How to Install a Jet Kit on a Suzuki DR650 [BUY-BUILD-RIDE]

Рет қаралды 27,154

Күн бұрын

EP01 Installing a Jet Kit on a Suzuki DR650
In this video we show you how you can install a Jet Kit. In this case we did it on our 1995 Suzuki DR650, but the principles can be applied to other applications as well.
Here's where we purchased our kit from - procycle.us/bikepages/dr650.html
(This video was not sponsored by Procycle)
Have any questions? Drop a comment below and we'll make sure to answer it the best we can.
Make sure to check back for more videos of Buying, Building and Riding Motorcycles. And we suggest you get out there and do the same.
Camera Equipment:
Panasonic Lumix GH4: amzn.to/2ycdctO
Rokinon 14mm F/2.8 Ultra Wide Lens: amzn.to/2gr5tPD
GoPro Hero Session: amazon link - amzn.to/2g7tJJv
Ebay link - rover.ebay.com/rover/1/711-53...
DJI Mavic Pro: amzn.to/2gpWfTy
DJI Mavic Pro Battery: amzn.to/2yci1DG

Пікірлер: 36

@andrewevans7184 5 жыл бұрын

You guys obviously know about bikes now you just have to spend some more time on the camera work.

@ralphderkapitaen9875 4 жыл бұрын

yeah, the constant blurry and out of focus, and back to focus and out of focus again, that makes your stomach sick..:-) otherwise, good video

@LotusJones 6 жыл бұрын

Thanks. Very informative. Love the little detailed comments, eg: using a JIS screwdriver or getting the air/fuel mixture needle extra clean before reassembly. If I may make one critique: the in/out of focus camera work was nauseating. Maybe a new camera or holding the subject still would help. Nevertheless, great job!

@BuyBuildRide 5 жыл бұрын

Thanks for the feedback! Unfortunately we had just picked up a new lense that was giving us issues. Fortunately we have remedied it for future episodes

@whois_jude 4 жыл бұрын

Nice focusing.

@charlesmattina3787 6 жыл бұрын

Love having a motorbike instructional video without super loud metal or dance music in the backgound. Good choice on the genre and volume. Though I do agree with other posters that the camera work got a little uncomfortable. Either way, keep up the good work and you guys will get popularz.

@BuyBuildRide 5 жыл бұрын

It wasn't the best time to try a new camera lenses. And I agree on the crazy music, doesn't help someone concentrate on the work at hand.

@roy993 Жыл бұрын

Amazing video. I have a hard time finding a video on how to install electric starter on my Suzuki dr 650 1994. Can you guys help me out, do you know all the parts I need for this conversion, and how would this work with the decompression valve? Can you direct me to where I can find this information? Keep on the great work! God bless

@JahTheOne9 4 жыл бұрын

Great video. I personally like the camera view, it's different to other channels. Don't see what other people are complaining about

@brandondugan1940 2 жыл бұрын

The focus breathing is just real bad. Up close and personal part is a good thing but consistently going out of focus is not so much

@sheepdog819 3 жыл бұрын

Stupid question; does the kit tell you what jets to use for each mod? I plan on doing a DG slip on and K&N filter.

@kristinacagy 3 жыл бұрын

beatifull video thankyou ....i just got drunk wth the focus up and down

@redsquarejay 3 жыл бұрын

Float o-rings? I didn’t see this step

@dirkgall4630 5 жыл бұрын

I have a 1999 Suzuki 650 DR motorcycle and I had not ran the bike for a year (surgery), the bike did not start and I drained the gas tank and put new gas in it, I also installed a new pilot jet (150) in the carb. the bike did not start, it is getting spark but it tried to start but failed. is there anything else I can try to look at to make sure the carb is working correctly. thank you.

@BuyBuildRide 5 жыл бұрын

Confirm that you have your idle screw set to the correct position and that you don't have an inline filter that is clogged

@fteiyp 7 жыл бұрын

Did you have to adjust it after putting the adjusted carb in?

@fteiyp 7 жыл бұрын

Also, how many hours did the full installation take?

@BuyBuildRide 7 жыл бұрын

I had to adjust the idle screw another half turn out as it was running lean at idle. Also it took about 1 hour to complete.

@fteiyp 7 жыл бұрын

Cool, thanks

@Mainrollman 7 жыл бұрын

Thanks for the video. I'm thinking of installing the same ProCycle jet kit and extended fuel screw on my 2015 DR650. This will be my first time working on a carburetor so maybe between this video and the provided instructions hopefully I can get the kit installed and tuned.

@BuyBuildRide 7 жыл бұрын

It is a fairly straight forward mod. The key is to take your time and be patient. If you have any questions while doing it feel free to ask.

@glennjaquess2181 6 жыл бұрын

I find an additional jet under the floats. Did you take off the floats to clean or replace it, or was that step not needed?

@zeppo08 5 жыл бұрын

Its a pilot jet. I recommend to clean it also if its removable. It has a smallest hole on it and any dirt will glog this hole easily.

@silverflash2379 4 жыл бұрын

You forgot to explain how to drill the diaphragm and holes in top of air box as per pro cycle kit ,

@ritid69 Ай бұрын

Filmed through binoculars

@firefly361ify 4 жыл бұрын

Good information but the camera work leaves the video unwatchable.

@NickleEyes 6 ай бұрын

Maybe next time lay the parts down and explain instead of spinning them around like a helicopter. Looks pretty easy tho

@patriotsleepercell4060 4 жыл бұрын

Horrible focus issues! While you are there drill the slide and cut down the spring to 100mm (4inches)

@kentuckyjustice1408 3 жыл бұрын

I'd really like to watch this vid, but all that back and forth blur makes me feel like I have one old contact and a current contact in. Someone needs to do a replacement vid. This one's giving me a headache. I'm outa here.