How to install a BLOW OFF VALVE on an F30 BMW 335 N55 (Plug and Play Turbosmart Dual Port VR9)

Рет қаралды 193,955

4 жыл бұрын

Hey Everyone,
You asked.. so here it is! In today's video, we're going to show you how to add a PLUG AND PLAY Blow off valve, to your F30 335, with the N55 (same as the F32 435).
Here's a link to the one we installed in our car: www.kiesmotorsports.com/produ...
Here's a link to the plumb back version: www.kiesmotorsports.com/produ...
Here is a link to some helpful tools:
www.amazon.com/shop/kiesmotor...
Thanks for watching and please try everything at your own risk. If you’re interested in professional installation by Kies Motorsports, please click here: www.kiesmotorsports.com/pages...
ALSO, Scroll Down ⬇️ for:
🏎 BRYAN’s BUILD
📬 Kies Contact Info
📽 Kies Motorsports Video Playlists
🛠 Recommended Tools, Gear, and EXCLUSIVE Kies Partner Deals!
🌎 And More!
Bryan
Bryan Kiefer
President
Kies Motorsports, LLC
Hammonton, NJ
Info@kiesmotorsports.com
www.KiesMotorsports.com
Authorized Dealers and Installers of: ProTuningFreaks BootMod3, BimmerTech, AWE Tuning, Evolution Racewerks, CSF, Pure Turbos, Fuel-it, Studio RSR Roll Cages, MST Performance, Burger Motorsports, VRSF, Bilstein, H&R, Injen, Borla, Dinan, GoFastBits, Depo, VMR Wheels, BBS, Sparco, Snow Performance, Nitrous Express, AFE, Akrapovic, Eibach, Hawk, Fifteen52, Koni, KW, Seibon, Stop Tech, Vorsteiner, Wagner Tuning, Wilwood, and many more incredible brands!
🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎
BRYAN’s BUILD 👇🏼👇🏼
Click Here to see links to EVERY PART on Bryan’s Build! 👉🏼 www.kiesmotorsports.com/pages... 👈🏼
📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬
Contact:
Website: 🌎 www.kiesmotorsports.com 🌏
Contact: 📩 Info@kiesmotorsports.com 📩
Instagram: 📸 kiesmotorsp... 📸
Facebook: kiesmotorspo...
DRIVETRIBE: 🚔 drivetribe.com/t/SpEBj-8EQESm... 🚔
Twitter 🐦 KiesMotorsports?l... 🐦
📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽
Click below for Playlists of Kies Motorsports videos that will cover Performance, Aesthetics, Retrofits, and even Vlogs!
Click here for ALL of our Playlists!: 📽 bit.ly/KiesPlaylists 📽
🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠
Click here for Tools, Camera Gear, and Exclusive Partner Deals!
Tools, Camera Gear and More! www.amazon.com/shop/kiesmotor...
Exclusive Partner Deals: www.kiesmotorsports.com/pages...
🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰
Special announcement! ProAutoMotion is now a part of Kies Motorsports! Find all the ProAutoMotion products you love at www.kiesmotorsports.com

Пікірлер: 259

@JL-pq4rl 3 жыл бұрын

as soon as you said "we need to remove the water pump" I was like nah I dont need it lol

@VloggingWithDane 3 жыл бұрын

Lmao

@manperformance9253 3 жыл бұрын

Not hard bro

@superstarsfastcars 3 жыл бұрын

Exactly!!!! I was all in for an easy install. 😁

@dgaoimages7384 2 жыл бұрын

lmao

@Products233 2 жыл бұрын

But once you get passed the taping of the Allen screw 🤣 you’re all good brother

@Mike-Brewer Жыл бұрын

I'm over half way through this install and I could not have done it without this video. Thank you guys so much!

@801russc 4 жыл бұрын

Tips to make this easier. 1st: plan a weekend just in case. 2nd: remove the coolant and water pump, it makes it so much easier. 3rd: use an electric ratchet after you break all 3 loose with a normal ratchet, you can use a drill with a 90° attachment, I tried both. 4th: invest in a head lamp. 5th: after you get this or gfb installed and before you refill your coolant, now is a good time to replace the leaking oil thermostat housing gaskets. Just remember to have lots of rags placed just below both the oil cooler lines and and right above your alternator even if your drained your oil. Have fun and take breaks if you get frustrated.

@lloyd.8272 4 жыл бұрын

I took the intercooler out and the turbo inlet pipe and then removed the diverter valve. Whole install took a hour.

@manperformance9253 3 жыл бұрын

@@lloyd.8272 pretty easy especially on a rwd f30

@AlfaSixxx Жыл бұрын

I just did this yesterday on my RWD and it took me 6 hours from start to finish! That top bolt is definitely the biggest pain and took up most of the time re-installing due to the bulb shaped design of the Turbosmart DV. Removing it wasn't so bad from the stock DV due to its smaller shape and size. It is a job that I definitely do not want to be doing again! This video provided many wise and calming words when trying to fit that last bolt back in! :D Thank you!

@TommyLGarage 4 жыл бұрын

I Was certain I’d hate it. But I love it. Nicely done again !

@AmoDiaLZ 2 жыл бұрын

The cinematography and camera work is astounding on this channel

@andrewthompson6893 4 жыл бұрын

Props for using soothing music for a tricky/stressful install. Well done.

@WhoMeee 4 жыл бұрын

Thanks for all these amazing videos, huge help! Wish u continued success brother 💪

@lmc333 4 жыл бұрын

Bryan, you make it very hard to ignore your channel, happy 2020 buddy ! Cheers. Excellent presentation as usual !

@KiesMotorsports 4 жыл бұрын

Thanks! We're just getting warmed up :)

@WhatsyourForte 4 жыл бұрын

This video is right on time as I was looking at the GFB one. If you had to choose one sounds like you would go with the turbo smart one correct?

@ZillaFullBoost 4 жыл бұрын

I think most people go with a BOV for sound. Our stock DV sounds similar to this. This might be a few decibels louder. Turbo Smart does make good products though. I had it on my GTR. Thanks for the video.

@struger 4 жыл бұрын

Great video as always! I lov every of them. I just instaled gfb+ on mine so this one maybe spring time:)))

@denniscasasnovas2372 4 жыл бұрын

Crazy been watching your channel for a couple days trying to learn as much as I can. I just picked up at 2013 BMW 328Xi then noticed you’re in jersey as well will definitely meet up when you have your next event.

@cruzo1022 4 жыл бұрын

NJMOPAR what part of NJ? I’m in New Brunswick, I have a 2016 320i

@AnearHD 4 жыл бұрын

Like the way this sounds! I still prefer the Tial BOV for the N54 in terms of sounds but this sounds great too!

@frederickrushlow8297 4 жыл бұрын

I don’t even have an f30 and I love your videos.

@Project_4Play 4 жыл бұрын

Great video and detail how to get the job done

@TheKeenMechanic 4 жыл бұрын

Thank you for the good video

@abdielmaldonado3018 3 жыл бұрын

Great quality 🙏🏻

@TheWrenchLab 4 жыл бұрын

"Scale of 1-10... This is about a 38".🤣🤣🤣🤣 = Diverter valve top right bolt.

@pretread 4 жыл бұрын

As always a well prepared video.. with right detailed instructions ….good job… thanks man .. my stock diverter with DV+ was showing deterioration in holding boost and…..after a long research I could find turbosmart Kompact EM BOV VR9 Plumb Back only on your web site …..seems you are the first one to bring it to the attention of f30 n55 crowd…i tried to place an order through your web site but freight calculation with DHL was going wrong .. I live outside US… so I had to place the order direct with turbosmart….. keep enough stocks .. everyone with N55 F30 will order them soon

@jrgotswag88 4 жыл бұрын

you have the go fast bits upgrade?

@jhill92 4 жыл бұрын

Hey Brian, big fan here. Been watching your videos for some time now and until recently I really thought you were some guy from some big tuning part mailorder business. Your videos are great and I think what makes you special is that your explanations are very clear and on point and you seem to be an overall good guy! Now while watching this specific video, I couldn't help but wonder if it wouldn't be much easier to get there from above? You'd have to remove the intake and boost pipe, maybe move the coolant reservoir but then you'd have to have all kinds of room to operate, or am I missing something here? Would appreciate to hear your thoughts on this!

@dirtym3zy 4 жыл бұрын

Thats a sexy sound right there!

@johnungvarsky8875 4 жыл бұрын

Great job on the video, Bryan! Amazing as usual! When you installed the Turbosmart N55 Plumb Back (quieter) version on my car, I couldn’t figure out how you were going to video record your Dual Port model installation. It’s tight and difficult to see. You guys did a great job with the multiple cameras and editing. Plus starting the video out with showing the parts configuration on the bench really helped to visualize it. I probably have a better idea now after watching the video than when I was watching you install it live! It’s been over a month and the Turbosmart has been great! I really notice the lack of turbo lag and the power being much more available all the time than with the stock Diverter Valve. It’s obvious to me that the stock DV unnecessarily dumps too much boost and Turbosmart intelligently bleeds off just the excess boost. So the power is always available. My Plumb Back model has a subtle whippoorwill sound when I suddenly let up off the gas a bit. Pretty cool. Thanks again!

@KiesMotorsports 4 жыл бұрын

Thanks, John! It’s been a great upgrade, even over the GFB. I was nervous about the venting to atmosphere, but it’s been great 👍🏼 good find on these!

@johnungvarsky8875 4 жыл бұрын

Kies Motorsports I’m anxious to hear your Turbosmart Dual Port model in person at some point. Experimenting with the mic location was neat.

@superdiver. 4 жыл бұрын

You are like a bmw master tech.

@ryancaso 4 жыл бұрын

Awesome video! Any plan for the N26 engine in the future? What’s the sound like compared to something like an injen intake? Sounds similar in the video. Thanks.

@MrThePraye 4 жыл бұрын

Top quality content. I wish you are as switched on with using iPhone camera when doing interior upgrades like steering wheel trim and gear knob etc. you just let one camera run and say take this tiny bolt out and it’s here but actually if you could use your iPhone camera once in a while to show close ups, would be great. Just some feedback. Thanks again.

@aspire56 3 жыл бұрын

When me and my dad did this we got it in about 45 min we got so lucky with the last bolt. I’m just went in first try. Shout out to kies for the DIY tho

@JAydUBr6 3 жыл бұрын

Did you have a lift?

@01wizmiles01 4 жыл бұрын

great video like always. is there a bov for a f30 320d 2012. would love to put one on. thanks

@sfgamedevelopment 4 жыл бұрын

I have the go fast bits diverter valve with the pure turbo stage 2, and mine already sounds like this. Not sure if this would be any louder or if you would see any performance difference. Pretty interesting

@AlliKombat Жыл бұрын

BOV is plug & play, sounds easy but the actual task is such a pain in the ass. Thanks for remind me to send it to workshop instead of d.i.y. 😂

@carlospadilla6196 4 жыл бұрын

Can i do this for a 13’ 550i or are they really different? i would live to hear this from my turbos!

@luismartinez-ke2zw 4 жыл бұрын

do they have any for the S55

@brendanbowen9361 3 жыл бұрын

Will the install be easier since I'm doing a tic pipe and mst inlet at the same time? I imagine there will be a decent amount of room with those 2 pipes off the turbo.

@skyliner34gaming80 4 жыл бұрын

I have a m235i would this work for mine?

@hawhaw6957 4 жыл бұрын

Is it the same process for the 328?

@CarlosSTech 4 жыл бұрын

What about the s55 f80

@christianperles9780 4 жыл бұрын

Will they make one for the f8x?

@socommaster 4 жыл бұрын

You guys need to do a night vision retrofit

@chaoticend27 4 жыл бұрын

Yo yo Bryan! Will you be doing any X5 how to’s in the mere future?

@emresaglam5617 4 жыл бұрын

I love thatttttt!!!!

@emmanuelmillet4719 4 жыл бұрын

For a twin turbo you just need one valve or two ?

@BreezeLock 4 жыл бұрын

Any clue if this would fit on a Pure Stage 2? Would like to use this instead of a go fast bits when I upgrade soon if so

@TheShadow49085 3 жыл бұрын

Hey Brian, I’m looking into purchasing one of these bmw’s and I’m just curious, can you install this bov on one of these on a stock motor? I’m new and just trying to do research on these vehicles before I purchase

@Rick4345 4 жыл бұрын

It would be awesome if you could mount something like a ProClip holder to it instead of the magnet.

@clint.mendoza 3 жыл бұрын

This job is made 100x easier by removing the turbo inlet from the top and approaching it from top and bottom. The top-most bolt that you try to reach/screw in blindly from the bottom is actually much more accessible from the top. Especially given that the Turbosmart is bulkier than the GFB, doing from the top makes it much easier.

@customcarcare5919 2 жыл бұрын

You can’t remove the turbo inlet from the top? And from the bottom it’s even harder to remove than the BOV itself?

@raulmartinez3484 Жыл бұрын

@@customcarcare5919 You can remove the turbo inlet from the top. It's the only way to do it. But in order to remove the turbo inlet you must remove the air filter.

@lucian_7588 Жыл бұрын

This is what I’ll be doing! Need to replace my turbo inlet anyway!

@200mphBrian 4 жыл бұрын

Do they make this for the 2015 650

@razorzai3508 4 жыл бұрын

I installed CTS turbo BOV on my F30 n20 and get the stutututu sound

@beeweezee71888 4 жыл бұрын

I wish they would create one for the N20 engine f30 328i.

@kennkart 4 жыл бұрын

Dear kies motorsport. I have a question. Whats the part number for bov n20 engine? I have the 2013 528i n20.

@Suldusk 4 жыл бұрын

Hey Bryan I've noticed that almost all LCIs have that flutter instead of whoosh. Almost all Bxx engines. Does this mean on a BXX engine it's going to flutter?

@andresmarcos9590 4 жыл бұрын

Do you happen to have one for the 328i

@jack.f30 4 жыл бұрын

My car sounds like this already and it has the stock diverter? Is that normal I think most of the sound is coming from the air intake tho...

@amarchmike 2 жыл бұрын

If you have the sound like this with the stock part, please check your lower part of intake pipe. It's probably not stick to the Turbo properly. I had that issue before :D

@timjcrowley 4 жыл бұрын

Brian, I have a question regarding Coding of 2016 BMW328i Xdrive. I would like to get tail (stop) lights to Blink. I have coded FEM, REM and (2) items in Expert 3062. Anything else in 3062 or 3063? Thank You. Tim

@jrposadas1988 4 жыл бұрын

Hey Brian, will this fit a 2018 BMW M3 F80? Also whats the link for this part of it does?

@eliesherpenalvert8394 3 жыл бұрын

It’s that fits on my 2013 335i ActiveHybrid 3 ?

@seldinkorkutovic6481 4 жыл бұрын

Did you have any problems with it after the install like with the turbo?

@raularce63 4 жыл бұрын

Would this work for N55e e92?

@josephfilipiak3331 2 жыл бұрын

If the oem diverter valve is plumb back don’t you need to watch the mounting orientation of the Turbosmart? If it dumps completely atmospherically you’re gonna have mass air flow issues right?

@STORM_1800 2 жыл бұрын

Did the level difficulty increase because it’s a x drive or is it the same for the rwd models ?

@jollymarv752 4 жыл бұрын

What are the difference between the one in the video and the plumb black?

@TK-jj9xr 2 жыл бұрын

I'm having overboost issues using a gfb plus on my e92 n55 during canyon drives, do you guys thinks that may help? Thanks!!

@EldridgeCortes 4 жыл бұрын

yeahhh...im going to need this soon enough lol

@_f30_b58 4 жыл бұрын

Eldridge Cortes once you get it installed, I’m going to need a ride in your 335i.

@craeftig2617 4 жыл бұрын

When is this going to be available for the n26?

@Phillibilli 4 жыл бұрын

There is no problem with the air mass sensor? Checked the Lambda Values?

@xZen0sx 4 жыл бұрын

Thanks for the video Bryan! What would be the cost for installation?

@oceancity5776 4 жыл бұрын

A Lung

@ThisDudePaul 3 жыл бұрын

Is is the same procedure for b48?

@jamesmccallion4526 3 жыл бұрын

can you do this for n20

@officiallopez2334 3 жыл бұрын

Does this work on the n20 engine? Since the diverter valve works on the n20? Or am I wrong?

@fluffyosj10 4 ай бұрын

Do you have installation video for N20 engine??? :D

@sovannasaknak5559 4 жыл бұрын

Will this BOV fit my 2017 F25 M-sport?

@DocTango 3 жыл бұрын

Is this BOV only for the F30 or can it be installed on any N55 motor? I just bought an m235i (my first BMW) and I'm pretty sure it has an N55 in it.

@brysiaczek9876 4 жыл бұрын

Will this work on 430d?

@ryanmichalak7508 3 жыл бұрын

whats the difference between the normal and the plumb back version??

@samh1132 4 жыл бұрын

Would this go on the n55 135i ?

@sttm1283 4 жыл бұрын

you drove around with the same shirt and hat for a week? :D

@crism515 2 жыл бұрын

what camera/lens do you film with?

@justanotherguy9980 3 жыл бұрын

how much easier is this if I remove my turbo inlet pipe?

@kennkart 4 жыл бұрын

Will this work on my f10 n20?

@spussego 2 жыл бұрын

wouldn't it have been easier to do if you removed the inlet pipe as well?

@mikedaguio5436 3 жыл бұрын

is there one for a f30 328i sport line?

@gen13pinoy 4 жыл бұрын

Is there one for n20/26?

@ogbake4546 4 жыл бұрын

Will this work on 2016 328xi

@bjornsune903 3 жыл бұрын

Does this work with the N20 engines?

@explorewithzeshan 4 жыл бұрын

Where I can buy that?

@bizzy 2 жыл бұрын

GFB & Turbosmart , some facing shadoww code of DV close jam. is it normal? turbosmart maybe can be ignore as it a whole system. but how about GFB because it still rely on stock module?

@Darkeiser.7 4 жыл бұрын

Soooo, this should work for the E92 335i n55 right??

@LateTakahashi 3 жыл бұрын

Any re-tune required after changing BOV? I've been hearing alot from my circle of friends that a retune is needed when the current BOV is replaced with another make's.

@SeanMichaels23 2 жыл бұрын

Were you friends getting a code after the install of the BOV? If so what code ?

@kiyan110 4 жыл бұрын

E90 N55 too??

@yeisonmunera8701 2 жыл бұрын

Question i want to install this mod to my bmw x5 e70 35i 2012 n55 stock engine will this blow off valve cause any problems to the engine or turbo over time?