How to Install a PiCamera V2 on a Raspberry Pi 4 with Ubuntu Core
Hi everyone,
In this video I’ll show you how to install a PiCamera v2 on a Raspberry Pi 4 using Ubuntu Core Linux distribution.
#ABOUT UBUNTU CORE
Ubuntu Core is dedicated to IoT and a nice option to explore these peripherals.
To create an Ubuntu One account, please visit:
login.ubuntu.com
PICAMERA MODULE V2 DETAILS
The Raspberry Pi Camera Module v2 replaced the original Camera Module in April 2016. The v2 Camera Module has a Sony IMX219 8-megapixel sensor (compared to the 5-megapixel OmniVision OV5647 sensor of the original camera).
It supports 1080p30, 720p60 and VGA90 video modes, as well as still capture. It attaches via a 15cm ribbon cable to the CSI port on the Raspberry Pi.
#SOFTWARE
You can download the Raspberry Pi Imager from:
www.raspberrypi.org/software/
If you use Windows, you will need Putty software to make SSH remote connections to your Raspberry
Pi. Please download it from:
the.earth.li/~sgtatham/putty/...
To generate SSH RSA key, please download the following tool, also from Putty.org webpage:
the.earth.li/~sgtatham/putty/...
Thanks a lot! Hope you enjoy the video.
Regards,
Rodrigo Matias