We are going over the steps to install tow hook for a 2009 Nissan Frontier XE. This includes adding a 2-in-1 reform & seal before installing a factory tow hook.
1. Intro - 0:01
2. Step 1 (Clean/Brush Area) - 0:52
3. Step 2 (Rinse Area) - 1:15
4. Step 3 (IPA Area) - 1:35
5. Step 4 (Thoroughly Mix Paint) - 2:05
6. Step 5 (Apply Paint) - 2:34
7. Step 6 (Apply Threadlocker) - 3:00
8. Step 7 (Install Tow Hook Assembly) - 2:39
9. Step 8 (Torque Tow Hook Bolts) - 4:06
10. Once Over - 4:24
Products Used:
This video contains affiliate links for which I may receive compensation.
Tow Hook (51112-9BT0A) - shop.hartnissan.com/p/105790806/51112-9BT0A.html
amzn.to/43ZYguO
Flange Bolts [2] (081B7-2452A) - shop.hartnissan.com/p/89384638/081B7-2452A.html
Extension Bar Set - amzn.to/3Qsk9jd
Chip Paint Brushes - amzn.to/3ONkQlR
Rust-Oleum 344763 Automotive 2-in-1 Rust Reform & Seal - amzn.to/3Yt2ytd
Torque Wrench (12.5-250 ft) - www.harborfreight.com/hand-tools/sockets-ratchets/torque-wrenches/12-in-drive-125-250-ft-lb-digital-angle-torque-wrench-64916.html
Wire Brushes Pack - amzn.to/3rW7GKe
Tools:
1/2" Socket Wrench
17mm Socket
75mm Extension
Flat-Head Screwdriver
Paint Brush
Shop Towels
Torque Wrench (Req: 96 ft-lb)
Wire Brush
Disclaimer: Content produced from Mcgurr Entertainment is for entertainment purposes only. This information is not endorsed by any agency/company (such as Ford) and is intended as an entertainment. Mcgurr Entertainment assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All content on KZfaq is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on KZfaq. Use this information at your own risk.
#Frontier