@davidcrunkmd 5 жыл бұрын

Great video thanks! I'm just wondering if something was left out during the editing of the end of vid. The fuel mix ratio wasnt shown or described in any detail.

@oxfordutd83 5 жыл бұрын

Keep it flat bro....

@2strokecarbtuningportingin187 2 жыл бұрын

kzfaq.info/love/PRPIP5uWB5cR8LgQq4qTDA

@Camz316 8 жыл бұрын

Why am I the only person who wants to know how fast this thing goes?

@J_Jim-mo3ub 3 жыл бұрын

Around 25-30mph

@darrylkinslow5613 3 жыл бұрын

@@J_Jim-mo3ub That's wrong. A 66 cc (80/100 cc don't really exist for bicycles) can go up to 80kph or 110mph if tuned right and built right, out of the box it can go 50kph 80mph or faster.

@Dartoras 3 жыл бұрын

@@darrylkinslow5613 One mph equals exactly 1.609344 kilometers per hour (km/h). refresh you numbers..

@darrylkinslow5613 3 жыл бұрын

@@Dartoras Sorry I reversed it,Yeah, I wasn't going for exact, I was guessing. And one thing I do know for sure is that 50mph on the speedometer is about 80kph, so I' m not so far off. But I did mean kph when I said how fast the motor is. I remember catching a ride with U.S. citizens in Canada, they didn't know what kph was, so they were driving at around 110kph, lucky they didn't get stopped. But we got far, pretty fast.

@Dartoras 3 жыл бұрын

@@darrylkinslow5613 I did not want to offend you, I live in the EU and with so much content in the US on the Internet, when I saw it, I thought it was just miss written

@giliethedeliveryman3516 2 жыл бұрын

Thank you for the video it was great to the point I really liked it and I’m definitely going to use you video as I build mine

@codyschleth8929 7 жыл бұрын

Love this thing so much

@mahbeone 9 жыл бұрын

u did such a good job with this video I think even an OLD Woman (like me : ) can fix my 2 stroke bike now! Thanks 4 taking the time 2 do this & posting it on-line!

@colemichael7409 4 жыл бұрын

Just got one of these and mine came with the sprocket tool as well as the front mount piece you just put on your engine. So far pretty straight forward

@turboroscoemaguedavedicker7281 5 жыл бұрын

Subscriber # 39,264 looking forward to seeing y’all again

@silverstacker177 3 жыл бұрын

Gotta love the cracked motor mount to the frame at 6:35 - 7:25

@guybodmanable 9 жыл бұрын

Someone please get these kids a set of wrenches for Christmas! And also have santa show them how to cut and use zip ties.

@TheGabbaWabba 4 жыл бұрын

guy bodman ok boomer at least he’s working with his hands and learning

@embracethestruggleitsreal8221 3 жыл бұрын

These kids did a good job stop hating

@keithduffield5239 3 жыл бұрын

Cant agree more. It's a "how to Video". Pliers on a nut or bolt are not a good "how to",

@jansommer3250 6 жыл бұрын

I was the 26000 subscriber! =D

@jrambo7495 3 жыл бұрын

THANK YOU VERY MUCH FOR THIS MOST HELPFUL INFO!!!!👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼

@euckb Жыл бұрын

Thanks heaps. Hope I have the skill to get her started though. Cheers

@TheJokersFather 9 жыл бұрын

...funny how I had to figure all this stuff out for myself(especially the carburetor assembly) and my build with gas tank Kreem coating took 3 days NOT 2 - 3 hours, like it says on-site, lol. My build was on a Schwinn Errand and it was perfect, not a thing wrong with it. I got speeds of up to 41 mph, until I burnt the brushes out.

@wingerrrrrrrrr 3 жыл бұрын

What brushes are involved with the two stroke motor? Did you mean you burned out the clutch?

@NinjaViking1 9 жыл бұрын

is it just me? or are the Handle bars "up-side down"?

@ludditeneaderthal 6 жыл бұрын

NinjaViking1 yes, but if you look at pics of traditional "board track racer" bikes of a century ago, the flipped bars were "how they rode 'em". On a beach cruiser frame it gives that vintage look, especially if you wear a backward "duckbill" Tweed hat (or kangol), and round lens or "red Baron" goggles. Those puffy thigh riding pants too, lol. Style points count you know!

@mitchellbrowning2666 4 жыл бұрын

It’s just you

@MattsRanger 4 жыл бұрын

Tucking down helps weight distribution & with wind. This is a good compromise vs drops. Kudos to these guys.

@davebeck8973 3 жыл бұрын

Cables are not long enough Had to do something. Also it will be nice when that wire tie breaks at the chain guard and it gets jammed up. Your asking for a crash!

@scottmckinney4291 3 жыл бұрын

Lastly, prepare for spokes to be taken out because the cheap ass China made chain twisted.

@Rapcom1 2 жыл бұрын

I bought one of these motors for my mountain bike and find it fascinating that the parts that they now send out for different compared to what I had received back in the day. I guess they're trying to improve the motors functionality.

@meniogtz 2 жыл бұрын

Thanks to this video I was able to fix the wiring on a bike that i just bought with brand new engine . Wiring wasn’t done right.

@bernieolivera5632 7 жыл бұрын

Compared to the instruction manual that came with my kit. This video is great. Thanks you saved me a lot of heartache and confusion. Here is a tip: When in installing the sprocket I measured the distance from the threaded shaft to the end of the teeth at 180 degrees segments. When measurements equal, this insures that the sprocket is centered.

@vincent10717 2 жыл бұрын

You got an instruction manual?

@meomeo-ue7qd Жыл бұрын

Yeah but see I got this fuel filter...

@meomeo-ue7qd Жыл бұрын

@@vincent10717 yeah what the f*** are one of those

@HardDiskLover 9 жыл бұрын

This is Great. Very well explained. But I must say the Part about the electronics was a little to fast. I just got myself a racing bike in pretty bad shape. I will restore it and add a motor to it :-)

@babulokman2236 2 жыл бұрын

This video helped a lot thanks

@anthonybuddini2828 7 ай бұрын

Superlike, explained so well. Very informative video

@tasosdiamantis 10 жыл бұрын

most helpful info on the net really helped me thanks a lot

@KSpooners 8 жыл бұрын

Ca you upload a vid of how you do this on a Mountain bike or can you try and explain to me of how it is done

@arjunyeleshwarapu 4 жыл бұрын

KSpooners it’s similar but you won’t be able to change gears. if you keep your derailleur, but remove the cable it’ll work

@jacobbutler7942 3 жыл бұрын

@@arjunyeleshwarapu why cant you change gears. Mount the shifter behind the throttle, it has a set screw

@arjunyeleshwarapu 3 жыл бұрын

Jacob Butler yeah that could work... ive kind of stopped using my bike cause of the chain constantly falling off bc its never aligned, and also gas leaks a ton with these things

@brianmccann666 3 жыл бұрын

Exactly the same as this one.

@brianmccann666 3 жыл бұрын

@@arjunyeleshwarapu ... Leaking from where ? Fuel Line ? Heat up the line before putting it on either end. Once it cools it shrinks tight. Pepcock leaking ? Tighten it. Still leaking ? Gastank posts ? You over tightened the gastank posts to the frame...

@jamiestevens1239 Жыл бұрын

Thank you, just the video I needed

@ValentinBeeeeee 7 жыл бұрын

Hello man, thanks for the video, i wanted to ask you whether i can install the engine on a chopper style bike with a smaller size wheel than 26"

@gursharansingh6450 Жыл бұрын

Legends watching after 9year old😂😅

@OlegAverin-nz2fe Ай бұрын

Guess what. Watching in 2024

@timstewart567 4 жыл бұрын

I built one in January 2020. I have probably ridden 200-300 miles since. I ran 16;1 fuel for 2-3 tank-fulls and then moved to 20:1. The engine likes the 20:1 mix and it doesn't smoke at all. It's important to check tightness of everything frequently. Head bolts need a little tweek every few rides.

@Dragnmastralex 4 жыл бұрын

why not use thread tape or thread lock? you can even use double nuts to prevent loosening. and if your really brave use some JB weld behind the nuts on the thread after you tighten them for a permanent solution. Loctite 271 was made just for this.

@dickcock459 Жыл бұрын

no no no, don't use 20:1. using 20:1 will give the engine less power + your engine will have a huge carbon build up inside your cylinder and exhaust ( it will also cost more ). I suggest something like 30:1 watch some videos and find out. 😊

@Davids_Life345 10 ай бұрын

How u make that 20:1 shi boiiii I need to know

@frostedlambs 7 ай бұрын

@@Dragnmastralexthat's correct

@eroreaper2254 5 жыл бұрын

I like the Seth Bike Hacks type music. It fits well with video

@nathanwest4670 10 ай бұрын

I'm actually going to be buying a bike next month that a local here built in Canada Way Down East. And I'm pretty sure the whole shebang came from you. At least the motor and whatnot definitely did. So believe me when I say this, you have Canadian customers. Already have one that I'm working on a building and whatnot but I think it's still a good idea to have the backup. And I tend to trust it where a good chunk of it was built by you bikeberry then the rest of it was put together by a very experienced person. I'm good with the motors as I'm a certified small engine mechanic. However I'm still learning the rest of it which is all very much important. Like making sure your sprocket gets mounted correctly and true so the chain is within its parameters, things like that. And that's where your videos help a lot as well. Therefore I do trust anything that comes from you

@jessegivens8331 7 жыл бұрын

at 20:00, you said the fuel ratio is as follows, but said and showed nothing? What's the ratio?

@bernieolivera5632 7 жыл бұрын

There seem to be various comments on the ratios. I have been reading the ratio should be 16:1 (8oz to 1 gal) and 20:1 or 24:1 for normal riding.

@bryanmurphy1614 6 жыл бұрын

3 oz of oil per gallon

@xturbohd4466 6 жыл бұрын

vilhis Its 16:1 in break in (16 L gas to 1L Oil) and 20:1 after break in (20L gas to 1L Oil).

@paulkogioumtzis4386 6 жыл бұрын

xTurboHD how do you put all that in a 1.5 or 2.5 litre tank sorry I'm a noob at this

@ashmuratti8293 6 жыл бұрын

i think its every 16 L gas its then 1 L oil

@wyzzardfamily 7 жыл бұрын

Awesome video. Made my installation an absolute breeze. Question: can these engines go out of timing? I did a test run, chain tensioner came loose, locked up chain. I fixed it and now don't have any spark... Thanks for any help yall

@gustavosmith3980 2 жыл бұрын

Might have damaged whatever part transfers the mechanical energy of the chain to the magnetic electric device.

@Brian-uj6gm 6 жыл бұрын

Mine came in today and I'm so excited. I'll update you when I put it together and tell you how it goes

@frostyflake1128. 4 жыл бұрын

How did it go?

@kurtkelling1016 Жыл бұрын

My kit came in yesterday and I'm missing g alot of parts that the video shows it comes with... hope you had better luck.

@highdesertoffthegridhomest6718 8 ай бұрын

Great video very helpful thank you

@MattmanCDN 10 жыл бұрын

Cool vid guys!!

@rentatrip1videos 10 жыл бұрын

Man oh Man , I really noticed this guys voice has that distinctive East LA Chicano accent , makes me home sick ... you probably did not even notice but it is a Hispanic Los Angeles Dude talking ! ... video was made in a suburb of Los Angeles !!!

@MattmanCDN 10 жыл бұрын

Check out his other vids you will see and hear him

@rentatrip1videos 10 жыл бұрын

it is a very well made video ...I like the back ground music , cool marimba jazz lay back sounds ...LOL

@bikeberrycom6539 10 жыл бұрын

Matthew Schurter , thanks!

@bikeberrycom6539 10 жыл бұрын

rentatrip1 really appreciate it, man. Thanks for the kind words!

@professorpatpending8731 5 жыл бұрын

Around 110 years ago or so the motorcycle morphed out of the pedal bicycle fitted with an engine of one or two cylinders. The engines used were usually four stroke.

@meomeo-ue7qd Жыл бұрын

That's pretty cool history fact

@Yahooligan72 4 жыл бұрын

Best tutorial on youtube for a diy, thanks a lot man. You saved me time and a headache!! 😁👍👍👍👍

@1212341234alan 2 жыл бұрын

A lot of helpful useful tips there cheers

@HeroRR 8 жыл бұрын

I would love to do this but i'm afraid i'm going to blow myself up.

@johnnynoirman 8 жыл бұрын

Hahahaaha

@nava4057 6 жыл бұрын

nah, thats the least of your worries

@jackm6307 6 жыл бұрын

Yeah, but what way to go...Out in a blaze of glory while riding free as the breeze on your MB. :) I've never had good luck getting these running right off, and some, never. They're some of the touchiest engines I've ever come across, it's either an unknown problem, or parts are bad, so getting them to run long enough TO blow myself up might be a welcome event :) Agree, the least of your worries.

@thecanadiansteamengineer282 6 жыл бұрын

Sk0dus Stuff haha

@desireytaylorchannel4639 6 жыл бұрын

HeroRR kzfaq.info/get/bejne/bKpmo7KQv7rYdXk.html

@theone2be33 5 жыл бұрын

#1 DON'T use a Zip tie for the Chain guard! It'll break off! Use a small hose clamp. #2 Use BLUE LOCKTITE on ALL NUTS AND BOLTS!!! Your Welcome

@savagesock3598 5 жыл бұрын

theone2be33 thank god, he should pin it so nobody gets hurt

@quintenkamphuis 5 жыл бұрын

You're welcome** You are welcome ;P

@quintenkamphuis 5 жыл бұрын

Also you could just use a better zip-tie.

@campbellpaul 7 жыл бұрын

Very good! Harbor Freight has some seamers that are well made but inexpensive. They make quick work of bending pliable brackets. Do you sell the link removal tool?

@Biminifisher 4 жыл бұрын

Great video! I have a white wire coming from motor. 50/50 chance of getting right. Does it go to blue or black? Thanks

@taje718 7 жыл бұрын

Can you make a list of the tools needed?

@buzzclark 9 жыл бұрын

Hi. I'm a paraplegic and use a wheelchair. I would love to do a build like this but I would have to start with something LOWER with THREE WHEELS. Kind of like a trike. Have you ever heard of this being done ??? and what are the chances of my success with this project ??? I'd greatly appreciate your info and advice if you are able to give it. Thank You. Sincerely, JAMES.

@JUST-UK-JAY 4 жыл бұрын

5 years and still waiting huh ? Damn i just subscribed too

@wyattcarey5166 4 жыл бұрын

Yes I have one but for a trike build I would recommend a 49cc 4 stroke engine if you want to ride in residential areas because near me they hate all my dirt bikes three wheelers and motorcycles etc.

@wyattcarey5166 4 жыл бұрын

Buzz Clark the 49cc 4 stroke kit has a pull start so you won’t have to pedal to start the engine

@wyattcarey5166 4 жыл бұрын

Curtis check my new comment

@maxkenee5457 4 жыл бұрын

you will need an electric front hub motor to kick it over

@ty123x Жыл бұрын

Thanks man I am not tool savey and this helped me understand my bike I was wondering what the little plastic part between the mortar and the exhaust was called

@naturallycurlymama5344 2 жыл бұрын

You did an excellent job

@backyardrestorations 3 жыл бұрын

I bought your stage 4 and I hate that sticker “this is made for racing” I tore that off and bought a 49cc sticker

@RainytheNB 3 жыл бұрын

That's to get around emissions laws, by classifying it as a racing part rather than a road vehicle part.

@2strokecarbtuningportingin187 2 жыл бұрын

kzfaq.info/love/PRPIP5uWB5cR8LgQq4qTDA

@jameselliott9397 5 жыл бұрын

I wish someone would design a brake caliper that would work with the chain drive sprocket.

@gutterfingers 4 жыл бұрын

Energy Nut grow up and do it yourself

@mwh82108 5 жыл бұрын

best video ive seen on this!

@magnoliamike 4 жыл бұрын

Great job brotha

@caedenkelso7803 Жыл бұрын

What is the fuel ratio? It doesn't say...

@nathanael5606 7 ай бұрын

Most agree around 35:1

@whnzr7047 2 ай бұрын

Some people also say 40:1 but do what you think is best.

@TanBoiIndustries Ай бұрын

32:1

@ARSZLB 3 жыл бұрын

Is this supposed to be some kind of joke…? Everyone knows that there isn’t a single person on earth who knows where their 10 mm socket is

@ih8hertz1 3 жыл бұрын

This post literally sent a shiver down my spine.....its always a 10

@jimlahey4219 3 жыл бұрын

I always know where my shit is

@ohioemeregncyresponsevehic3381 3 жыл бұрын

We went through 10, TEN sockets.

@DBCoop-bz4sl 3 жыл бұрын

It's almost like they're disposable. One use.

@robertstrohlin6051 2 жыл бұрын

Actually. I do. And I Horde those Shits Like Fuckin Diamonds. I have one simple rule. I don't lend out my tools... Period. Plus. I don't have kids... Soooo that's saving me a lot of heart ache...

@djminibikez 3 жыл бұрын

i got this same engine for my schwinn occ chopper, kinda had to modify a little bit

@neardood1 7 жыл бұрын

When I put my sprocket on the spokes I did it by taking the rear wheel off the bike, fitting the sprocket, plates, bolts, rubber ect loosely then refitting the wheel to the bike to do the alignment.I find if you attach something to the bike's rear frame near the sprocket (ideally a DTI gauge but lol I held the hammer against the frame) and rest it on the big sprocket so its just touching, then turning the wheel it will let you see how much the sprocket is out by and let you adjust it in both up and down and left and right directions until you have it done up right. The manual with mine said the tolerance is 1.5mm (but not in which direction?) which was easy enough to achieve.

@usdm_demio 8 жыл бұрын

I wiegh 315 I'm a big guy do you think this motor would pull me along bad?

@jubletyre1386 8 жыл бұрын

You will be fine I'm 260 and I've road a weaker engine at it its top speed

@grahamlopez6202 5 жыл бұрын

You'll be okay, but you'll look silly as hell

@ladinate9091 4 жыл бұрын

0:30 hahahaha I’m doing it on a bmx

@arablakba6988 3 жыл бұрын

Did it work

@ladinate9091 3 жыл бұрын

@@arablakba6988 yeah for 2-3 months then i rode it basically everyday i was adjusting the spark plug and snapped off the hook saving for a new plug and a pull start because the wheel size is 20 inches it has to be rolling down a hill to start

@robertpace3301 Жыл бұрын

Awesome video, what is the best NGK spark plug for the 80cc?

@bernieolivera5632 7 жыл бұрын

I agree with the comment about the tools used in this video but on the other hand compared to other videos I've seen this one is comprehensive and easy to understand. As I said in my last post this video saved me a lot of heartache. As far as the electrical there it's that much to it without getting into a technical explanation of how it all works. I personally just wanted to install the kit and get it running. So I would give this video an A minus which is still very good. Additionally FYI there is a lot of info on the internet on these motorized kits so spend some time and do some research before you get started.