We are going over the steps to install a "Factory Look" dash camera for a 2021 Ford Mustang GT. This is a very quick and easy installation; however, this is for the front camera install only.
Compatible with Ford Mustang 2019-2023 Premium GT, Premium Ecoboost, Mach 1, Shelby GT500, Shelby GT350, and Bullitt.
1. Unboxing - 0:01
2. Step 1 (Remove Battery Cover Retaining Clips) - 0:48
3. Step 2 (Remove Battery Cover) - 1:01
4. Step 3 (Remove Negative Terminal) - 1:11
5. Step 4 (Remove IPMA Cover) - 1:31
6. Step 5 (Swap IPMA Cover Bumpers) - 2:12
7. Step 6 (Swap IPMA Cover Retaining Clips) - 2:38
8. Step 7 (Disconnect Rain Sensor Plug) - 3:43
9. Step 8 (Connect Dash Cam Cable) - 3:57
10. Step 9 (Reconnect Rain Sensor Plug) - 4:11
11. Step 10 (Install Dash Cam/IPMA Cover) - 4:21
12. Step 11 (Install Negative Terminal) - 5:03
13. Step 12 (Install Battery Cover) - 5:21
14. Step 13 (Install Battery Cover Retaining Clips) - 5:34
15. Test Run - 6:17
Products Used:
This video contains affiliate links for which I may receive compensation.
Fitcamx 4K Dash Cam - amzn.to/3F55N18
Trim Removal Tool Set - amzn.to/3Q2C3r5
Tools:
1/4" Socket Wrench
10mm Socket
Flathead Screwdrivers
Trim Removal Tool Set
Disclaimer: Content produced from Mcgurr Entertainment is for entertainment purposes only. This information is not endorsed by any agency/company (such as Ford) and is intended as an entertainment. Mcgurr Entertainment assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All content on KZfaq is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on KZfaq. Use this information at your own risk.
#Fitcamx #DashCam #Mustangs