In this video I install a new Whirlpool microhood. It’s a simple job and only requires a few tools and a helper.
Пікірлер: 41
@shademe15 күн бұрын
Thank you for sharing I appreciate you. I just needed a refresher it's been 12yrs since c I mounted the last 1.
@NashwaukSteve15 күн бұрын
Thanks for watching and commenting!
@slobodanvasic747320 күн бұрын
Thanks for sharing this video. You do great job and help us. 👏👏👏👍🏻👍🏻👍🏻
@ejstapleton73797 ай бұрын
Excellent video. Thanks so much for your help!!
@NashwaukSteve7 ай бұрын
Glad it helped!
@joseaguilar6822Ай бұрын
thanks a lot, did it by myself was a little tough to hold up but this vid made it so easy👏🏽👏🏽👏🏽
@NashwaukSteveАй бұрын
Glad it helped! Good job and thanks for the comment!
@user-wp3hi4qd6xАй бұрын
Extremely helpful. Thank you for sharing.
@NashwaukSteveАй бұрын
You're very welcome! I’m happy to hear it helped!
@samdreamx20053 ай бұрын
Very helpful video. Thanks alot
@NashwaukSteve3 ай бұрын
Thanks for watching!
@davidgood107219 күн бұрын
Thank you!!!!
@JORDANJUNCTION19692 ай бұрын
Ty. We'll done. Just grabbed one.
@NashwaukSteveАй бұрын
I Hope thé install goes (or went) well for you!
@insidethreewide7133Ай бұрын
Thank you for this video! I too have a GE microwave that I will be replacing with this same exact unit. As you indicated the hole for the power supply cord is in a different location. You dropped your install down a half inch or so and were able to use the same hole. Do you think you would of had enough space to reroute the cord if the unit was installed in the standard location? I don't have the proper bit size to drill the hole and would have to buy a paddle bit to drill the new hole. Thank you for this excellent video!!
@KristineMessumАй бұрын
How deep are the cabinets here without the door?
@susangeorge67827 ай бұрын
You mentioned that this is going to be a recirculating vent. Where does this unit vent? On the front, sides, top?
@NashwaukSteve7 ай бұрын
Hello- it blows out of the top, right behind the door seam. So the microwave needs to sit out about 1.5” to keep that vent clear. Good luck!
@alextostenson8387 ай бұрын
What do you call the piece of metal you used to wrap the 2 x 4? I’m not sure what to look for.
@NashwaukSteve7 ай бұрын
Look at the IKEA NYTTIG piece. That’s what I originally had and took the metal from. Otherwise any box home improvement store will sell sheets or rolls of stainless or galvanized steel. Bending it might be the challenge though. Good luck!
@Prince_Jahvi_Joffer3 ай бұрын
I want to purchase this microwave however my current one that just went out has a circular vent at the top. Does this one have that option??
@NashwaukSteve3 ай бұрын
Just on memory now, I think it’s just a rectangular opening.
@zonykelАй бұрын
At 10:49 I see that there is a hole across the top of the microwave. When I first saw that, I thought it was missing a piece. So that's the way it comes?
@NashwaukSteveАй бұрын
Yep, that’s normal. It’s actually where the vent fan blows out, unless you install the exterior exhaust kit.
@veganfoodiecooks72823 ай бұрын
I bought this off of fb marketplace not knowing it was over the range type of microwave 😅 can i use this by placing it on the top of the fridge?
@NashwaukSteve3 ай бұрын
Yeah, it would work fine that way, but the bottom isn’t really made to support the microwave well. It might be wobbly up there. If you’re ok with that, it should perform just fine. Obviously the light and hood fan will be of no use. Good luck!
@veganfoodiecooks72823 ай бұрын
@@NashwaukSteve thanks a lot!
@tinacoladasiv6 ай бұрын
you dont need to make a exhaust hole to the exterior of the house ?
@NashwaukSteve6 ай бұрын
Hi @tinasiv2993 - no, you can recirculate into the same room. If you want the ability to exhaust outside, then you’d have to make a hole. Recirculating into the same room is okay. The only downside is if you’re using the fan to suck up smoke or smell, it doesn’t get rid of that air. It just gets a little filtering. That’s all.
@matthewanacleto7885Ай бұрын
Where is the hose that vents? Where does the exhaust go?
@daveforgot127Ай бұрын
Self vented. That is tje default setting.
@matthewanacleto7885Ай бұрын
@@daveforgot127, what does that mean? self vented?
@NashwaukSteveАй бұрын
It sucks air up through the filters on the bottom and blows it out right above the door. That’s the default arrangement, but you can send the exhaust outside if you install some additional parts that come with it. I hope that helps
@matthewanacleto7885Ай бұрын
@@NashwaukSteve That it does! That clears up a lot. I have the hood and the accordion hose. I just have to figure out how to attach the hood.
@andrewburke581515 күн бұрын
not helpful if youre skipping the exhaust vent portion.
@NashwaukSteve15 күн бұрын
I installed mine in default recirculating mode. You’ll need to find a different video of you are venting externally.
@pammcdougald535 ай бұрын
When shutting the door it is so loud, very annoying
@NashwaukSteve4 ай бұрын
Agreed! So loud and annoying!!
@pammcdougald535 ай бұрын
When shutting the door it is so loud, very annoying