[How To] Install Aftermarket Rearsets

No video

[How To] Install Aftermarket Rearsets

Рет қаралды 65,089

Күн бұрын

A quick guide to installing aftermarket rearsets.
Skip between 5:22 and 10:15 if you're not adding the rear brake light sensor.
Bike featured: 2011 Triumph Daytona 675R
AP website: www.attackperf...
Woodcraft spring link: bit.ly/2ow76xE
Pressure banjo bolt is M10 x 1.25 pitch thread
Intro music credited to: www.bensound.com and Instrumental produced by Chuki: / chukimusic
--------------------------------------------------------------------------
Your simple guide to DIY repairs on motorcycles
/ howtomoto
/ howtomoto

Пікірлер: 54

@munghini 3 жыл бұрын

Your video is more descriptive and detailed than even the STG, JP cycles, etc how-to vids. Thanks alot!

@salvaldes3229 2 жыл бұрын

The most impressive part of this video was not losing that circlet clip in the grass at 12:39

@zoltancsiger2898 3 ай бұрын

Very neat and highly informative video! 👍🏻 Thank you! 🤙🏻

@Rycerz49 Жыл бұрын

I just bought a beautiful 2013 gexr600 and I want to change the stock rearsets on it. I’m not mechanical minded at all but these vids are so helpful. They make me want to try at least. Good job. 👍

@nomuscleasianman 6 жыл бұрын

Thank you for this video; it was a good reference when I installed my own rearsets.

@howtomoto 6 жыл бұрын

Glad to help, Thanks for the feedback!

@LowImpedance1 5 жыл бұрын

Yep while you lubricate the ball joint with the chain lube, maybe let couple drops fall on that chain :)

@howtomoto 5 жыл бұрын

Chain has been replaced with a nice new shiny gold one. (but the old chain actually had plenty of lube on the inner races)

@tylerschock9026 3 жыл бұрын

Really needed this, thank you!

@Human_From_Earth88 4 жыл бұрын

Fking hell thanks m8 I bought aftermarket stands for my cbr1000rr 2005 and it came with that kind of stop signal switch and didn't know where or how to attach it 😄👍

@howtomoto 4 жыл бұрын

Glad to be able to help! :)

@vanixlloydpanelo4475 3 жыл бұрын

Sir, whats the use of the spring? Recently replaced my rearset & just got tired of thinkin' whats it for. Please help, tnx

@paulopinto7054 7 жыл бұрын

Thank u! I liked the video, it helped a little. I have an ABS cbr600rr 2011 and I find no video for my bike.

@howtomoto 7 жыл бұрын

You're welcome, Thanks for the support

@cesararranaga8274 3 жыл бұрын

Very informative video! 👍🏼

@zellcrs 7 жыл бұрын

the brake side was really helpful, the clutch side, yup, different animal to my bike haha, oh well at least it's the brake side I came for

@howtomoto 7 жыл бұрын

Thanks, I try :)

@natmartin3614 4 жыл бұрын

I like the music, who is it by? This video was really helpful. Thanks

@howtomoto 4 жыл бұрын

The music is from a youtuber named Chuki Beats kzfaq.info

@nikobd9984 6 жыл бұрын

Did you have a quickshifter installed? Couldn't really see. Great vid btw 👍

@howtomoto 6 жыл бұрын

Yes, my bike came standard with a quick shifter (the 675R model), Thanks!

@nikobd9984 6 жыл бұрын

Alright, so it's a 2016 model? I got a 2012. Thanks for your reply 😎

@antonybooth3293 6 жыл бұрын

If you can't tell by watching the video, never get one.

@nikobd9984 6 жыл бұрын

💝

@julitocas85 2 жыл бұрын

Hey mate thanks for the video! Helped me a ton installing them to a cbr1000rr 2007, but I am having issues the brake light will only come on once or twice and then stops working, I decided to bleed them again and the same happend, any suggestions?

@chrisssergio 4 жыл бұрын

So what is that thing called on 10:31, I’ve been trying to find one for my bike and that specific part, the carbon fiber shield thing

@jtking4842 4 жыл бұрын

I believe they’re called heel guards or plates. On eBay you can search just “carbon fiber rearsets” and you should find some.

@chrisssergio 4 жыл бұрын

JT King thank you!

@flesicia93 3 жыл бұрын

I'm trying to find a replacement peg for my set like this why is it impossible? Then I find your video and bam found it

@ShadowChemos 6 жыл бұрын

Did the carbon fiber heel guards get scratched up from your shoes in the few days you were riding?

@howtomoto 6 жыл бұрын

+ShadowChemos yes, i was wearing steel capped boots, not the best idea. My riding boots and normal shoes didn't scratch them.

@civic2 2 жыл бұрын

Where did u get the pressure sensitive banjo bolt and spring from

@chazhorn8899 2 жыл бұрын

I have a question. I laid my 2016 ninja 650abs down last night and my only issue is the left side rear-set is bent in causing my shifting lever to be obstructed. How can i get another piece (just that one rear set plate) by itself

@howtomoto 2 жыл бұрын

You have 3 options: Find a used one at a wrecker Buy that part from the dealer Buy a full aftermarket set Unfortunately, I don't think many people would be willing to sell the sets individually

@haroldpeagler1430 6 жыл бұрын

What site did you get that banjo bolt from

@howtomoto 6 жыл бұрын

I just went on ebay and typed "Pressure banjo bolt M10 x 1.25 pitch thread" but if you have a different bike, make sure you know what size and pitch to buy.

@haroldpeagler1430 6 жыл бұрын

And you dont remember on ebay for the particular one u have didnt want to do any splicing

@howtomoto 6 жыл бұрын

If you're asking for a link, here is the one I used. But remember I don't know if it fits your bike. bit.ly/2KNFpu2

@alexgrable5985 7 жыл бұрын

Where did you get that banjo bolt at?

@howtomoto 7 жыл бұрын

I just typed in "pressure banjo bolt" into ebay. Make sure you're aware of what size and thread pitch fits your bike, mine was M10 x 1.25 pitch thread

@Steven-bk3ye 4 жыл бұрын

Jesus! That chain 🤦‍♂️🤦‍♂️🤦‍♂️

@howtomoto 4 жыл бұрын

It's all gold now and new now

@lm8098 3 жыл бұрын

what's the point of fitting a $500 accessories if the basics/fundamentals of the bike are trashed??? ? (chain)

@haroldpeagler1430 6 жыл бұрын

Ok i got a 2001 gsxr 1000

@96StLouis 7 жыл бұрын

what was the torque specs for the four bolts at 12:00?

@howtomoto 7 жыл бұрын

The rearset to the frame was 27 N.m, and the heel guard/brake master bolts were 18 N.m. This was for a 2011 Triumph Daytona 675, be sure to double check for your model of bike.