If you are tired of buying throw away vacuums and you are interested in buying a good quality vacuum that can last you up to 20 years please reach out to me at 3214543838. I like to spend time asking questions to my customers to find out what is the best product for their needs. I care about maintaining the trust of my customers so I always give honest answers to questions and I know my products well. I can ship anywhere in the country. Hope to hear from you!

hey man, thanks for this vid i accidentally popped out the plastic waste catcher part of the vacuum and couldn’t get it back in and this helped me click it back into place 😅 saved me from my mom, thanks dude

I fancy myself good at fixing things but I couldn't have done it without you. Excellent video and thank you very much for your detailed explanation!! As a previous viewer commented, putting the vacuum back together is key!!

Oh my God I want to thank you so so much you are awesome. You’re amazing. I had taken mine apart and then I had to watch a video how to put it back. Thank you so much. It helped me tremendously and you made it so easy.

Thank you 😊 My vacuum wasn’t working for a month, but due to this video I was able to fix it !🤗

Fantastic video!! Thank you for taking the time to do this. You saved my V8 from the trash heap!

Oh my God I want to thank you so so much you are awesome. You’re amazing. I had taken mine apart and then I had to watch a video how to put it back. Thank you so much.

Thank you so much for this video...I was just looking for cleaning the post motor filter, and then saw this, with how to remove the bin to wash it (which I had never known how to either!), and found I could clean the whole lot! We live on a dirt road - so much dirt and grit now no longer living in my machine! I am sure it will work so much better!! Thank you again.

Thank you so much for this! I recently purchased a used Dyson V8, and every time I used it it smelled AWFUL. Cleaning it out made such a big difference! Great video, very easy to follow along.

Thank you for your efforts. I've cleaned both my V6 and VI following your videos. Really appreciate it.

Thank you for taking the time to run through this so concisely 👍

Thank you so much for posting this!!! I got a free Dyson from someone in my neighborhood because they said it didn’t work. Followed your video and it works like new now!!

Thank you so much!!! I had done the usual disassembly and cleaning, but after putting it back together, there seemed to be a lot of fine dust continuing to emanate from the cyclone and collecting in the bin, (which is a real drag after spending considerable time cleaning it). And I was thinking if only I knew how to open up the cyclone to see where the dust was coming from. And here you are! Very much appreciated!

Thans very much for this awesome video. I almost thrown away my v8 and bought a new one. The suction was really degraded, until it became completely unusable. Thanks to your thorough video I was able to clean it and restore it to a new condition. Thanks again!

Thank you for taking the time to create your amazing video! I thought I broke this unit when it dropped on the floor and came apart. Thank you fo r showing me how to put it back together. I’m so relieved!!

A very detailed teardown of the main dirt magnet parts of the vacuum. Many thanks for the content.

Many thanks. I got careless and sucked some water into my V8 Animal. It mixed with the accumulated dust and formed a paste that shut it down (made the pulsing you mentioned). I almost ordered a replacement vacuum but decided to do a little research and found this post. Very easy to follow, and I already had a set of torx bits, so I figured all I had to risk would be an hour of my time. All went well. I tore up the edge more than you did separating 5 clips between the inner and outer plastic housings, but it had no impact on function, and fortunately, that's as far as I needed to go.

Thank you so much, I somehow dislodged the dust bin from the motor when emptying it, I watched your video and it just clicked back in after your suggestion on how to line it up

Hello, wanted to thank you for taking the time to make the video. My V8 smelled so bad I was almost ready to throw that out and buy a new one! Your video saved it! among all the youtube Dyson videos I found yours the most helpful and easy to follow. Thanks again!

Helpful thanks. Didn’t have long enough screwdriver to release last pieces but apart from that it really helped me be able to clean the dust out from decorating. The bit with the flathead screwdriver didn’t come out at all result like yours so got a few jabs in the plastic 🙈. It’s now reassembled and charging 🤞it all works tomorrow 😁

An excellent video. Thanks for making and posting it! An added bonus for me (with hearing difficulty) is that your video doesn't have rock music in the background and I can hearing every word you said!

My Dyson v8 suck some water and this video was REALY usefull for dissasemble and clean it. Thank you for your work!

The rest of the story: I called Dyson twice re my lid off of the cannister. Initially it was suggested I view a video they would send to me. It was useless. Second time: I was told that lid should NEVER come off & if it does the cannister needs to be replaced. As she interacted with the tech & returned with his clear answer that is could NOT be put back, I waited til she was finished. While on hold I fiddled, again, with this knowledge about the tabs that you pointed out. . Presto, it worked! After her dire news I shared how it is in & working. Wrong response! She did warn me that this was just temporary.

Excellent video. I purchase Dysons at my local Goodwill when I can find them. Your videos have helped me clean them up so they are useable in my home. Even when I buy them without a charger, I use my existing charger to charge the compatible vacuums. The fact that you REassemble is key. I can take them apart, but I’m horrible and putting them back together. In some instances I write the screw size on the unit with a Sharpie to remind myself.

Thank you watching this video helped me very much

Thank you for this excellent video. Really good camera work. You showed all the tricky steps so that it was easy to follow. Much appreciated.

THANK YOU!!! I appreciate your clear communication and very good videoing! You're video just saved me from an hour of frustration!

Thank you soooo much for this tutorial it really helped me with putting my bin back in I thought I was going to have to eeturn it. Continue to do good work. God bless you!

Thanks! Finally I'm able to tear down and clean my V7 safely.

Thank you very much! My unit was stinking to high heaven and it was quite non-obvious to me how the heck to take it apart. I’m not sure how many times I can take that screen off, but the rest of it I can see happening on a regular basis for years to come. I’m very careful to line up with the previous original thread when I put the screws back in, So that should last a long time.There’s only so much dog dander you can vacuum up before these things start to smell. I bet a lot of people just throw them away!

This is perfect! I am new to Dyson. This makes maintaining it much esier.

Thank you so much for going to the trouble of doing this. You're a bloody legend!

This was very valuable, mostly figured it out apart from the bit with clips. What you didn’t take apart is the bit with motor - that I would love to clean too

Thanks so much for this video. I just received a refurbished one from eBay and man was it dirty inside. So I wanted to make sure it was completely cleaned out.

thank you, your video gave our v8 a stay of execution.. A new battery, new filters, and thorough cleaning (dusting ) seemed to solve the pulsing though occasionally was still doing it .. not sure if a factor, but with an aftermarket rear filter, two I bought seemed that they were causing a pulsing, so pulled out a newish Dyson brand filter (we had three V8s) this is the last one standing,. The pulsing went away for a month or so, but returned,so watched your video, deep cleaned .. we shall see .. not buying Dysons again .. seems the lifespan is approximately 2-3 years, so we reverted to a cheap corded stick we brought for cabin, that and a built-in system.. one other thing, many buy new vac etc. for new houses or post renovation.. watch out, plaster and drywall gyprock dust kills vacuums.. especially if the forced air system was not cleaned out post handover ..

I saw in a earlier film (not by you) that is was possible so I did it. Now I have to order a new one. Thanks a lot for your help.

Thank you for making it super clear concise!

My first 👍 and comment goes to this walkthorough, what a life saver. Thank You Very Much!

Thank you. I think the hardest part is putting the cup back in. Mind you, I did not do a total strip down of this vac but I did take the 3 main parts apart. Couldn't get the darn cup back in. Very hepful!

Thanks for the video. I’m watching it because I’ve got a very bad smell everytime I use it. Had to strip it apart to give it a good clean

Thank you for the video- helped me fix my vacuum!

Thankyou for your informative video... Helped me get that bin/canister reinstalled! Mick

Brilliant using this to do a deep clean on my dyson to sell 🙂

Thank you Richard! It was easy to follow

thank you so much for this video It is exactly what I needed

Hey thank you for this! Great walkthrough - I had sucked up some rice and some water and then hadn’t emptied the bin and it had gotten all gunky and smelly inside, tearing this down to do a proper clean and reassembling - it’s all back to normal now!! Definitely found removing the cylindrical filter (wedging the flathead screwdriver around the edges) to be the toughest part, was scared of breaking it, but managed to eventually pry it off! Appreciate this and thank you!

Great video , helped me no end 👍

Excellent V8 tutorial.

his is very useful to clean the dyson V8 I bought as spares, now I have 2 working machines

Great instructional video!

Perfect well made video! Thank you, sir. 🍻

awesome video dude thanks! 😊🙏

Wow! Thank you so much.... I clean for a living and pretty much figured it out but I was afraid I’d break something. This gave me confidence I wasn’t going to mess up

Thanks very helpful

Thanks for the video!🤠👍

Thank you!

Thanks for not ranting for 5 minutes, good how to vid.

Thank so much your video. ❤

This video is perfect. thank you

This was about as clean and straightforward as a tutorial can get - I wouldn't change a thing. Question for you, my V8 seems to hold most of the dirt in the cyclone area. I have pulled it apart and washed each piece with soap, water, and a pipe cleaner. Have you seen/fixed this issue before? My last resort will be to apply a spray-on wax to the disassembled parts to reduce friction. Keep up the great work.

Thank you........... You made my day

Pulsing is also a sign the middle filter is clogged and needs washing. But yeah, any kind of clog causes it to pulse on and off.

Thanks you very much

Thanks for making this video

Yes thank you!!!!

All good thanks.

5-star video!

Pro tip. Wear you some gloves. Vacuums pick up lots of things, many of them, like glass dust, don’t jive with skin. Thanks for the breakdown and reassembly tips!

Thank youuuu GOD Bless🙏🏼❤️

What a brilliant video. I am now the Dyson Technician in my house !! - please keep doing these - brilliant.

thanks you saved me

Great video. Can you recommend a replacement battery for this mode. The genuine ones are really expensive.

Thank you I thought I broke it but this video showed me it wasnt!!!

Very useful video. May I ask if the parts can be washed? Not the motor, obviously.

This video was a way faster way to know how to emty the dust bin, then try to read the intructions. Thanks.

Hello! When I pull up on the lever to empty the bin, it gets stuck. I’ve tried pulling it out as well by pressing the res buttons inside and that doesn’t work. It’s stuck rigid. Any tips?

thank you so much for this detailed video! unfortunately when I was putting mine back together i think I did something wrong, because now it's very difficult to empty the dustbin :(( the red garbage tab doesn't slide out smoothly at all, it's a real struggle. do you maybe know what I did or how to find out/fix it?

I loved the tutelage! However, what I was looking for you did not cover (probably because no one else has had this issue!) I don't clearly know how I had done this. Putting the vacuum into its charger the dirt cup's lid (that keeps the dirt in place) popped off. How the Hey can I get it back in place without cracking the lid?

My v8 has star/Torx screws. I'm thinking maybe because it's refurbished, since no videos I've watched have mentioned it. If you find yourself in the same situation, you can use a flat head screwdriver or a hex key/allen wrench, but they have to be the exact same size. good luck.

Brilliant video! What brand is your electric screwdriver? Love it and want the same

After reinstalling the dirt cup there is some resistance when lifting the cyclone component. Any thoughts to what may cause this?

My little red flapper is off and can’t get it back in. Any tips? :) thanks!

Sorry if there is some confusion on the differences between the V6/V7/V8. I honestly could have sworn that I have worked on some models that had V7 on them that were identical to the V6. Currently the V7 and V8 are identical in regards to the cyclone and dirt cup. If anyone has a V7 that is NOT identical to the one in this video I would love to know! :)

Great video. Do you know how to remove the nozzle from clear bin?

how you open the V7 motorhead post filter , its hard for to open it or to twist it (unclock wise)

Richard how do you clean the Bleu filter?...

this is crazy difficult! i’m not getting one. too many parts for me to handle. good luck to all of you ✌🏼

Dude thanks , did u just use torx driver t10 ? Or also used t15 and t8? Thanks in advance Respect from Turkey🇹🇷

Can you help? I have a Dyson V7 and the trigger switch quit working. It runs constantly. Weird thing is the light comes on when I pull the switch and goes out when I release it. However, the engine will not shut off. I had to pull the battery to finally turn it off.

Hi! my v8 vacuum does not release the container to remove the garbage, it got stuck and could not release it, what can I do?

Hi Can the small flap inside the suction spout be replaced or will I need to replace the whole bin?

Your the man !! Thank u so much for making this video Please start a cash app

What’s the torx bit size u are using for <a href="#" class="seekto" data-time="325">5:25</a>? My smallest is a size 10

How do you remove the red parts from the bin? There is one screw but can't get it off the clips.

I would gladly pay you to help me with this problem I have the same machine you just tore down and it has a flapper that opens up and that’s where the debris falls out. It’s clear plastic flapper and it fell apart and I cannot get that clear plastic bottom the snap back in and I’m scared if I force it I’m gonna break off the plastic tooth that goes in a grooveof the canister part that holds all the junk and any suggestions

Nice. but you did not show how to get into the motor part. My motor is stuck

Is the screen on the cyclone washable on the V7?

Hello I’m currently working on a v8 Dyson fluffy and when I hook up the attachments the roller heads won’t spin but it’s sucks just fine, any ideas?

What's the electric screwdriver you used do you have a link for it pls thank you

Lol where's the motor? That thing works by magic lol!😳