How to Install a Redarc Tow-Pro Elite Brake Controller on a Ford Everest with AEB System

Рет қаралды 7,327

Күн бұрын

In this video, I'm showing you how to install a Redarc ‪@REDARCElectronics‬ Tow-Pro Elite V3 Brake Controller on a Ford Everest with AEB System (Autonomous Emergency Braking).
Here's what I'm going to cover in this video:
- Installing a Redarc Tow-Pro Elite V3 Brake controller (latest model)
- Where to put the dial, brake controller unit and run cables and wiring.
- Connecting power cable, wiring harness, trailer plug and brake controller using a one-way diode.
- Where to pick up power for brake light switch trigger on Ford Ranger or Ford Everest (2019 onwards) depending on whether the vehicle has an AEB System (Autonomous Emergency Braking).
0:00 Introduction - Fitting a Redarc Brake controller
0:40 Fitting the dial
2:40 Fitting the control box unit
3:40 Pick up battery supply using inline fuse holder
7:07 Removing kick trim
7:47 Running cable to trailer plug
11:47 Connecting power cable, wiring harness, trailer plug and brake controller using a one-way diode
14:30 Completed connections
15:34 Where to pick up power for brake light switch trigger? AEB - Autonomous Emergency Braking System
Subscribe here: / @vesautoelectrics
#brakecontroller #12v #autoelectrics #fordeverest #autoelectrical #fordranger #ford
Cheers! 🙂
DISCLAIMER: The information provided by VES Auto Electrics ('we', 'us', or 'our') on our KZfaq channel is for general informational purposes only. All information on our KZfaq channel is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability, or completeness of any information on our KZfaq channel. Under no circumstance shall we have any liability to you for any loss or damage of any kind incurred as a result of the use of our videos or reliance on any information provided on our KZfaq channel. Your use of our videos and your reliance on any information on our KZfaq channel is solely at your own risk.
Our KZfaq channel may contain links to other websites or content belonging to or originating from third parties. Such external links are not investigated, monitored, or checked for accuracy, adequacy, validity, reliability, availability, or completeness by us. We do not warrant, endorse, guarantee, or assume responsibility for the accuracy or reliability of any information offered by third-party websites linked through our KZfaq channel. We will not be a party to or in any way be responsible for monitoring any transaction between you and third-party providers of products or services.
The VES Auto Electrics KZfaq channel contains auto electrical information only. Our KZfaq channel cannot and does not contain other electrical (commercial, residential, industrial) information. The auto electrical information is provided for general informational and educational purposes only and is not a substitute for professional assistance. Accordingly, before taking any actions based upon such information, we encourage you to consult with the appropriate professionals. We do not provide any kind of advice that contains electrical (commercial, residential, industrial), engineering, and/or battery technology information. The use or reliance of any information contained on our KZfaq channel is solely at your own risk.

Пікірлер: 19

@venturingfour Жыл бұрын

Great vid mate! Just ordered mine so really appreciate you putting this up and explaining in full detail. Champion. 👍

@vesautoelectrics Жыл бұрын

Thanks for the feedback, glad it helped 👍

@camwebb5943 Жыл бұрын

Hi great video. Is there a part number for the diode or number on it

@kevinstill7629 5 ай бұрын

Thankyou for your video and advice cheers kevin

@vesautoelectrics 5 ай бұрын

Glad the video’s helped. Let me know if you need any other info.

@kevinstill7629 4 ай бұрын

@@vesautoelectrics just finished installing per video and instructions with the diode around the right way but my blind spot and trailer is connected display keeps coming up every few minutes while driving even though trailer is not connected Any thoughts please I have a 2015Ford Everest with AEB braking .Thankyou Kevin Still

@faircloughfern771 Жыл бұрын

Thanks for posting the video, I found it helpful with the install in my 2019 ranger, though have been (intermittently) having issues with 'fast flashing' (of the dashboard indicator lights) when indicating left or right. I have reviewed my wiring and confirmed teh diode is installed in the correct orientation, and that my pickup is after it. Mine is a 2019 Australian XLT Ranger with Automatic Emergency Braking (AEB) & Adaptive Cruise control. Further reading leads me to believe this model does require the special filter component included in the $300 AUD TPWKIT-012 kit (see link, small red package goes in-line with red wire at the controller). I thought I'd point this out for others so you can malke an informed decision before trying to install without the kit... If you have any further advice / info on the filter circuitry I would love to hear it before I buy the kit. www.redarcelectronics.com/au/tow-pro-wiring-kit-tpwkit012?gclid=Cj0KCQjw756lBhDMARIsAEI0AgnkucCahwXMa-pGkYk_TIY1Q0ughBZsOxLadW55FBeCkHqVAPP9fUIaAnCXEALw_wcB

@vesautoelectrics Жыл бұрын

Thank you for the feedback. If you have AED cruise control you normally need to pick up the brake light trigger from the trailer socket. This will stop ‘ hyper flashing’ from the indicators. But on some of the later models you do require the wiring harness with module as you’ve listed. I have found that 1 in 10 installs require the harness which makes it difficult to decide. Really weird?

@gerardosullivan7126 Жыл бұрын

@@vesautoelectrics Hey Mate great video! Im going to do mine but a little confused as you said at end of vid that if you Do have AEB to pick it up back at the trailer socket and use diode-OK. But on this comment you also said if you Do have AEB to pick up at the brake pedal switch? That must be a misprint is it? Cheers

@vesautoelectrics Жыл бұрын

Hi, yes sorry my miskate, it’s a misprint. Yes if you have AED then pick up is at the trailer plug. But there has been instances where intermittent hyder flashing still occurs.

@andrewmcsporran526 Жыл бұрын

@@vesautoelectrics hey mate also just wanted to add/ask about the wire sizes you said you used in the video, in the instruction book it says blue (3.00mm), red (1.25mm). Did you use 5mm and 3mm as you stated or did you match the size of the wires on the plug? Thanks 👍

@vesautoelectrics Жыл бұрын

Hi, i always use 5mm blue (good for upto 30amp) for the electric brake supply (pin 5 ) as some controllers can pull upto 25amps and also using larger cable reduces voltage drop. And out of habit i use 3mm red for brake trigger ( cable size can be smaller as it’s only a trigger).