How to Install a complete floor pan - 1964 Impala SS restoration Part 7 DIY Auto Restoration

Рет қаралды 35,113

Guzzi Fabrication - D.I.Y Auto Restoration

Жыл бұрын

SHOP INFORMATION :
Contact us at : guzzifabrication@yahoo.com
Our Address is: Guzzi Fabrication
3206 Main St Suite 106
Rowlett Tx 75088
Check out my other videos in our KZfaq playlist page: www.youtube.com/@guzzifabrica...
Honesty - Quality - Craftsmanship
What We Do : Rust / Collision Repair
Metal Fabrication - Steel - Aluminum - Stainless
Complete Chassis / Aftermarket Chassis - Front & Rear Installation
Frame Fabrication / Straightening
Drive Train ( OEM / Custom )
Wiring
HVAC
Resto Mod
4X4
Street Rod
Hot Rod
Custom
Antique
Speed Shop
DIY Auto Restoration
Over 20 Industry Certifications on Display:
Current AWS Welding Certs
I-Car Collision certifications
PPG Paint Certifications
OSHA - 10 Certification
NCS NESHAP Certification
EPA Compliance
Blacksmithing Certificate
Eastfield College
profile.php?...
Google search : guzzi fabrication rowlett tx - To check out our reviews

Пікірлер: 156

@Freebird67 6 ай бұрын

Thanks rob UK follower

@guzzifabrication3448 6 ай бұрын

That's so awesome !!! Greeting from the U.S.

@joeh1657 11 ай бұрын

That's a good repair

@guzzifabrication3448 11 ай бұрын

Thanks !

@peterjimenez3795 4 ай бұрын

Great work.....your the man👍👍👍

@isaaccontreras7464 6 ай бұрын

Clean job

@guzzifabrication3448 6 ай бұрын

Thank you Sir !

@pmd7771969 10 ай бұрын

This guy did the best correct repair I've ever seen. Take a bow

@guzzifabrication3448 10 ай бұрын

Thanks !

@user-xr4xt8tg4y 6 ай бұрын

Good video a lot of knowledge you have thanks for sharing 👍

@guzzifabrication3448 6 ай бұрын

Glad to pass it on thanks for watching

@bmw171 11 ай бұрын

That’s some real nice work!

@guzzifabrication3448 11 ай бұрын

Thank you Sir !

@mr_svetozar Жыл бұрын

Very cool! Thanks for video!

@guzzifabrication3448 Жыл бұрын

Thank you for watching !

@tabletkitel7137 Жыл бұрын

Loved this video from Hungary. I bought a Moszkvics (a car from the soviet times) and i restoring them in the near future.

@guzzifabrication3448 Жыл бұрын

THat's awesome, I don't know if they were in Hungary, but I've always wanted a Lada.

@tabletkitel7137 Жыл бұрын

Lada was made in the soviet era too. The Lada and Moszkvics has one or two same parts like carburator and some other stuff. The Lada made after the Fiat 125. The russians bought the licence the fiat 125 and he make his own. In the soviet time Hungary is the part of the Soviet union so you can buy eastern car. My family had a moszkvics 2140 car and we sell it around 2005 os 2006 maybe.

@guzzifabrication3448 Жыл бұрын

@@tabletkitel7137 A lada body on a modified s-10 chassis with superchared v6 or v8 5 speed would be outside of the box ! Thanks for watching my channel !

@ehand1015 4 ай бұрын

Great video. I’m just starting to remove/replace the floor pan on my 85 CJ7. This was a big help, thank you.

@guzzifabrication3448 3 ай бұрын

Thank you Sir !

@slipsonic809 10 ай бұрын

I'm building my 64 similar to this one, and every time I'm about to take a shortcut, I tell myself what you said... Yeah I know nobody is ever gonna know, but I'LL know. When I'm all done I want to know I did everything right to the best of my ability. Love it!

@guzzifabrication3448 10 ай бұрын

That's awesome ! Years later when it's all over you look back and you'll be really happy you didn't take any shortcuts. Thanks !

@ramblerguy Жыл бұрын

Real nice work.

@guzzifabrication3448 Жыл бұрын

Thank you Sir !!

@speedcitycycle 11 ай бұрын

Nice work!

@guzzifabrication3448 11 ай бұрын

Thank you Sir !

@plisken8799 Жыл бұрын

Very nice work

@guzzifabrication3448 Жыл бұрын

That's awesome thank you !!

@williamperry9006 Жыл бұрын

I like your work. I like how you work on places that are not going to be seen, you treat them like they will be seen because you know how the peice is treated correctly.

@guzzifabrication3448 Жыл бұрын

That's how I grew up, it was expected. Thanks for watching !

@TheRealMisterChopShop Жыл бұрын

Skills❤

@guzzifabrication3448 Жыл бұрын

Just hard work....

@grandchamp7783 Жыл бұрын

No matter what channel or who I'm watching do metal work,I'm still fascinated by the work these guys can do!! Can watch this stuff all day!! Great job!!👍

@guzzifabrication3448 Жыл бұрын

Thanks !!

@user-lj7fz6zn5q Жыл бұрын

Nice work 😊

@guzzifabrication3448 Жыл бұрын

Thank you !

@miltoncostakis799 Жыл бұрын

I enjoyed this video and your craftsmanship! It’s great to see someone taking pride in their work.

@guzzifabrication3448 Жыл бұрын

There is only one way to do a job..... the right way.... Thanks Milton !!!

@gibsonexplorer8777 6 ай бұрын

Another excellent job you videos are so clear and your welding and finishing are perfect I have been learning a lot thanks for these video's they are really good!

@guzzifabrication3448 6 ай бұрын

Awesome ! thanks for supporting the channel !

@billsimpson2392 Жыл бұрын

Now that's "Workmenship" 👍👍

@guzzifabrication3448 Жыл бұрын

Thanks !!!

@dayomashamilton100 Жыл бұрын

Can’t wait to drop my 64 Impala off to you!!!

@guzzifabrication3448 Жыл бұрын

Getting geared up for that ! I'm glad you have your parts ! that is a real problem now... Take care, see you soon.

@G_Rapids Жыл бұрын

Finally! Someone who shows the process, been trying to find help for doing this to my 63 galaxie, just what i needed.

@guzzifabrication3448 Жыл бұрын

I have 160 videos out you should be able to find whatever you need hey thanks for watching

@G_Rapids Жыл бұрын

@@guzzifabrication3448 I will be sure to check them out. This video helped me tackle the sides of my floor pan, but how are the front and rear usually held in? Also spot welds? I am trying to wire wheel down to see but i am not seeing any that are obvious like the sides had

@guzzifabrication3448 Жыл бұрын

@G Rapids the panel's front and rear will be held in place with resistance Welds

@rescuedandrestoredgarage Жыл бұрын

Brother, your videos and information is so awesome, and I am so looking forward to applying your knowledge to my 62 impala. You rock brother ty so much.

@guzzifabrication3448 Жыл бұрын

Awesome !

@SpankysHotRodsandCustoms Жыл бұрын

Just found your channel. I’m building a 61 Impala on my channel now.

@guzzifabrication3448 Жыл бұрын

Nice !

@TheRealMisterChopShop Жыл бұрын

The quality of work you got a love it❤

@guzzifabrication3448 Жыл бұрын

Thanks brother !

@FrisellFan01 Жыл бұрын

Your work is exceptional......from that inside rocker patch to the entire floor pan....

@guzzifabrication3448 Жыл бұрын

Thank you Mr. Fisher !!

@phildoleebowitz5335 9 ай бұрын

Man you make it look so simple, a true craftsman, i enjoy all your videos

@guzzifabrication3448 9 ай бұрын

Thank you Sir !

@jorgeeusquiano5686 Жыл бұрын

Keep the videos coming bro great work you do

@guzzifabrication3448 Жыл бұрын

Thank you Mr. Eusquiano !

@Ed.Barajas Жыл бұрын

Mad respect for you brotha been learning a lot from you. Can’t wait to start working on both my 64 impalas

@guzzifabrication3448 Жыл бұрын

Get on them Impalas ! Thanks for watching !

@greasemonkey1880 9 ай бұрын

Always nice to see it done right rather than butchering and covering with filler 👍

@guzzifabrication3448 9 ай бұрын

Yes Sir !

@mrpurcountry Жыл бұрын

Always a great video, and excellent work.

@guzzifabrication3448 Жыл бұрын

Thank you ! and thanks for following the channel !

@williamperry9006 Жыл бұрын

Your work is impeccable.

@guzzifabrication3448 Жыл бұрын

Thank you Mr. Perry !

@miguelvaldez9449 Жыл бұрын

Make it look easy!!

@guzzifabrication3448 Жыл бұрын

Thank you Mr. Valdez

@shadowrockcairns8390 5 ай бұрын

Amazing job!!!

@guzzifabrication3448 5 ай бұрын

Thanks !

@EarlyIronAddict427 10 ай бұрын

Really nice job man. Thx for the tips and techniques and for sharing this with us all. 👍🏻✌🏻

@guzzifabrication3448 10 ай бұрын

Thank you for supporting the channel !

@jonathanvidal3073 Жыл бұрын

Another great video. Wow that's a lot of work.

@guzzifabrication3448 Жыл бұрын

Yes Sir it is. Thanks for watching !

@WILODSM Жыл бұрын

Those spot welds look great 👌🏾👌🏾👌🏾

@guzzifabrication3448 Жыл бұрын

Thank you !!

@FrisellFan01 Жыл бұрын

This patch was beautiful!

@guzzifabrication3448 Жыл бұрын

Thank you Mr. Fisher !

@grey1wa 2 ай бұрын

Dude it looks better than stock... I'm trying to learn/gain confidence in doing my first full restoration on a 1974 Camaro.. and need to replace the floor pan and a bunch of rust repair (found it in a field)

@guzzifabrication3448 2 ай бұрын

Thanks !! I have several floor installation videos.

@grey1wa 2 ай бұрын

@@guzzifabrication3448 I subscribed you make it look easy

@guzzifabrication3448 2 ай бұрын

@@grey1wa Thanks !!!

@hansgruber6543 7 ай бұрын

Awesome video! I’m doing a whole pan on a 66 C10. Bit of a different setup but overall some good lessons learned. All my inner and outer rockers and all that was gone. Gonna be fun!

@guzzifabrication3448 7 ай бұрын

Hey thanks for watching ! I know you can handle the C10, it will turn out great

@giuanai1238 Жыл бұрын

Awesome video. Thanks for being a great resource. In one of your past videos you showed us how to use a tig welder to do a spot weld. I am curious why you didn’t use that approach with the floor pan? If it could be possible the need for all of those punched holes would not be needed. Would like your feedback.

@gorgonbazil2652 Жыл бұрын

Nice Job on that floor pan.. I would not really worry about dimples from the clamps, seems the sheet metal from the factory around the welds looked like that anyway!

@guzzifabrication3448 Жыл бұрын

Thanks for watching !

@JimmyMakingitwork Жыл бұрын

Nice work, came out great! I'd let you help on my 62 C10 project anytime! ;)

@midwest5989 Жыл бұрын

Hope to do this someday with my 59. Learning is occurring!

@guzzifabrication3448 Жыл бұрын

59's are sooooo cool!!

@leechristo6263 Жыл бұрын

I love your work! 👌🏽

@guzzifabrication3448 Жыл бұрын

Thank you for watching the video and thank you for the comment !!

@domenickpace3450 Жыл бұрын

Nice work ..What welder are u using?

@guzzifabrication3448 Жыл бұрын

@@domenickpace3450 Lincoln 256

@johnkelly6942 Жыл бұрын

I’m going to call it a nice repair, too!

@guzzifabrication3448 Жыл бұрын

It worked out well. Thanks for following the channel !

@raulayon9224 Жыл бұрын

😃👍

@guzzifabrication3448 Жыл бұрын

Thank you !

@angelsanchez2845 Жыл бұрын

Outstanding work brother, im thinking of taking my car to your shop

@guzzifabrication3448 Жыл бұрын

Great.

@arod273 Жыл бұрын

Outstanding craftsmanship sir, I subscribed and have been watching the vids. Great job brother, keep ‘em coming. What grinding wheel are you using on the high speed grinder? I’ve seen you use it a lot to knock the welds down. Also, are you welding on the POR 15? Thanks for sharing!

@guzzifabrication3448 Жыл бұрын

Thanks ! that is a 3m green corp 3/8 grinding disc Thanks for watching !

@ChristopherL0rtiz Жыл бұрын

👍✊

@guzzifabrication3448 Жыл бұрын

Thank you for always supporting the channel !

@HiptonismHD Ай бұрын

Man I wish my car was this clean.. Not even sure it's worth saving. 😬 The worst part is I've never touched a welder, not sure I'd be able to do it

@guzzifabrication3448 Ай бұрын

I believe in you, you can do it !

@lynnmackenzie9501 Жыл бұрын

That 64 is what is known as a Canadian basket case. Every joint has rot.

@Mongonader 9 ай бұрын

Thank you for taking the time to make this video I’m actually going through the same process on my 63…. Do you prefer the dual action sander vs a high speed for finishing.. or is that what u just happen to have on hand. Thxs again

@alc3712 Жыл бұрын

Nice work. Why didnt you use the spot welder on the front edge at the firewall?

@guzzifabrication3448 Жыл бұрын

Didn't think about that...... next time.

@SJ-qu6lv Жыл бұрын

Just found your channel. I had a 70 GS455 4 speed car….wish I still had, but my 71 442 survived. I am getting ready to do those pans. Great video. One question: do you tack, and retail, to the point of a continuous bead when done? Thanks.

@guzzifabrication3448 10 ай бұрын

Depending on which part your adressing, usually no, I did on the frame rail but not the pan.

@Frankensteinfabrications Жыл бұрын

just a quick question would it have been better to spray the por 15 all the way down the rockers ? Also where do you get those magnets ? Ive never seen those thank you awsome work

@guzzifabrication3448 Жыл бұрын

The magnets are from strong hand tools. Thanks for watching !

@steelyerface21 Жыл бұрын

great video, as far as the self tappers to hold down some areas, did you take that out and then plug weld the hole? since it is a through and through hole do you need to back the hole with brass to be able to fill it if you are filling it or how do you manage those holes if you remove the screws after things are tacked? thanks @Guzzi Fabrication

@guzzifabrication3448 Жыл бұрын

The screws are removed in the holes welded

@ericj1380 2 ай бұрын

Great video Robert, hey I’m curious…how many hours does something like this take?

@guzzifabrication3448 2 ай бұрын

Every vehicle is different.....

@andyvitale6071 14 күн бұрын

Great job , very informative. What kind of cutting wheel do you use.

@guzzifabrication3448 14 күн бұрын

Thanks ! I think that cutoff wheel is a Avanti 7 "

@andyvitale6071 14 күн бұрын

@@guzzifabrication3448 thanks I'm also a new subscriber.

@guzzifabrication3448 14 күн бұрын

@@andyvitale6071 that's awesome !

@chrisfreeman8175 3 ай бұрын

Well my car still bolted on the frame could I do what I need to do

@DYFEA 11 ай бұрын

Was that floorboard already coated when you got it? I need to coat mine and I see people use all different coatings but I'm thinking I'll use either por or kbs. Is that primer or por?

@guzzifabrication3448 11 ай бұрын

That one came with the EDP coat, I see they are selling body panels now just raw steel..... bad idea... the problem with that is how to you coat in between sandwiched/welded parts?? P.O.R is good.

@DYFEA 11 ай бұрын

@@guzzifabrication3448 exactly! Shockingly my 1962 hearse had bare unprimed steel under the floor and in the supports, I'm shocked they still exist at all. Thanks for the input!

@chrisfreeman8175 3 ай бұрын

Did you need to weld any braces inside the body are that’s just over kill

@guzzifabrication3448 3 ай бұрын

The vehicle is secured to a frame fixture.... bracing inside would be a real pain to work around and are totally unecessary ( unecessary as long as the body is on the fixture )

@user-px8fr6ru2x 4 ай бұрын

Great video but ? Please shouldnt you weld braces in door jambs and from left to right to keep body aligned...thx

@guzzifabrication3448 4 ай бұрын

Nope... that's why it's on a frame fixture.....

@87lerma 6 ай бұрын

What gauge metal do you buy when doing sheet metal work?

@guzzifabrication3448 6 ай бұрын

18 guage is standard

@bradswan2656 21 күн бұрын

How much would a job like this cost?

@guzzifabrication3448 21 күн бұрын

I work on an hourly rate, too many variables to throw out $ amounts without assessing the vehicle to be worked on.

@pjlss454 Жыл бұрын

It's best to install a full floor pan with new bushings to the frame first after prepping all areas. That way you can make sure of the total fitment of the pan and it's bushings to the frame. Also it's easier then to lower the body onto the frame from above. I use my ceiling lift points daily for that.

@guzzifabrication3448 Жыл бұрын

If you are not confident in your measuring skills.... then yes you probably should stick with your method....

@pjlss454 Жыл бұрын

I don't need videos to boost my ego, apparently you do. 47 years in doing restorations is enough satisfaction for me.

@guzzifabrication3448 Жыл бұрын

@@pjlss454 If you have 47 years experience why are you watching how to videos? I figured as much......

@jonathanvidal3073 Жыл бұрын

@@pjlss454 So yeah, why are you watching how to videos?? You could probably learn something from this guy.

@phooesnax 3 ай бұрын

How sharpwhat is geometry of chisel edge?

@guzzifabrication3448 3 ай бұрын

I will try to do a video coming up on that method with that chisel.

@notpoliticallycorrect618 11 ай бұрын

Hello were are you located ?I'm in need of help looking for someone as your self to fix my undercarriage rusted out very bad I'm in Los Angeles ca if your not available do you know of anyone?

@guzzifabrication3448 10 ай бұрын

I am located in Rowlett Tx.

@onthegrindtv5363 8 ай бұрын

what brand floor dynacorn?

@guzzifabrication3448 8 ай бұрын

I believe they came from Classic Industries whatever brand they carry that was a few years ago

@onthegrindtv5363 8 ай бұрын

ok thanks@@guzzifabrication3448

@guzzifabrication3448 8 ай бұрын

@@onthegrindtv5363 anytime

@hectorbanuelos4744 Жыл бұрын

The car should have been acid dipped and cleansed with other chemicals prior to metal work and metal prep.

@guzzifabrication3448 Жыл бұрын

That is what everyone who has never had any experience with acid dipping cars say......

@josedelao9124 2 ай бұрын

You never sand blast you areas when replaceing panels wire wheels don't clean the surface sand blasting gets the rust out of the poars in the metal what up with that being so professional.

@pmd7771969 10 ай бұрын

Hacked up cars suck