I did this on my zastava m70 but now watching again for my zastava m90. Thanks again.

My mom said it's called a hammer and trigger pin retainer plate :) Nice instructional video!

I’ve installed more than my share of AK triggers but if I didn’t know how, I’d say this is likely the best video to learn.

Just completed this install on my new M70 thanks to you. Good looking out man this video was simple and easy to follow and I only got bitten by the hammer spring once.

“If my terminology is wrong, call your mom and ask her” instant sub 🔥🔥

Didn't have a dremel but thankfully had an old leatherman with a file for the safety roll pin. I got it! Thanks homie! The trigger is a night and day difference. There's an actual 'wall' to break. Good, clear, easy to understand video.

Just changed mine out. Man everything you said was 100% true! Good shit man!

Thanks a million brother. Just finished mine. Easy peasy.

Thanks for this video, just installed my ALG trigger on my M70. The hammer spring was terrifying, I ziptied mine haha

Nice video! I’m going to try this myself as soon as I get that trigger!

Great trigger best bang for your buck I put it on all my AKs 🤙🏽

This was really helpful, thank man.

Just finished installing it. Thanks!

Great video my guy. Going to add it to the zpap85 in the future

Excellent. Thanks. I’m thinking of getting one for my ZPAP. 👍🏻👍🏻👍🏻

Great video. I might buy one

Very well done..... the concise direction I needed Thanks!

Nice work bro 👍🤔 I might have to slap one in my N-pap M70 💯

Great video.

great video man

Great vid..glad dat sheet didnt get dat finger bro...ordered a new trigger for the missus's sheet today. Thanks yo!

Very informative

Great video thank you

My M70 has an ALG in it. My gunsmith was talking about the bolt catching every now and then on it and having to run it through a belt sander. The gun had 2 catches on the first 2 mags but been fine the past 10. I chalk it up to being cleaned. Never had an AK act right until it gets some dirt in it lol. I'm buying a WASR10 to be my more tactical set up since it has polymer furniture. Thinking I should do the ALG in it too so I'm not thinking I'm pulling a glock trigger lol

You weren't joking about "wrapping the wires around" 😵‍💫😵‍💫😵‍💫. Thanks for tutorial and comedies. Idk how you got the detent in.

I installed the ultimate and with the extra coating on the outside of it when I put the trigger housing in it was hanging up on the receiver I just simply sanding down the side of the trigger block then it freed up

now this is how you shoot a video, you can see every little bit of what he's talking about. so many times people will be talking about something and you can't see anything becuase it looks ok to them looking at it but on video it doesn't show up. i go this TCG and also got the new heavy hammer spring plus put in the small spring he shows at the last and with those to springs didn't feel like it was any lighter pull, i don't have a trigger pull grange so don't have numbers. but, for sure trigger pull was lots smoother. thought my SA93 was going to be one that didn't need the roll pin on the trigger for the safety, not so had to put it in and file it down so safety would work right. so i'm going to pull everything out go back to hammer spring from Bulgarian that was in it nd leave out the small spring on the hammer that goes in last when putting the pin in place, some call that a trigger return spring but it does add wt. to the trigger pull also like he said here. glad i found your vid and it's the best so far and i looked a lot of them, thanks for the help. UPDATE: after pulling everything again got the roll pin in and filed down. put OG Bulgarian hammer spring back in and removed the small spring on the right side of trigger. so if your wanting heavy hammer spring in they sale and the small trigger spring that comes with set. now it's really smooth and light trigger. still have to remove some rivet head or some disconnecter. don't know which I want to yet. great video

You’d make a great channel if you did all these types of videos with your humor 😂

2 years later...how did that hold up?

Great video really informative. Question is, I don't have a dremel. Can I file that part down and how much of it would I have to take off?

Bruh thank you!

this guy is so fuckin funny, and the tutorial slaps. 10/10

Will zastava still honor warranty if trigger changed?

Thank you

For those who change it, is it worth ? Percentage wise 10, 50, 90% better ?

Will it fit the Franklin or the BFS 3 triggers?

Top notch as always! Question, I just threw in a ALG and everything went pretty smoothly however after I pull the trigger it feels sticky on the reset. It was originally not resetting at all and getting completely stuck after a few function tests it resets fine now but it still feels like it gets stuck for a couple milliseconds and the reset isnt super quick. Any idea what might cause that?

Where does the longer spring go?

That's the shit awsome 👌

Sucks we can’t have these in Florida

Can you use a file to get that detent to fit?

Any wear on BCG on the m70 from the new trigger?

Hey bro is this the same set up as an zpap92?? Thanks..

The ALG hammer can peen the tail of the bolt carrier quickly as it’s hardened.

What kind of grease was that you installed the spring with?

Not sure if it's just Zastavas or if there's that big of a difference between the older ALG triggers and the "new" EL but the other videos I've seen of ALG trigger installs on AKs they have absolutely zero creep and no wall, just break. Kinda disappointing, mine has a huge uptake/creep before the wall and break.

I just installed that trigger in my zpap, its a little better than the stock trigger but still has a lot of creep, just a better break. Do you know of an AK trigger that has no creep? I had a geissele ssa trigger in my AR that was creepless.

I see ppl doing this install while the gun is in a vise & secure...can I do it without one?

The ultimate is lighter pull to the defender...also pricing is very different

Kns piston install tutorial ?👀

How much was this trigger ?

really sucks that this voids the warranty

It’s only trash cause u got a new one 😂

Just shot my zpap with alg-aktel trigger installed, tail of disconnector hits trigger guard rivet. Rivet is dented from being struck by disconnector after only 28 rounds. CHECK YOUR RIVETS ON ALL SIMILAR RIFLES PEOPLE. Evidently theres a big stink about this very issue. Even says on the instructions if your trigger guard rivet is higher than 0.062 inches ,( like i can measure 1/20th of an inch ), you will either have to file down the rivet or shave the tail of the disconnector to prevent them from hitting each other. People are experiencing broken disconnectors by not adressing the issue. Disappointing. Bad design in my non-expert opinion.

Mouse trap ass trigger

ISTG my m70 doesn't fucking work just got this trigger and the safety doesn't work