I have have done all the electrical connections in my house myself, thanks mostly to your videos. Now I'm going to install a day/night switch, thanks to this video.

This saved me such a headache! Thank you. I am not an electrician. Did pretty well with circuitry in school. But understanding household wiring has always been challenging for me and the instructions with this day/night switch were pretty useless. After day one of trying to figure it out myself, I watched this and had it done chop-chop on day 2 ;)

Thanks, boet, ek double check altyd voor ek met krag speel. Goeie video, mooi verduidelik en tot die punt. Baie dankie!

I love every practical display, you guys are amazing ❤😮

Thank you for video

My uncle asked me to install it for him. Am gonna use same method👌👌👌

The whole idea of watching the video was to see the position of the lux switch after you have adjusted it.

Thanks for this video. Helped me figure out how the load worked. The diagram didn't help me much 👍🏽

Thank you for your help... Now with this loadshading how can one add an inverter to my db for battery back up? So my lights and least my TV stay on right through loadshading

What a magnificent explanation Thank you engineer for ur time

Thanks, very informative and clear instructions.

Excellent, clear instructions 👌

Thanks for a practical concise explanation and installation. As a rookie DIY your video is very helpful. BTW love the pigeons sound in the background.

Excellent instructions, thank you so much buddy

Excellent explanation!

Brilliant, thanks excellent instructions.

Thank you very much for explaining 😊

Thank you for sharing! You have been very helpful.

Thank you. That helped a lot.

Brilliant, thank you.

Thanks. Great help!

excellent video.thank u

Thank you!

thank you very helpful

Thank you amazing work.

you are good sir

Very well explained video thanks

Thanks for a good explanation

thanks so much ,,, l do really appreciate ...

Awesome video. Thanks Bud

Great video

This video was very helpful🙏🙏🙏

Thank you very much 😀

Good thank you for reaching me

Lekker man, lekker

I like way you call insulation (jacket) thanks now I know you need two lives other must be able to energized daylight other one must be able to energized spot light then nautratl must be connect together as youR return

so interesting make everything simple

That bottom sprag doesn’t fit into the gland seal so rain water will get in

Excellent 💪💪💪

Excellent

Hi. Out of curiosity. Can you run the live wire on the load out side of the sensor. What i want to do is run a normal on and off switch as well as the sensor together. I'm worried about Live running backwards in the circuit and damaging the sensor as current isn't meant to run into the load out port.

Great size

Saved me a couple of Rands, thank you.

Why use a conduit box and not a junction box

That 3 way is gona take water then short out and trip.The thinner sprague should go over the 3 way inlet

Where do you locate the day/night sensor switch?

Assemble an adjustable night sensor for the lamp Where to buy such a sensor in Ivy or online I did not find a sensor Thanks

You just earned a new subscriber! Quick question: can I connect multiple 10w/20w floodlights to one day/night sensor like this?

Hi There, thanks for your good instructions, I just need to know if there is any way to adjust the sensitivity of the photocell my photocell is about your the same type of what you showed on your video, but it activates when it is cloudy and stays on for all day and night, and I need to make it so it can only activate or turn the light on when it is absolutely dark, thanks in advance.

If you don't have some silicon, you can use cable ties on your spauge

Hi I'm based in Gauteng. Where can I get this day and night switch. This is awesome and exactly what I've been looking for

Hi. I am struggling with the wiring of my day night switch. Can I email you? Thanks.

Just differentiate between live wire and( live returner)that also help

At least you improved the cowboy installation the previous installer did the cctv wire instal looks like a child did it.

Skitterend. Thanks

My day night switch is not turning the lights off in the morning...what can I do

How do install for example up to 10 bulbs using an AC contactor in the circuit?

So you run one neutral wire to the sensor And connect all three neutral ends at the bottom into at the junction box

How to adjust sensitivity if was dark and the light does not turned onn ??

Hi....quick question if the sensor is not working for some reason ...will the lights not come on at all? And how will I detect if that is the problem?

Something is confusing me. You indicate 2 Live wires into the sensor, yet the diagram on the sensor indicates Looping the Load & the Neutral. To my mind, you then only need a Live Line and a neutral into the sensor. Why the confusion of the additional live line into the sensor? In Effect, the sensor breaks the power-in line to the light. The lack of light then causes the sensor to close switching the light on. Does feeding 2 live lines in, not actually cause a possible shorting action? How can I post my circuit diagram, for your advice? Please advise. Angus.

Hi, does your led flood light need to be earthed?

that strange why was the supply wire going to the light to begin with?

A photocell for 250w fitting its how many amp

I have all my lights run on one line. How can I connect this photocell without having exposed wires because my light switch to turn on all lights is in the house

If snow falls, this setup wouldn’t work.. needs to be done somewhere under the roof

What type of cable / wire would you recommend for lights? Is the flag twin and earth from builders warehouse okay? It's around R290 for 20m.

Rough workmanship that install.

No black tape is used !!!

How many MOA photocell for 250 words

I did this exact writing before watching this video and it was tripping. Watched the video to confirm if I'm right or wrong then I thought let me retry all connections Did that and bam it worked I still dont know exactly why it was tripping all the time maybe I had a neutral connected where it shouldnt.🤔

Doesn't matter how I install the LED lights down go on

All that poorly fitted trunking, would let water in, it is best to use the correct outdoor fittings for this kind of work and not the ones shown here.

Talk colours please

wecome to use our photocontrol (shanghai longjoin) any problem, pls feel free to contact us wally@longjoin.com)

Wow that is the roughest work I've ever seen. Twisting wires together and no tape or sheathing over it?? Someone is Gunna get hurt eventually!

Don't be quectly

Waste video.. demo the product by sunset and sunraise...