How to Install a Onewheel GT S-Series Controller Module
Рет қаралды 3,337
25 күн бұрынControllers can now be replaced at home. This process is technical and needs to be done very carefully. We've published a video tutorial with a step-by-step install guide that needs to be followed exactly. If you are uncomfortable with the process, we offer a Controller Replacement Service with a 6-month warranty.
Make sure your board is registered in the Owners Portal at my.onewheel.com. After installing your Controller, you must activate it within the app/Onewheel Owner’s Portal to ride.
Note: All component sales are final and no returns are available. Also, please ensure you select the correct Onewheel variant, Controllers are not cross-compatible.
When replacing your Controller, make sure to replace your Motor Hub Bolts and Gasket.
Warning: high-powered lithium batteries can be dangerous if not handled properly. Failure to follow installation instructions properly can lead to serious injury, fires, and risk of death. You can also damage your board or make it unsafe to ride if done improperly which will not be covered under warranty.
_____________________________
Check us out at www.Onewheel.com and grab yourself a board today!
Onewheel GT S-Series: onewheel.com/pages/onewheel-g...
Onewheel GT: onewheel.com/products/onewhee...
Onewheel Pint X: onewheel.com/products/onewhee...
Onewheel Pint: onewheel.com/products/pint
Onewheel Accessories: onewheel.com/pages/all-access...
DESTROY BOREDOM WITH US
Instagram: / onewheel
TikTok: / onewheel
Twitter: rideonewheel?lang=en
Facebook: / onewheelofficial
SUBSCRIBE TO THE ONEWHEEL NEWSLETTER
onewheel.com/pages/newsletter...
New to the channel? Check out some of our playlists!
The Onewheel Podcast: • The Onewheel Podcast
Onewheel Shred Series: • Onewheel SHRED SERIES
#onewheel #onewheelgt #onewheelpintx
@MrMark-sr2fs 23 күн бұрын
Just in time for the GTV Power Kit 😂
@jimmboy48 20 күн бұрын
I just got my GTV installed and it feels great. Way better than a stock GT. I would recommend to anyone who wants more out of their board.
@MrMark-sr2fs 19 күн бұрын
@@jimmboy48 just got my GTV Power Kit today! Need to find the time to install it and un-FM my GT.
@Mowguli 23 күн бұрын
The stage has changed. We can officially own our board anywhere we want to. Thank you!
@notthatjonathandavis7609 22 күн бұрын
Awesome, so glad to see all the parts available. Now I just need you guys to make an extended range battery for the GTS and I'll be golden lol.
@itssimplyjeff1 22 күн бұрын
if you buy a GTS controller module and a GTS battery module, can you upgrade a GT to a GT-S? you'd obviously need to get the GT-S charger and probably eventually upgrade the motor, but very curious.
@frankcabacungan8421 20 күн бұрын
I’m very interested in this as well
@Luso___ 23 күн бұрын
It's great to see something like this finally happening
@ivangrigorev6614 23 күн бұрын
Okay okay guys, just calibration for angled rails as a cherry on top and y’all can go on vacation for couple years 💪🏼🤣
@nicoaleman 23 күн бұрын
Is there any registration/activation that needs to be done through the app, similar to the Battery Module swap? Or does it automatically pair to the first Battery Module that it's connected to?
@Onewheel 23 күн бұрын
Yep, same process as the battery module but instead of clicking activate battery you'll just click for controller module
@nicoaleman 23 күн бұрын
@@Onewheel Thanks for the clarification, wasn't included in the video like the Battery Module video so wasn't sure, appreciate the response ✌
@dfc9944 23 күн бұрын
this is so based
@NtotheO91 23 күн бұрын
This is awesome! Any chance we also get some insights into the board diagnostics? Like battery cell balance monitoring etc?
@fixmypev 23 күн бұрын
Stoked for controllers! 🤙🏼⚡️🛠️ Do these come with a cover, screws, and a gasket?
@Bobby-o-Float 23 күн бұрын
Any chance to see voltages on the XR? I'm sketched out riding my board on the streets after having it stored in the winter. Hate seeing all these videos of boards just shutting off randomly and it would suck even more in traffic
@Sigeo1vl 23 күн бұрын
Great job FM, and thank you for listening to the community. Also a suggestion could we get a retro series board that looks like the XR. That design is classic for the days when you want a lightweight cruiser.
@notthatjonathandavis7609 22 күн бұрын
XR is still the best looking in my opinion for sure.
@Jameslangford-rc6sw 23 күн бұрын
FINALLY! FM is redeeming themselves!
@drumstickscarecrow 23 күн бұрын
Having these parts available now, would it be possible to upgrade a standard GT to a GT-S by swapping the motor, battery module, and controller to their GT-S variants?
@jordanmacfarlane5807 23 күн бұрын
I don’t see why not you could even use the 6” hub and better foot pads !
@drumstickscarecrow 23 күн бұрын
@@jordanmacfarlane5807 The only reason I could possibly see it NOT working is because of the serial number. I don't know if a GT's serial number could be "ported over" to what would essentially be a new GT-S build. I know FM says the controller is for repairing a board, but not sure if it's limited to just that. Being able to convert a GT to a GT-S would be a huge win for people wanting to upgrade that don't mind sacrificing parts of their GT in the process.
@itssimplyjeff1 23 күн бұрын
@@drumstickscarecrow i'm not sure if this is possible, the GTS uses a different charging plug edit: it actually looks like you can buy the GT charging port, but not the GTS just yet. i think once that's available, you should be able to "upgrade" your board. i think most will upgrade the motor first, then do the battery+controller+port together
@drumstickscarecrow 23 күн бұрын
@@itssimplyjeff1 Oh yeah, that's something I hadn't thought about yet. The charge port should be a non-issue since that's built into the hardware you'd be installing. However, you'd also have to get a GT-S charger since the GT charger doesn't work with the GT-S.
@_OneJ_ 23 күн бұрын
No way!!!! This is awesome.
@Onewheel 23 күн бұрын
Yes way!
@BuggMann91 21 күн бұрын
I seem to remember a few years ago you guys telling us all we definitely didn't want interchangeable parts for our boards. I'm glad to see the seeming change of heart, but makes me wonder.
@bencrystalofficial 23 күн бұрын
Game changing ✨
@Onewheel 23 күн бұрын
❤
@thejunkmanlives 21 күн бұрын
ive seen so many guys strip these apart and have never once seen anyone talk about torque specs(thank you). But why in Newton-meters? why not ft lbs? also wouldnt you want some lub for the gasket?
@jeremiahjenkins9221 23 күн бұрын
What does this do?
@haymose_ 23 күн бұрын
When is V8?
@Lukejohnson09 23 күн бұрын
Please do this for the xr
@quangyung6751 23 күн бұрын
they don't make xr or parts for xr anymore.
@ChristopheGUIVANT 23 күн бұрын
What is going on??? June is Christmas at FM headquarter???
@sfctac 23 күн бұрын
Why are new hub bolts being recommended?
@Tactical_Taco 23 күн бұрын
The loctite.
@Onewheel 23 күн бұрын
As Taco mentioned it's for the thread lock. Once you break the seal on the bolts from the factory over time the bolts can loosen due to vibrations. Fresh hub bolts come with a fresh coating and will be more secure than reused bolts
@annuet6454 23 күн бұрын
Fresh loctite and cheap assurance that you’ll be putting in bolts that won’t be overly stressed from multiple removals or have a stripped bit or threads.
@sfctac 23 күн бұрын
@@Onewheel I've taken my XR apart dozens of times, are these bolts any different? It's great that parts are available for sale but this recommendations seems wasteful. Just tell us which loctite is being used.
@Scayo15 23 күн бұрын
In theory could we upgrade our gt's into gt-s's with just the full kit?
@josephknowles1326 23 күн бұрын
He’s a ball of joy!🪐
@p0rtugeek 23 күн бұрын
Someone wake me up!
@MightyFineMoran 22 күн бұрын
:))))
@OfficerTacosMcGee 23 күн бұрын
I just received my One wheel Pint X today. Can someone explain what the hell is going on
Alex Lepoutre
Рет қаралды 4,8 М.
Freshly Charged
Рет қаралды 33 М.
The DIM SUM TECH
Рет қаралды 3,5 М.
МЯЧ Shorts
Рет қаралды 307 М.