The Right Way To Install a Start/Stop Button

No video

The Right Way To Install a Start/Stop Button

Рет қаралды 695,648

Күн бұрын

If you would like to help support the channel and project Evo, you can click the link below:
www.paypal.com...
Check out my updated video!
• Control your Car with ...
This is the proper way to install a push to start button, in a car without an immobilizer chip in the key, without any key required
This is a tutorial of a push to start system installation which I purchased from Amazon.com for $46.00. If you have any questions, please feel free to ask in the comments section, and I will try my best to answer them. Links in the description.
By shopping on Amazon.com via this link, you'll become 5x cooler 😎 (but seriously...if you'd like to support the channel at no cost to you, just use this link to shop on Amazon 😁) amzn.to/2GaYHZg
You can contact me via email @ paulsamaroo@gmail.com
Products & Tools used in this video:-
- www.amazon.com...
Start - Stop button Kit (USA):-
www.amazon.com...
Start - Stop button kit (UK):-
amzn.to/2RFUBC7
Immobilizer Bypass Module:-
www.amazon.com...
Multimeter:-
www.amazon.com...
Heatgun:-
www.amazon.com...
Website for wiring diagrams:-
- goo.gl/W3L4xO
For any business matters, contact me on my email address: paulsamaroo@gmail.com
Special thanks to incompetech.com/ for the royalty free music featured in the background of this video.
Disclaimer:
Due to factors beyond the control of The Auto DIY Guy, the improper implementation, use or unauthorized modification of the information provided in this video cannot be prevented. The Auto DIY Guy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. The information displayed is to be used at your own risk. The Auto DIY Guy recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of The Auto DIY Guy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not The Auto DIY Guy.

Пікірлер: 1 200

@TheAutoDIYGuy 8 жыл бұрын

OMG 10,000 views! You guys are amazing! Thank you so much for watching...it means a lot :D

@HXNDRO222 8 жыл бұрын

You did a great job explaining clearly in your video and including all those helpful links. bravo

@anasrakhda1145 8 жыл бұрын

Bhai Th Indien Hay?

@marcusreynolds8884 7 жыл бұрын

AWESOME VIDEO Buddy! I was thinking of putting it on my be 2002 jetta tdi. Hope it works for me as well

@leesmijnnaamnietsukkel9917 7 жыл бұрын

The Auto DIY Guy 100,000

@melissapabon7247 7 жыл бұрын

The Auto DIY Guy How would you wire this into a vehicle that already has a remote start viper 5305v system installed?

@JMRRebuilders Жыл бұрын

We love this system. Really affordable. We installed it on our 95 F150 that we coyote swapped as well. Great stuff.

@kennethbishop1457 4 жыл бұрын

what about the steering wheel lock

@jfrankieechosen5204 4 жыл бұрын

This was the most simple, INFORMATIVE VIDEO I'VE SEEN THANK YOU. ORDERING MY KIT RIGHT NOW I FEEL CONFIDENT

@cheybludick8628 8 ай бұрын

His thumb really said “c”

@16blank45 2 жыл бұрын

“Dem one handed skills thooooooo”. Definitely a Trini. Thanks for this man, top notch stuff. From your Jamaican cousin!

@cristianminut5436 8 жыл бұрын

Where can i find a kit lie that? I'm from Romania.

@paulsamaroo 8 жыл бұрын

You can get it on Amazon.com, it's in the description :)

@leonlouiswalker 8 жыл бұрын

Boona +Cristian Minut.

@Pineapplxpress0 3 жыл бұрын

Ebay

@chi-townantoinewest933 7 жыл бұрын

I just looked at your video and I am ordering it because of you . you make it look so easy and I always wanted one on my Montero sport. just ordered it can't wait thanks for the tutorial. good looking out.

@cuttyb 5 жыл бұрын

Do you know how easy it is to to hack RFID? I could copy and clone your transponder from across the street... Awesome! I won't have to jiggle the locks with a shaved key to get in And you saved me the trouble of breaking your steering column by disabling it. Could it be any easier? If I come across this anywhere believe me I will take your car...in broad day. I'll just get in a drive away like its mine... Cuz it will be.

@ralfsdiezins1161 5 жыл бұрын

And of course you're black.

@a91editionsupra14 5 жыл бұрын

Stupid

@uptownsfinest1598 5 жыл бұрын

@@ralfsdiezins1161 fuck does being black have to do with getting your car stolen smh

@ghhg244 5 жыл бұрын

Yes as if you would know that the car had an rfid tAg in it

@cuttyb 5 жыл бұрын

@@ghhg244 dude... all you gotta do is look for a push start button. If that car doesn't come with one from the factory then You know you got a winner

@bernhard8540 4 жыл бұрын

Not a bad video I have to say you actually showed pretty much everything including the steering lock so good job man most videos don't show you half of what your supposed to do :) I'm installing this in my wife's car for her and this helped alot

@TheAutoDIYGuy 7 жыл бұрын

Hey guys...check out my latest push to start install video kzfaq.info/get/bejne/f8CDac2c0LbZkXU.html ...wayyyyyyy better than this one.

@QWERTYNG1 7 жыл бұрын

First of all, thanks for the video you made, you helped me a lot, and it's definitely one of the best on the net! I have a problem, randomly, it happens a lot, I can start up engine with the button + brake even without having rfid running! I would be happy if you could help me with this! It's scary to leave my car in the driveway lol

@TheAutoDIYGuy 7 жыл бұрын

That seems very odd! Maybe the kit you bought is defective with regards to the rfid sensor. Did you get the one which I linked in the description? Or one from a different manufacturer? I would suggest contacting them, as unfortunately I can't think of what could be causing an inconsistent problem like that. Maybe there's a short on the board where the rfid ring connects to. I would be very interested to know what they say.

@rutledgeking7652 7 жыл бұрын

I bought a kit like yours I'm trying to install on my 2005 yamaha r6 think I can make it work

@TheAutoDIYGuy 7 жыл бұрын

that sounds awesome man! Let me know how it goes

@rishimodi6114 7 жыл бұрын

The Auto DIY Guy &gugughh

@JJ-me8dc 7 жыл бұрын

Hello Bro, I am a automobile modification enthusiast... I have done the installation as well for the start stop button, its an Indian car though... Awesome Video though bro... I have seen the comments and i can see that there are people facing issues with immobilizer.... I have bypassed it in a very simple way... And the steering lock as well is been bypassed in a simple way... Please feel free to contact, i would reply as soon as possible... Thanks.... I would reply to the messages who are facing challenges in doing so and THE AUTO DIY GUY keep doing mods.....

@jefersonpaz3863 7 жыл бұрын

Yogesh Bobade hey bro how do you bypass the immobilizer I'm having problems here :\

@JJ-me8dc 7 жыл бұрын

Hi Jefferson Bro i need to know some details about your car can you tell me the model of the car, because basically the immobilizer is a ring which is been placed around the assembly where the key is been inserted to turn on the car...Do you have a black ring around the key assembly please check and let me know..

@jefersonpaz3863 7 жыл бұрын

Yogesh Bobade actually I just found a way to fix that last night but I'm still stuck with the shifter it's lock I still need to put the key in. its a 2001 chevrolet tahoe

@JJ-me8dc 7 жыл бұрын

Hi Jeff bro..Please tell me do you have to keep your key in "ON" position if "NO" then ,, You would have to cut the key and keep the key in the key assembly and you would have to keep the other part near the immobilizer ring so as to avoid the issues of immobilizer.. please note that key should be only inserted don't keep in "ACC or ON" condition let the push start button do its job of turning on accessories and turning the car on..When you have just inserted the key in the key assembly it would automatically unlock the shifter when the car is started through start stop button..Let me know if this helped you...

@titosalinas393 6 жыл бұрын

This is no joke the best video on youtube there is no other video that gets into detail like this

@TheAutoDIYGuy 6 жыл бұрын

Thank you! That really means a lot! :D

@kelvinandersonel1132 8 жыл бұрын

I pushed and held it long enough to start it but I was scared I may damage the starter. I will try again in the morning and let you know how it goes. Thanx for the response

@ijible 8 жыл бұрын

If it keeps cranking and doesn't start try double checking your ignition wires with a multimeter. Compare how the key powers them on and off during crank with how the module does it. You may have ignition and accessory wires reversed.

@mj1reyes 7 жыл бұрын

You sound like a Trini 🇹🇹🇹🇹🇹🇹 good job bro if you are indeed from Trinidad maybe you can help me connect this to my Legacy GT

@TheAutoDIYGuy 7 жыл бұрын

MJ Reyes-Williams haha yeah man...what year is it? Shoot me an email when you ready paulsamaroo@gmail.com

@alanbirsingh7163 7 жыл бұрын

The Auto DIY Guy started up the video and was pleasantly surprised to hear the accent

@dass216 7 жыл бұрын

The Auto DIY Guy oi! You did this with any local civics? Mines have a chip in key have a bad ignition cylinder want t to use this instead , save a lot of money vs buying new cylinder entire assembly costin real money

@TheAutoDIYGuy 7 жыл бұрын

Daryl gonzalez hey man... What year is the civic? Might have to try and see if a universal immobilizer bypass module will work with that chipped key first. What I would suggest is to check the description, get the bypass module and push to start kit, and then email me when you're ready to discuss. :) Paulsamaroo@gmail.com

@squidzelwashington6 6 жыл бұрын

In some cars you can pop the button pad off and there is usually a hidden key in the remote that you can use to turn

@Okanagan48 8 жыл бұрын

A nice little project for big red.

@TheAussieStig30 7 жыл бұрын

This is really cool, I saw a guy do one with an arduino before this one, but I prefer this kit. I wonder how hard it would be to have the car unlock automatically when you walk toward it.... I think I'll install one of these in my car, it's a 2007 but it's got basically no bells or whistles, I'm adding Bluetooth to it now to make it a bit easier instead of connecting cables all the time. I really do like this though, if I could fit it somewhere convenient, I would do it. I really like the RFID tag too, makes it much safer.

@johnjkizer6399 7 жыл бұрын

Hey what's up Auto DIY Guy, I love the videos you make they are very informative and well as money saving, keep making more videos. Thank you so much, I'm thinking about putting a push start. God Bless

@sutkeiadam4610 5 ай бұрын

Hi. Really nice idea. My ignitio nkey won't work properly, just in one position start the engine. I have the same car as you have, but it's a wagon. The central lock key is on the ignition key and also there is an Immobilezer. Should be the key in the key hole? Or this system can handle the whole thing? Thanks for your advice.

@blackincawston Жыл бұрын

Amazing. Now I will install in my 6.5 Silverado. Thank you

@V-TecHondaLove 6 жыл бұрын

Nice job bro! Very clean installation... I'm thinking of getting one of these for my 8th gen Accord..

@evocre8r 7 жыл бұрын

Awesome tutorial! Gonna order the kit and do this mod asap.

@TheAutoDIYGuy 7 жыл бұрын

Awesome! good luck!

@neilpaterson2240 7 жыл бұрын

two questions 1 what do you do with acc wire if switch has no acc position? 2 is the brake signal 12v or ground? thanks great video

@luisloks 7 жыл бұрын

1, my best guess would be to research, find and wire it up with the wire that gives power to the radio and accesories. while the car is still off( might have to consult with a shop if you are unsure which cable could be used instead of acc). if there is not other wire, then a good option would just be to wire it up to the 12v from ignition 2 that comes on when the car is on but off when vehicle is turned off. 2.the brake signal is easy enough to identify, get an multimeter that lets you know polarity then on your brake light pedal on top there is a switch. put the multimeter red lead on it and the negative to a metal part. then push the brake. if the multimeter shows 12v, and it shows correct polarity then its odviously 12 volt at the switch. get a good diagram for your vehicle , a multimeter then do it very carefully, this is not a type of job to be rushing into, especially if you are asking around about what kinda of polarity is the brake signal on.

@TheAutoDIYGuy 7 жыл бұрын

+Neil Paterson 1) the ignition barrel of your vehicle has no ACC position? 2) the brake signal is 12V.

@JJ-me8dc 7 жыл бұрын

Have you tried to take a look at the key assembly and the socket to which the assembly is connected,,how much wires are present in the socket??????... And how do you switch on your accessories????Cant you switch on the radio without turning your car on ????

@munteanurobertmihail8691 7 жыл бұрын

I have a Kia Pro'Ceed from 2008 and I'm looking to install one of these toys. I checked on the net în many forums about this item and on most of them the guys still use the contact key together with the RFID.

@rosalynaguas7893 7 жыл бұрын

Is the RFID Tag "exclusive" for your system? If I installed the "Push Start System" to my 2 cars . . . can I interchange the RFID Tag to activate any of my cars with the same system? . . . Great Tutorial.

@luisloks 7 жыл бұрын

rfid tags are "coded" cars, so they should not be able to function for both systems. but what you can do is get one of those places that copies rfid tags and just "fuse" your tags toguether so that both will be present in either car and each system will id the tag it needs to. Also you can try to contact the chinese manufacturer and maybe they will be able to program two systems with the same rfid's , for an extra charge of course.

@lordrussell666 6 жыл бұрын

great job on this video on how to explain this better then most others have. I am now wanting to do this to my 2007 chevy equinox now thanks for the know how

@TheAutoDIYGuy 6 жыл бұрын

haha awesome! Make sure and do your research, and good luck! Let me know how it goes.

@lordrussell666 6 жыл бұрын

thanks i sure will after i get everything needed for it when i am all done :)

@Big_Juda 6 жыл бұрын

nice job bro definitely more effective than M.C.M.

@juniorrodriguez5125 7 жыл бұрын

Suggestion why not use the connector plug rather than splicing the wire? It would look neater.

@sonyking6417 6 жыл бұрын

Very helpful video and easy installation Thnku Sir can you make one video full introduction how to install normal steering wheel to update radio button control steering in hyundai accent 2003 to top model like to 2012, 2014, 2016 or any old car normal steering wheel to update radio button control steering wheel Sry for my bad English

@logancox2486 7 жыл бұрын

Great video. Very thorough.

@tomaszjasinski5562 7 жыл бұрын

Awesome video. patient and detailed instructions. just what I needed. thank you for taking the time to help your fellow car DIYers :)

@TheAutoDIYGuy 7 жыл бұрын

Thank you very much for the kind comments! I'm happy to have helped in some way 😁

@kelvinLee.L 8 жыл бұрын

hi there. I bought exact same system like yours. mine seems to need longer time to start. if using back key to start the engine, engine will start easily.

@luisloks 7 жыл бұрын

DAMN brah you da boss. that thing is sick, great way to modernize a reliable old friend. quick questions, is there a way to add an led light to the system so that it would blink when system is armed and not blink when disarmed? or does the push start button led do that instead?

@TheAutoDIYGuy 7 жыл бұрын

Ll Lock from what I know... It only lights when it is disarmed (that is... When it detects the rfid tag).

@luisloks 7 жыл бұрын

The Auto DIY Guy cool, thanks DIY man.

@luisloks 7 жыл бұрын

hey DIY guy, i bought the unit, do you happen to know how it detects when the engine is on? so it stops turning the starter. there isn't anything in the manual and i am just wondering. I mean there is not rpm sense wire or anything of that matter in the box so kinda curious.

@TheAutoDIYGuy 7 жыл бұрын

Hey man...from what I know, these kits usually work on a timer. I believe you can adjust the timer according to the manual (this is off the top of my head since this was a while ago lol). I remember in the manual, it said that there was a button to press to configure it. In my case, when pressing the button (and NOT holding it down), it wouldn't crank enough. However, when pressing and holding the button, it works perfectly. Hope this helps!

@luisloks 7 жыл бұрын

The Auto DIY Guy yea. i get that. just finished installing and it works greeatttt and it looks and awesome. hoping u make some more vids. jaja. who knows maybe its time to include remote start on your ride.

@MrMr123 7 жыл бұрын

How did you mount the push button? You think that button could handle being mounted on a motorcycle? Btw great video

@amitbuch 5 жыл бұрын

Superb demo. Love details. I am inspired now.

@FabergeApple 8 жыл бұрын

Great information here buddy !!! Liked and subscribed :D

@paulsamaroo 8 жыл бұрын

+Aaron Bahadur Thank you sir! :D

@ryandewji3649 7 жыл бұрын

Love your vids, please make more! Maybe how to install an air horn set up or multi-horn set up.

@cadencemccumber5291 8 жыл бұрын

I have a 1999 Oldsmobile intrigue will this system work with my vehicle I've been looking everywhere for a video and yours is the best I've found so far really like that I won't have to have my keys in order to use the system, makes its seem like it came from factory with a push start.

@ijible 8 жыл бұрын

Yes, but you'll need to bypass your passloc 2 anti theft system. That'll require a module or someone who's good with relays and resistors.

@jonathancastillo2961 7 жыл бұрын

hey great video and step by step instructions. I do have one question what would have to be done differently with a car that has an immobilizer?

@romandise 5 жыл бұрын

that finger at the end of the video xD

@edwinptown 7 жыл бұрын

great tutorial

@LivingUnlabeled 6 жыл бұрын

1:44 such a small thumb needless to say, a well put together video. followed step by step, got it perfect :)

@TheAutoDIYGuy 6 жыл бұрын

NyoomBot 🤣 I think it looked so cuz I over extended it lmao... Glad you got through!

@AG-um9xi Жыл бұрын

Awesome video thanks for sharing your skills

@murahomesa 7 жыл бұрын

Good work Trini.

@kalani1963 7 жыл бұрын

link to vehicle wiring diagrams not working. please send new link. great video man.

@kennethcole6263 8 жыл бұрын

Nice job on that! Two questions: Where is the link to the car wiring diagrams and what brand is your kit?

@TheAutoDIYGuy 8 жыл бұрын

Thanks! All the links are in the description

@wissamabdalsamadyosif8234 6 жыл бұрын

Thanks for your response

@CinnamonCanine 6 жыл бұрын

Nice job! Nice and simple video to follow :)

@TheAutoDIYGuy 6 жыл бұрын

Cinnamon Wolf thanks bud 😊 you should check out the updated one... It's in the description. And i'm currently working on installing an even more feature packed alarm system. Stay tuned.

@Drrrre 3 жыл бұрын

I’m assuming the transmission is also locked in “park” by the position of the key barrel. If so, will this installation (barrel removed) allow a thief to shift the car into neutral and steer it away without any keys/fobs?

@bobbyomekam8043 3 жыл бұрын

Yep sure will 💀

@mikewhite8659 7 жыл бұрын

video on start/stop button for a 99 mercedes ml 320 how too.

@iwaramania 7 жыл бұрын

nice video bro.. please the ground wire you connected to the grounded part of the car where did it come from is it from the transponder and what happen to it after the whole connection is done does it remain there. THanks

@batteryone 7 жыл бұрын

Please show more clear which adapter needing to cut off after remove key barrel. Thanks alot.

@TheAutoDIYGuy 7 жыл бұрын

batteryone hey... It's the one that holds the ignition wires (12V constant, ACC wires, ON wires, and START wires) .

@PuTiBuNdO 7 жыл бұрын

I do have the same one system ready to be installed...by me of course... just one quick question, the break pedal switch is a (+) trigger or negative? my car is a manual transmission and required to press clutch to start, so can I skip or connect this green Break pedal switch to the Clutch switch and avoid to press both pedals at the same time?

@TheAutoDIYGuy 7 жыл бұрын

It's a positive trigger. So if the clutch switch outputs 12V when pressing it down, then you can use that instead of the brake switch wire :)

@atlantichardscape9642 7 жыл бұрын

If I install this on my dodge pick up can i still turn on the truck with the key even though I have a push start , yes or no. and great video man

@TheAutoDIYGuy 7 жыл бұрын

Yes you most definitely can, however, the major obstacle there would be that you would have to put the key in ACC position when using the button to start the car; because you would have to disable the steering lock in order to drive the car anywhere but straight ;)

@evoone3039 8 жыл бұрын

since u took out the key switch. all u have to do is use a pair of long nose pliers to start car with out the blue fob

@TheAutoDIYGuy 8 жыл бұрын

Remember, the I disabled the wiring harness to that part of the ignition system, and essentially "re-routed" it to the push to start system. So no, even if someone tried to turn it with a long pliers, it won't do anything :)

@rajatmahajan4173 7 жыл бұрын

Hey, it's a really nice video I wanted to know whether my central locking will work after installation of push button.

@ravenx5309 2 жыл бұрын

Mannnnnn that's some advanced wiring ish.. lol.. this would be extremely difficult for a regular dude 😎

@ImSafeonSite 7 жыл бұрын

Thank you Great Vid

@misaeltorres3707 7 жыл бұрын

could i install this in my mitsubishi outlander 2008

@MohanSingh-mw6bz 4 жыл бұрын

And what about steering lock ,does it works or not please tell me after installation the kit

@fuzz992 4 жыл бұрын

steering lock was removed in this video with the lock cylinder.

@evocre8r 7 жыл бұрын

Great video. You helped me out a lot. Do you happen you have the install manual? I threw mine away by accident and i would like to see how to install/cut my key and retain my factory alarm. Thanks!

@TheAutoDIYGuy 7 жыл бұрын

hey man, nope unfortunately I don't have it anymore. But the instructions just stated to use a spare key, turn it to ACC position, and then cut the head off.

@evocre8r 7 жыл бұрын

The Auto DIY Guy thanks bro. I did just that and everything works perfectly. Thanks!

@TheAutoDIYGuy 7 жыл бұрын

You're most welcome buddy! Take care.

@MrSporkster 7 жыл бұрын

So when you've removed the key barrel, you have no more steering lock?

@TheAutoDIYGuy 7 жыл бұрын

Correct, unfortunately :)

@leokalaitzis 7 жыл бұрын

Hello my friend will it work only as a simple start button?Without connecting the other wires?

@hibriddesign 7 жыл бұрын

That was wicked... Do you have any problems with the electrical noise generated when driving the car? Do you have any backup plan if the system goes down?

@tkkross4742 7 жыл бұрын

Sathya Narayanan your ignition switch will still work

@JJ-me8dc 7 жыл бұрын

Yes we would have a backup plan...

@JJ-me8dc 7 жыл бұрын

No noise problems

@veky1405 8 жыл бұрын

Awesome job with explanation and video together with written staff below video (website etc)! What about key ring around my ignition that's reading the code from my original key? Do you need to connect that as well and place you original key near by? Tnx

@ijible 8 жыл бұрын

Most of the time you'll be able to bypass that key code with a bypass kit. This will have to be installed in addition to the push button module. The type of kit and installation requirements depend on what car you have.

@veky1405 8 жыл бұрын

Thank you for that-though I'll need to put my second key somewhere near the ring receiver, probably below wheel plastics until I find a solution for it. I'm doing it on my Chrysler Crossfire and it's all made by Mercedes so it's making it harder, not to mention that there's no place to put anything inside the car so will be challenged to place that big plastic ring from the Push Start system on a good spot...

@ijible 8 жыл бұрын

+veky V Be careful, those cars can be tricky. There is also a chip you can buy that is tiny enough to hide under your steering wheel plastics. It will have to be programmed into your car's computer and wired to activate with your keyless starting unit. Your steering lock may also be electric so check to see if you can bypass or integrate it.

@charlesbarnes8753 7 жыл бұрын

Nice video. I plan on purchasing one soon. Planning on putting on 2011 Camry. How did you bypass the chip from key?

@TheAutoDIYGuy 7 жыл бұрын

Charles Barnes thanks! You'll need an immobilizer bypass module for your vehicle (it's on the website in the description). If it's either too expensive or difficult to acquire, then you can try using a universal one on Amazon. Just search "universal immobilizer bypass module". Good luck!

@charlesbarnes8753 7 жыл бұрын

Thanks truly appreciate it

@mesS794 3 жыл бұрын

Nice . How many wire have push button ? Can you tell purpose ofc wires. Ground, signal to box and power for light on button maybe ?

@abdelfattahelshekh6909 8 жыл бұрын

Good work. My car have an immobilizer,would this kit work for my car??? Or i have to buy another piece to make it work properly.

@ijible 8 жыл бұрын

Ramadan Kareem, Abdelfattah. You will need a bypass chip to allow your car to start. You'll need to visit your closest car starter shop and tell them the make, year and Model; they'll tell you what bypass you need and how much.

@abdelfattahelshekh6909 8 жыл бұрын

+ijible. Allah Akram🙂🙂🙂. Thanks for your reply.

@TalmidMichael 5 жыл бұрын

1:44 Woah! That thumb bro!!!

@TheAutoDIYGuy 5 жыл бұрын

M P over extended am I right? 😂

@nikkimeade8016 7 жыл бұрын

Hey there bud, Have a 93 Crown vic that has a broken actuator Pin behind my ignition barrel and in the steering column iself that will not allow me to turn off my car, haha literally have to uplug distributor to kill the engine and unplug the battery to keep from battery drain. would installing the push button start/stop make me able to turn off the vehicle both mechanically and electronically? Really need to info on this and would appreciate the hell out of a reply if you could spare one.

@williambray508 8 жыл бұрын

Also my car has two accessories for the ignition switch one and two in your expertise which one do you think I connect I have a 2016 Hyundai Elantra

@TheAutoDIYGuy 8 жыл бұрын

+William Bray Ahhh I see ...I referenced the wiring diagram on the website...and compared it to my push to start system. In your case, you would have to join the two ignition wires from the push to start system, and connect them to the single Ingition wire from your car. Next, for the Accessory wires, join the two Accessory wires from your car, and connect them to the single accessory wire from the push to start system. Good luck, and let me know how it goes!

@sebastianfry9188 5 жыл бұрын

Installed on my 95 Accord works wonderfully thank you but I’ve ran into an issue my blinkers no longer work any advice??????

@gilbertsibayan5328 7 жыл бұрын

after successful installation of push start button can I still use the manual key in case the push button fail?

@dsredz5689 7 жыл бұрын

sir the video is nice but I need the wiring diagram for Hyundai i10 which is not available in the website which u gave colour you please update with the wiring diagram for Hyundai i10 2015 model

@nikopriest6762 7 жыл бұрын

Deepak Hacker you can check BBBIndustries . com they may have for newer vehicles

@misaeltorres3707 7 жыл бұрын

could i install this to my outlander 2008 only using the brake

@keun2009 7 жыл бұрын

Good tutto my friend..!!!...now, can you explain me how to fix the botton on the dashboard??? TKS!!

@TheAutoDIYGuy 7 жыл бұрын

keun2009 haha thanks man! That's the reason why I put "dremel/drill" in the tools required section of the video; you will need to drill a hole smaller than the size of the start/stop button in your dashboard (wherever you choose), or mount it where the key barrel used to be. I hope this helps, and good luck!

@kelvinandersonel1132 8 жыл бұрын

Great video I used it to help install my push button.Only thing is mines didn't come with a RFID transponder so I picked a JHS motorcycle ID card lock. I own a 95 SC400 when I push the button the car tries to start but won't turn over. Could you possibly help me out with this?

@TheAutoDIYGuy 8 жыл бұрын

Does this happen even when you press and hold the button to start the car? In my case, the push to start kit doesn't crank enough unless I press and hold.

@TheAutoDIYGuy 8 жыл бұрын

I know that's there also a "teach mode" that came with my kit, however, I haven't bothered to look further into that yet.

@ijible 8 жыл бұрын

Could be your after market ID lock blocking the push button's starter wire. From what I can tell this RFID transponder is Chinese product only so I'm guessing the quality isn't 100%. If you had to cut the starter wire to install the ID lock then I would recommend you reconnect it and try the push button again. If it works then you know the problem is with the transponder.

@mattg2058 7 жыл бұрын

Great video to watch. I cannt tell that my transponder and RFID chirp/ communicate with each other. Is there a way I can find out?

@JJ-me8dc 7 жыл бұрын

Yes there is a way

@JJ-me8dc 7 жыл бұрын

what problem are you facing actually......

@chisco9218 7 жыл бұрын

Hi, there is the possibility that the car itself off accidentally press the button?, or that insurance flywheel once put on the car?

@kihyunwhitaker8391 4 жыл бұрын

Im guessing the black box is the transponder in this case? And if so would this be a good replacement for a defective or broken transponder antenna?

@JoJo603060 5 жыл бұрын

Awesome install video.. triple thumbs up👍👍👍

@robertquiambao5604 7 жыл бұрын

Hi how can i improve my RFID? say can we make detection range more further? coz everytime i need to bring the tag very close to the rfid ring maybe theres a way you dont need to do that instead once you get inside the car it already detects the RFID Tag without bringing it closer to the ring sensor? Thank you

@luisloks 7 жыл бұрын

Robert Quiambao the range for the rfid reader can not be increased without further more complicated and more money investment. there are alarms that do what u want but this is not it. the only thing that i would reconmend would be to place the ring where ur pocket is. the pocket where u put the keys always in that pocket so that everytime u sit, the ring will read the rfid tag automatically.

@mauriciomagnovska8840 7 жыл бұрын

Robert Quiambao there passive keyless entry witch works like you want, i snstalled a cardot brand that costed me $125 on ebay

@gilbertsibayan5328 7 жыл бұрын

Can I install it to my 2008 Honda Civic with immobilizer chip in the key? hoping for your reply, many thanks...

@oluwaseunakintola8599 7 жыл бұрын

@TheAutoDIYGuy: I did the install on my 2006 Chrysler 300 by following the instructions in the video. My car starts the shuts off immediately. what am i doing wrong?

@CadeKnight60 7 жыл бұрын

Hi! Installed this on my 2000 Dodge Durango and it all works perfectly. My car start and idles fine but when I give it gas my car will die? Not sure what is going on. Maybe someone will know on here! Thanks!

@truatlazn404 4 жыл бұрын

Would I need a bypass immobilizer for this push start I have a Lexus is300 2001

@YAMIYAD 6 жыл бұрын

Its not keyless entry? You opend your car with the keys. But can it be ketless entry to?

@TheAutoDIYGuy 6 жыл бұрын

Jan Jaap here you go 😉 kzfaq.info/get/bejne/h7pdi9B32quro6s.html

@briang7251 4 жыл бұрын

Hey nice work man and thanks for the video

@jeanpaulivan2007 7 жыл бұрын

Congratulations. 2009 honda jazj manual, is it feasible

@SankhaKelumDahanaggalaSKD 7 жыл бұрын

Can I do this with manual transmission vehicles? PS Your method is very very cool

@TheAutoDIYGuy 7 жыл бұрын

Absolutely...you'll just need to make sure and press the clutch + brake before pressing the button to start the car. PS Thank you! :)

@SankhaKelumDahanaggalaSKD 7 жыл бұрын

Thanks!! One more question plz, can I start with the original key too? If so plz can you send me a link to buy it? Amazon's gone. Thanks again!

@shivconstruction4757 6 жыл бұрын

Nice and perfect video to Better understand .....👍

@devpar1897 3 жыл бұрын

What do you do when this system fails? I mean, the way how it works right now, it looks like the key is no longer in play. Which means that the user is totally dependent on the new Push to Start/Stop system. So, if the system fails, how does one start their car since it no longer has the key barrel to start manually?

@Pineapplxpress0 3 жыл бұрын

I would recommend if you like the push start system to get another one incase it fails you can just plug the new box in.

@dingdong-mi7hp 4 жыл бұрын

installed the device as per your instruction but have one problem, my radio, cigarette lighter, and led clock does not turn off with the engine, key needs to be in the lock position to turn off. any solutions. thanks in advance for your reply

@rhettdopwell9367 6 жыл бұрын

Nice videos. Wish there was a way to keep the lock. Also do you have to hold down the button or can you press it like original push to start? One suggestion for my tastes is that I like to make mods reversible so I probably would not cut off any original harnesses and make sure I keep parts like the lock in a safe place just in case when I am selling the car the buyer wants original stuff back.

@TheAutoDIYGuy 6 жыл бұрын

Rhett Dopwell you can press the button like a regular push to start, but usually when the engine is cold, it would need a bit longer crank to start, so that's when you would press and hold. Also, yes, I do keep my original stuff as well 😉, but who knows... Maybe a start stop button might make the car have a more appealing look 😅

@truatlazn404 4 жыл бұрын

Will this work on a Lexus is300 2001 so I have to remove the key barrel as well so I can drive