How to install a NITROUS Kit

Рет қаралды 55,130

Күн бұрын

In this video, we unbox a Nitrous Outlet universal single fogger wet system, and run through all the components, how they work, what they do and why you would be using them.
Nitrous Oxide, The throttle in a bottle, made famous by the fast and the furious movie franchise is an automotive chemical performance enhancer that has been around for decades. An instant horsepower increase for nearly any internal combustion engine at the press of a button!
Thanks for watching, and if you want to see more content like this, dont forget to subscribe to my channel, click the bell to recieve 'ALL' notificaitons.
You can see more great content such as the F350 project videos over on / fullboostcomau
As with all videos on this channel, information contained in this video is for entertainment purposes only. A trained and licensed mechanic should be the only person working on your vehicle. Information or Works carried out in this video may not be applicable to yours, so please do not replicate this without advise from your mechanic to save injury for yourself or someone else.
Instagram : / paulbroomy
Facebook : / broomysgarage
#nitrousoxide #nitrousoutlet #nos

Пікірлер: 42

@BroomysGarage 3 жыл бұрын

Have you used nitrous before ? What was it on ?

@wobblysauce 3 жыл бұрын

Ahh yes watching people do the purge... and then not have enough to go down the track.

@TorqHub 3 жыл бұрын

Dabbled in the nitrous with both a VS clubsport and BF XR8. Would love to spray a 300 shot in the VH SL/E eventually too 😈

@thekiltedveteran 4 ай бұрын

This is off topic, but my Crown Vic RPMs drop after the engine reaches regular temperature. When idling in drive at a stoplight, the car stalls. Replaced throttle body, sensors and air filter. This problem is probably like changing a tire for you guys, but hey, I'm asking the best 👌Thanks!

@thekiltedveteran 4 ай бұрын

... Also it is a P-71 Police Interceptor if that makes a difference.

@TorqHub 3 жыл бұрын

Big fan of the Nitrous Outlet products, and David Vasser seems to be a really great dude also. Some awesome innovations from that camp with the stinger series plates and nitrous puck.

@kabar123ar 2 жыл бұрын

I’m Listening to him talk about staging lanes and drag race terms when I’m just tryna slap a wet kit on my 1.8l 4 banger😅

@ekmikeymike1833 2 жыл бұрын

Thank you so much for this video💪🏼 Is this a full kit?

@tonysouza9546 2 жыл бұрын

Are the jets purchased separate?

@justinmendez5957 Жыл бұрын

I’m looking into just show, is it possible for me just to set up the purge kit ? without having the nitrous shoot into my engine ?

@Holmesy89 3 жыл бұрын

Will this primarily be used as a power adder or to assist in getting the turbo up faster?

@BroomysGarage 3 жыл бұрын

It will primarily be used to blow up my lawnmower. Secondary use I will think about later 😂

@Newbenwindowcleaningcom Жыл бұрын

Like the video , very clear , quick question , for the wiring are they as simple tapping to fuses box ?

@BroomysGarage Жыл бұрын

Yes, where ever you can get fused power from and send to a relay. Depends if they are going through an engine management system to trigger the solenoids or not. They supply the micro switch for the throttle body if not using an ecu. Fuse and relay are also included.

@Newbenwindowcleaningcom Жыл бұрын

@@BroomysGarage ah interesting I have hondata .. will be cool if I know where to tap the cable but I still need tune anyway.

@Anonymous_________ 2 жыл бұрын

The purple ZeX bottles are rated to 2500. I trust those better.

@raulreveles6293 2 жыл бұрын

Should the bolts on the solinoids screw in all the way. Mines get pretty tight mid way or a little above half

@BroomysGarage 2 жыл бұрын

Yeah the screw in all the way on the ones I have. There are different size and length screws, so maybe make sure they are the right ones.

@jessehern91 Жыл бұрын

Can i have a link for this exact kit?

@joshsutcliffe6099 3 жыл бұрын

What would be a good setup for my fuel injected vtwin

@ferdsan9025 3 ай бұрын

Nothing , if you want to go fast on a motorcycle..buy a sport bike. A Kawasaki z1000 will gap a nitrous Harley

@eddieshlips2871 3 жыл бұрын

How does this video have only 294 views after 3 days??? People are missing good content!

@8hp70cris 3 жыл бұрын

Do you have the link for this kit? I want to purchase it for my ram.

@BroomysGarage 3 жыл бұрын

nitrousoutlet.com/i-30560029-universal-efi-single-nozzle-system.html this is basically the kit, with a purge system and a blanket added to it.

@kylewiese302 2 жыл бұрын

How much would this all together cost and then how much are the individual cans

@cptn2stealurgrl522 Жыл бұрын

800 for the whole kit for what you need

@kylewiese302 Жыл бұрын

350 smallblock v8

@calebgodwin6022 Жыл бұрын

So I have a pretty well built foxbody with a 347 stroker I’m wanting to put nitro on it do I have to buy a new intake or what do I need to do with that I’m new to nitrous not trying to spend 2k on a turbo kit for my car

@BroomysGarage Жыл бұрын

Depends what intake you have on it now. Carby, efi ?

@calebgodwin6022 Жыл бұрын

@@BroomysGarage no I have a cobra upper and lower intake

@BroomysGarage Жыл бұрын

Check out their website. They may do a bolt on plate kit that sits behind the throttle body for that engine.

@_wimza_7983 2 жыл бұрын

I own a chrysler 300c crd V6 diesel, its a dry nitrous system and injector is Pre intercooler. I have it going into the turbo downpipe. Is there a better place i can fit it do you think?

@joetroy2904 Жыл бұрын

If you’re using it to spool the turbo that’s fine, if you’re using it as a main power adder it should be in the throttle body if possible.