You are genius. The only person to explain the cable path. Thanks so much

THANK YOU! You explained how to do the install clearly and without a lot of personal banter... some people get caught up in hearing themselves talk rather than cutting to the chase and helping us non-handy people out! BIG THUMBS UP!

You have the talent to explain with clarity.

Definitely the best Dyson wall mount installation instructions on KZfaq. Thank you for sharing with the world!

The best video on how to install a wall mount for Dyson. I gave him 100 out of 100.

Thank you for this video-for the life of me, I couldn’t figure out how to fit the charging piece in until you showed to open it first!!

Everyone said Dyson wall mount and showed how it pierced the wall. You explained in detail how to place the charging cable and charging port 🤩 Thank you very much, exactly the video I was looking for👏.

Thank you so much you saved my evening

Big shout out to Dyson for having this in the instructions that came with the vacuum ........NOT ! ! Thanks Tom

Great video, straight to the point and clearly explained. Thank you 😀

Great video, followed your instructions, went perfectly. Thank you!!

Thank you! There is no way I would have figured that out from the instructions. This video was what I needed!

OMG !!, thank you so much for this video, very well explained. You go right into the the topic, I've been looking for instructions on this installation but none like yours. Thanks again !

They need a link to this video on the actual Dyson manual because their video was 💩. Thank you sir!

Lol if it wasn’t for your video I would have never did this. I didn’t know you needed to push the charger so hard up the little nozzle tube for your charger. Thank you

Thanks so much for the detailed video of putting the plug in the dock. I liked how you hung the long bit to the size to use the wall space you have super clear and simple super duper 🥳

Many thanks for the video. I way scratching my head. From Cyprus

So helpful since an otherwise useful product fails to explain clearly what you managed to demonstrate. Cheers!

Thank you the best explanation on KZfaq.

Thank you. I was stuck at this step.

Yep, I had it upside down. Makes a lot more sense now 😂

Thank you! the instructions were really hard to follow!

Amazing explanation. Thank you

Awesome video! Question - how did you know how big of a hole to make for the anchors? Sorry if that’s a dumb question, just moved into my first apartment!

Great video although I wish someone would discuss how to find a stud in a wall and even making initial hole and what anchors even are 😔

great video. just fitted my charging dock into garage wall as instructed. Thx.

Nice little setup.

Yeah the actual drilling of the holes and what to use and what is an anchor, etc...is what is needed

Thanks so much for this!

Thanks for the gr8 detailed video Tom. Do you need to screw into studs or is the drywall sufficient? It appears like the drywall will hold since you didn't mention anything about finding the studs. Since it is just drywall, can you use a hand held screw driver or do you need a drill? That is a good idea to mount it in the laundry room with just the base. The Dyson video show the mount with the entire leg attached to the mount on the wall. That is nice bcuz everything is all together, however, it takes up more space and it's not as easy to mount it next to an outlet in a more confined space like next to a washer or dryer. You could fit the charging base next to an outlet better with only having the base mounted and I guess just store the leg somewhere else.

Thank you from France 👌🏽

Thank you for this video!

Looking for some advice: With a wireless vacuum, would you install the mount high enough for the vacuum to be resting solely on the mount, or would it be best to have the base of the vacuum resting on the floor to take some of the weight off the mount? My bf just installed our mount but it's high up enough the vacuum isn't touching the ground and all its weight relies on the mount. I am pretty nervous about it falling because I have a cat. I have been watching countless videos and searching Google but haven't found an answer yet. Is there anyone who could give some advice, or suggest an additional way to secure it as I'm not sure if this mount required double sided tape and if so-I would assume it can't be re-mounted with out it...

Well done, brilliant video, thanks

Omgosh thank you so much! I totally was going to screw it on the wall and have the cord hang from the side haha

Thank you!

Thank you for the great instructions!!

Thank you very much for this video ! 👍👍👍

you are a gem. thank you.

Thank you very much

Thanks!!! I haven’t bought one yet but I’m planning to. I just don’t know where I’m going to put it. How much space does it need to be away from the wall? I’m thinking I could potentially put it behind a door… But I may not have enough space. I’d sure like to know how much space is needed for the Dyson docking station

Thank you so much!!!

Should I use a longer screw or shorter

The light on my one doesn't come on. When it's in the charger.

thank you very much for this video.

Thanks Tom!

Thank you. You saved a marriage

I wish this showed the anchor installation ☹️

Where did you buy your wall anchor (red) from? I need this for some of the other components. Great video!

Thank you! :)

Thanks Tom, great video.. My V-8 came with studs (as you used) and screws. Is it really necessary to use the studs if I am screwing into a stud? Thanks in advance.

I installed the wall mount for my Dyson V11 Torque Drive vacuum using just the screws and not the anchors. However, there is no stud behind the wall and while I am able to mount the canister and a small tool, the top of the mount is just a tad away from the wall. I am concerned about whether this will hold. Has anyone else installed a wall mount without the anchors/stud and was the wall mount able to adhere to the wall and not break away?

Thank you for the video. What screws do you recommend to use?

Lost the screws in my move and I don't want to take the mount to the hardware store. What size screws did you use? All my inventory screws are too fat.

Thanks!

You skipped the most important part about installing it on the wall. What size bit did you use for the supplied wall anchors?

Is it just me, or are the mounting screws that come with the V8 way too long? Like, dangerously long? I'm afraid I'm going to hit a wire or a water pipe or something!

Mine was screws missing. Called Dyson but sent me much smaller screws. Did you buy screws sperately?

Awesome - cheers mate!

hi, does it come with 2 chargers in case you want to use the wall charger or charge it away from the wall mount? if only one charger and you do the wall mount sounds like you are always stuck using the wall mount since you can't remove the charger cord once mount is screwed into the wall.

Thanks for the video. Do you recall if the screws were provided with the vacuum?

Were screws/rawlplugs included for you guys? I couldn't find them.

Can I set up this dock on a wood closet? Do I still need anchors for it?

Mine was nice and secure for months until it got very lose I used bigger plugs and still no good.... please help 😬

What a legend

Thank you. I was looking to buy this exact wall mount from eBay. Do you know if this will fit with my DC34? The eBay listing doesn't include my DC34 model in the compatibility list, but the DC34 looks almost the exact same as the V6 V7 V8.

Do you need to put in studs only?

So- am I the only one who is concerned about it reaching full battery but it’s still plugged in?! I was about to mount the wall hanger-but of course this thought came to mind. I just prefer that I disconnect the charger from the vacuum once it’s reached full charge. I’m guessing I can just pop out the charger head once I see it’s reached full battery? Anyone do this? Or ???

Does it have to be in the stud ?

thank you so much ;)

All these videos skip the actual drilling and anchor parts and that’s what people need to see

Easy to fit the plug, nightmare to get it back out!

What size screws did you use?

Done!

I have a v8 model with no screws or anchors. Do you know what size to use? Thanks.

Sorry to point this out but you have installed it the wrong way around. The cups at the end go on top to store attachments.

Dyson !! If i knew i have to screw by myself station to the wall i will buy other model of vacuum!! Big NO ! And no parts inside as well to do this !

That must be the cheapest stand very little money can . What a fail

Thank you!