How To Install A Thermometer on a Grill I WSM Thermometer Upgrade
Рет қаралды 7,612
Күн бұрынToday I will be showing how to install a thermometer on a grill, specifically the Weber Smokey Mountain, The thermometer we will be installing today is the Tel Tru Thermometer.
The model we are installing is the Tel-Tru Bq300 with a 3 inch black dial with zones, 2.5 inch stem.
Tools Needed will be a Step Bit
Masking Tape
Good Drill
High Heat Paint
Foam Brush or cloth.
0:00 Intro
0:31 Remove the old thermometer
0:55 Place a small strip of masking tape over the area
1:35 Drill hole according to diameter needed per instructions
2:13 Make sure it fits properly
2:35 inspect hole
3:23 Paint edges with High heat paint
3:45 Install Temp according to installation instructions
4:23 Two day later update
Step One: remove the old thermometer
Step Two: place a small strip of masking tape over the area
Step Three: Drill hole according to diameter needed per instructions
Step Four: Paint edges with a high heat paint
Step Five: Let dry for Ten min
Step Six: Install Temp according to installation instructions
Links to Items
Tel-Tru Thermometer Installation Kit: amzn.to/3ua3D95
Tel-Tru Thermometer: amzn.to/3wgRSQ4
@snapnpiksallthetime7672 2 жыл бұрын
Guy videos rock straight to the point, gal vids they blather on and on lol.
@BackyardSmoke614 2 жыл бұрын
Thanks man. Lol Short simple ans straight to the point works best.
@WookieLove1 3 жыл бұрын
Great video. Thanks for doing it. Good job backyard!
@BackyardSmoke614 3 жыл бұрын
Thank you sir, much appreciated
@1526BBQ 3 жыл бұрын
Thats a well seasoned wsm bro! Thanks for the how to, I am upgrade my wsm too.
@BackyardSmoke614 3 жыл бұрын
Awww yeah man I work my WSM. It's earned its keep
@BrisketMedic 3 жыл бұрын
I love telltru top of the line!
@BackyardSmoke614 3 жыл бұрын
Yeah i agree, worth the upgrade for sure
@TaylorsFSCooking 3 жыл бұрын
Those teltrue gauges are top notch
@BackyardSmoke614 3 жыл бұрын
Yeah I love it, was a choice between tel true and River Country
@kenethsoberano 3 жыл бұрын
They primary sell the Tel-Tru units for larger pits that already have a threaded insert welded to the smoker. The locknut provided allows you tighten it in the upright position after you've screwed it into the welded insert. Retrofitting like you did requires the additional hardware.
@BackyardSmoke614 3 жыл бұрын
Wow I did not know that. Thank for the information 🙏
@TheLisaDeesDelightsShow 3 жыл бұрын
Here watching friend
@BackyardSmoke614 3 жыл бұрын
Awww thank you Lisa. 😊
@TheLordIsAlmostHere 3 жыл бұрын
I just bought 2 of those suckers for my offset. Thirteen bucks each for those nuts is ridiculous when the stupid thermometer should come with it in the first place.
@BackyardSmoke614 3 жыл бұрын
I agree they should have came with the thermometer or at least cost much less.
@Clix4Kix 3 жыл бұрын
That accessory kit is ripoff. You can probably achieve the same results with a five cent washer and the original locking ring. Except that tightening that kind of ring tight enough will scratch through the porcelain inside. Very disappointing they don’t include better hardware with such a quality thermometer! Thanks for your videos!
@BackyardSmoke614 3 жыл бұрын
I agree with you 100%. I did send it back and was able to get a similar set up from the local hardware store for under $2.00. Thanks for watching man.
AnythingAlexia
Рет қаралды 24 МЛН
Mad Horse BBQ
Рет қаралды 76 М.