How to install a Spartan locker in the rear. 8" Toyota. 3rd gen 4runner, Pickup and more

No video

How to install a Spartan locker in the rear. 8" Toyota. 3rd gen 4runner, Pickup and more

Рет қаралды 6,846

2 жыл бұрын

Lunchbox locker install.
@funjunkiegarage
www.etsy.com/s...
throneofiron.b...
#toyota4wd #doitdamnit #Funjunkie #myhappydriveway #toyota #alwaystoyota #ohwhatafeeling #tundra #tundralove #lovemytundra #tundraoffroad #tundraoffroad4x4 #toyotatundra #toyota4x4 #yota #sr5 #teamyota #overland #offroad #tundramafia #teq #1stgenTundra #2uz #2uzfe #toyotafreaks #toyotalife #tundra4life #tundralife #stellarbluepearl #tundraadventures#toyota #alwaystoyota #ohwhatafeeling #4runner # #toyota4runner #3rdgen4runnermafia #4runner4life #4runneroffroad #toyota4x4 #toyota4wd #yota #sr5 #teamyota #overland #adventure #offroad #explore #teq #3rdgen4runner #myhappydriveway #Funjunkie #doitdamnit #toyotafreaks #toyotalife #lovemy4runner #5vz
#toyota #alwaystoyota #ohwhatafeeling #Tacoma # #toyotatacoma #Tacoma4life #Tacomaoffroad #toyota4x4 #toyota4wd #yota #teamyota #overland #adventure #offroad #explore #teq #1stgenTacoma #myhappydriveway #Funjunkie #doitdamnit #toyotafreaks #toyotalife #lovemyTacoma #3rz
Toyota,4wd,1st gen,3rd gen,4runner,Tundra,T4,Funjunkie,White,Blue,offroad,off,road,adventure,fun,camping,towing,install,mods,modifications,overland,rig,4x4,build,homemade,DIY,fab,fabricate,project,wheeling,welding,armor,sliders,skids,skid plate,boatside,bumpers,lift,lifted,bumper,locker,lockers,IFS,double locked,lift,lifted,4.88,4.88s,5100s,Bilstien,limited slip,airbags,Red,Tacoma,3.4,5vz,4.7,2uz,wheelin,enjoy,

Пікірлер: 18

@unclequack5445 Жыл бұрын

My 1st time was a Lincoln Lock. this diff has been gone into before.

@funjunkiegarage Жыл бұрын

I've had more that one with the Lincoln Locker. For off road only, it's great.

@mikeypotts4732 2 жыл бұрын

Thanks for the video!

@funjunkiegarage 2 жыл бұрын

You're welcome. Thanks for watching!

@Blackfourtrak 2 жыл бұрын

spartan doesn't look in bad condition?

@funjunkiegarage 2 жыл бұрын

It has only 600 miles on it. So it's basically a new unit.

@nickmudd Жыл бұрын

Not sure if there is a difference, but my powertrax locker instruction book says to keep the side thrust washers

@funjunkiegarage Жыл бұрын

Thanks for watching and commenting. Yes there is a difference in different manufacturers. I used Aussie brand lockers and they require the thrust washers be retained. I think the lock rite brand does also. Spartans definitely say to remove the thrust washers. I appreciate the question

@theotherguy3083 Жыл бұрын

Powertrax aren't spartan locker. Spartan lockers don't require thrust washers.

@funjunkiegarage Жыл бұрын

Thanks for the confirmation. I appreciate you watching.

@humanguswangus 11 ай бұрын

good video. i've run the spartans in my old cherokee, but i sold it before owning for a year. now, in my taco, i'm thinking of doing the same. do you have any feedback on long term drivability?

@funjunkiegarage 11 ай бұрын

Thank you. Yes, I've run lunch box lockers in my offroad vehicles for years. Spartans are my new favorite because they are the best price. However their design is exactly like a Lockrite. Between those 2 brands I've had years of on and off road experience and the durability and longevity is impressive. I've never had an issue. Thanks for watching and commenting. I appreciate the support.

@brandon_koharchik577 Жыл бұрын

when welding the rear end, I just welded the spider gears to the cross bar. is that good enough or should I take the spider and cross bar out and just weld the side gears to the case? thanks. its off road only.

@funjunkiegarage Жыл бұрын

Thanks for watching and commenting. I have always welded the spider gears to the case. I leave it complete and weld all 4 gears to the case. I've never tried it any other way.

@seanmcnichol5324 9 ай бұрын

Do you have a part number for the locker you used?

@funjunkiegarage 9 ай бұрын

I got mine from Amazon Here is the link USA Standard Gear Spartan Locker for Toyota V6 with 30 Spline Count (SL TV6-30) a.co/d/6Az9tQu Hope this helps. Thanks for watching and commenting.

@kris.tamala Жыл бұрын

8” differential or 8.4”?

@funjunkiegarage Жыл бұрын

Thanks for watching and commenting. The one I do in the video is 8". The 8.4" is done the same way. Only difference in the 8.4" is the truss across the bearing caps.