ah boy...glad I could've helped! 😄

hahaha...awesome! Yep I'm a Trini 😅 Let me know how it goes...love the Altezza! 😆

I noticed that the remote start push start kit you listed isnt available on Amazon anymore. I am looking to aliexpress for my stuff, both push to start, remote start, trunk release kit and also open close window and wing mirror. Do you have any tutorials for the last two?

Hey...the seller just doesn't have the kit with that particular key fob at the moment. However, check this...www.amazon.com/dp/B00HCBEYW0/_encoding=UTF8?ref=exp_inf_pl_influencer-abe9144c . This is the same kit from the same seller, just with a different keyfob. In terms of opening and closing windows, and wing mirrors, that would require a more sophisticated alarm system, which I'm not sure exists on a mass-market type of alarm system. What you're looking for, is probably more application-specific. The only thing I can suggest there is asking the seller "EasyGuard" on Amazon if he has an alarm system which incorporates those features as well. Here's his email address, incase you're interested: eddykwok@foxmail.com . He's very responsive (back when I used to ask millions of questions before and after purchasing it from him), and speaks (well types) and understands English surprisingly well. Give it a shot, and let me know.

The Auto DIY Guy really helpful thanks. This is kit I found on Ali express that also does window up down but the seller hasn't been able to communicate with me effectively as to whether or not all parts necessary included in the box Auto Car Alarm Engine Start Stop Button Remote Start Open and Close Windows Version Smart Key PKE Passive Keyless Entry System s.aliexpress.com/ZviIzE7J (from AliExpress Android). As for the wing mirror let me know your thoughts on this Auto side mirror folding system Intelligent Auto Side Rear View Mirror Closer Parking Alarm System Rear Vision s.aliexpress.com/RzYjYbum (from AliExpress Android). And finally I am looking to install reverse sensors as well. Do you have a tutorial on that? This is the link for the reverse sensor 100% Original Steelmate Ebat C1 4 Sensors Parking Assistant Sensors Reverse Radar Alert System with External Buzzer Speaker s.aliexpress.com/Uj6rqyUj (from AliExpress Android). I use AliExpress for the cost as well as quality and also its lower taxes to Import where I am {I'm a trini living in Antigua) with taxes 80% minimum and you can't find an expert who knows what they doing to install.

Another question I had was whether if the sensor conches out and you use your regular key to open the door would the push botton respond?

Unfortunately your existing alarm must have provisions for remote trunk release, to allow you to use this mod. This is why I had to install a new alarm system to be able to activate this device via the key fob.

It can be separate or work together with existing trunk lever

@@TheAutoDIYGuy great. Thanks

WuPiDu haha you’re absolutely right! I did end up cleaning those wires up. Thanks for watching!

krish gya once the alarm system that the universal remote is tied to has provisions in place for a remote trunk release, then you should be fine lol

Well actually...the solenoid opens the lock when the button is pressed. The lock is closed when you close the trunk. The solenoid literally does the exact same thing as the lever you usually pull to pop the trunk.

Thanks for watching!

4 years late but the answer is No. this system allows you to unlock it via key fob, And release button. You can still unlock it via key or pulling the lever if you want to. The trunk will lock no matter what if you close it.

I know you posted this question a while ago, and have probably worked this out by now, but for anyone else who might stumble across this question, the answer is no, you can not power the solenoid directly from an alarm / remote starter system. The solenoid draws too much current. You will need to use a relay between them. The relay will have four connections to it, and you will need to know if the signal from your remote system is positive or negative. You can connect your remote system output to pin 85 on the relay. If the remote output is positive, then pin 86 on your relay goes to chassis ground. If the remote output is negative, then pin 86 on your relay goes to battery positive through a small (3 amp or less will be fine) fuse. Pin 30 on your relay goes to battery positive, and you use what ever size fuse the solenoid kit calls for on that power wire. Pin 87 of your relay then goes to the solenoid positive.

@@thomasherring6640 i wired it up exactly as you wrote, but it still doesn't work. Same solenoid, wiring it to a DS4+. Does the relay need to be a 12v or a 5v? I read somewhere else that the relay has to match the output voltage(?)

@@jonnyrussell3982 I expect that the output from your remote system is 12v. Did you check the output wire to determine if it is a negative, or positive output?

@@thomasherring6640 the diagram lists it as a negative output. It's really baffling me, I've tried all manner of wiring it to 3 different 12v relays, in different configurations, and it just will not signal the solenoid. The solenoid works fine, though with a button connection.

Can you use a multimeter, or at least a 12v circuit tester to verify that you are actually getting a 12V Negative signal on that wire when you push the button on the remote? It is possible that you have to activate a setting on the remote, or you need to hold that button down instead of just pushing it, or something else silly like that.

dontnow100 depends on the existing alarm system you have installed 😀... For example, check my video on how to install a start stop button with passive keyless entry... That alarm system has the provisions necessary for opening the trunk via the key fob.

Oké will do. Thank you very much for your informational videos!

Hot Cheetos I had the same issue... But I realized after all of the fidgeting and adjustments, that the solenoid needs to be practically perfectly in line with the lever to be pulled to open the trunk. Oh also... Make sure that you leave slack inside the solenoid as well... I remember that was also an issue for me. I just assumed that if I pull it out all the way and then tie it that it'll work, but nope... So try pulling it out about halfway from inside the solenoid before tying it off to the lever. One last thing... Make sure the lever can be opened easily by pulling the lever manually.

Thanks for your reply. Before trying out your suggestion, I decided to try one last thing since I didn't want to relocate the solenoid. Basically, I stretched the tension spring on the lever and it worked! Now, I'm stuck on trying to program the trunk release to my auxiliary button on my viper 3002 alarm remotes. Do you think that you could help me figure it out? I've already hooked the wire to the 1st hole on the main harness (H1/1) of the viper box.

correct!

This is only possible if your existing alarm system has provisions for it. Otherwise, you’re going to have to install an alarm system with that feature built in. Check out this video if you’re interested kzfaq.info/get/bejne/h7pdi9B32quro6s.html

This seleniod assembly make a rattling noise while your driving.

hi, send me an email: paulsamaroo@gmail.com and I will help you out there :)

I dont mean to be offtopic but does anybody know of a tool to log back into an instagram account..? I stupidly forgot the password. I appreciate any help you can give me!

@Kaysen Tomas Instablaster ;)

troy johnson ahhh! Great idea. I will put that down on the list! I'll do some research on it right now :)

yeah....thank you.your videos make installation looks easy. keep up the job.

The Auto DIY Guy yes I am very interested in seeing that. what do you have planned next? your videos are awesome and very easy to uunderstand. thanks!

Aditya Graha Pratama that's coming in a later video :) it depends on the alarm system you have

What if I have the Viper 3002 2-way alarm system

Ronaldo95163 yep