I learned how to resurface AK hammer face 10 years ago from Jim Fuller when he owned Rifle Dynamics. If you’re Dremel dies or you don’t have one, use hand files. Knock off those edges/corners and then use fine grit sand paper. Don’t stay in one spot. You can also use a shotgun shell to slip over the hammer and spring to prevent the cobra bite. You should should also replace the Shepards hook with a pin retaining plate.
@DragunBreath10 ай бұрын
Didn't know that about the shotgun shell, pretty cool. You can also bend the legs around behind the hammer, crossed over each other, and a zip tie. Once installed, snip the zip, and let the legs fly.
@Or3guns9 ай бұрын
@@DragunBreathOh zip ties, I would of never figured that out. How do you install them??
@DragunBreath9 ай бұрын
@@Or3guns - just grab the spring legs with some needlenose, fold them back across the hammer face, crossing over each other to hold in place, the zip tie them. Easy peasy.
@andygold2 ай бұрын
I wonder if doing this on a spindle sander would be a better idea. You could use both hands to hold the hammer, and have more exacting control on pressure applied.
@okiewind84036 ай бұрын
I did this with my Norinco several years ago and was told not to because they are great already but I did anyways and it was just that much smoother and recently got another Norinco and needed a refresher thank you sir.
@chris8576a2 ай бұрын
Yup just did this to my mak 90. Always getting caught with the first knob with the bolt going backwards.
@joshuapiszczek19243 жыл бұрын
This is the video I didn't know I needed! Can't wait to do this to mine. Thank you very much man!
@TheGeekyNerd3 жыл бұрын
Your welcome, glad you liked it and could assist. :)
@mookynukeАй бұрын
I build my own AKs and I had this crazy idea for a build so I mirror polished the rails before spot welding them in for a smooth glide. Will be modifying and polishing the hammer to take it over the top, thanks for video! My favorite go to is 'The One' with the polished rails/feed ramp ... Damn, can't wait for my next day off to work on hammer.
@rachelreynolds25512 жыл бұрын
Thank you for the video. I used a standard fine grit sanding cylinder on my Dremel then followed up with high gloss polishing #6 with a buffer head. Worked perfect on a PSA GF3-E with ALG trigger. The action was rough and would stick out of the box and with 300rds down range. I am surprised that ALG doesn't already have this smoothed out but now it is butter!
@Or3guns9 ай бұрын
I don't think it's really as big of a deal as everyone makes it out to be. It's more of a cosmetic issue then function. I've never heard anyone say their bolt was sticking open when they were firing it. The only time it really sticks is when you ride the bolt carrier back or forwards. People just like to tinker with their guns. I know I do lol
@BarnDoor-won5ve16 күн бұрын
I just put an alg akt in mine and now the bolt sticks terribly as in hangs up and needs smacked to return home, even WITH the alg recol spring. I also suspect that those pronounced humps on the hammer are pushing up on the bolt because now the charging handle also makes contact with the dust cover and is scratching the hell out of it when racking. I think I've come to the conclusion that bill's intent was to give plenty of material for an individual to remove from the hammer to ensure a proper and smooth end result with the varying models of ak's. I can say the trigger and reset are light years better than stock. I'm pretty confident that after doing this to the hammer, it's going to be fantastic👍🏻
@GOLTURBO555Ай бұрын
AK trigger works on self polish... If you remove too much material, the trigger ll not reset, a face some problems with the firing pin, and maybe safety too.
@petedivine Жыл бұрын
Thanks Man !! I have a Tapco GL2 trigger and will give this a try.
@davidkay7389 Жыл бұрын
Appreciate the knowledge and technique transfer 👌
@j.p.45412 жыл бұрын
Thank you for posting, I’m thinking of doing the same to my ZPAP. Can you tell me what grit you were using on your Dremel bit?
@JoRocket772 жыл бұрын
Good stuff, man. Thank you. I'm going to try this on my ZpapM70
@TheGeekyNerd2 жыл бұрын
Good luck! Hope it smooths out. :)
@j.p.45412 жыл бұрын
My ZPAP came in and hand cycling it is rougher than my WASR 10
@chriscox55682 ай бұрын
Don't use a rubber band, slide a used 12 or 20 ga. hull over the hammer to hold the springs behind the hammer to remove or install it.
@DC4EVA3 ай бұрын
I use a file and a fine grit drum on my dremel and end with the rubber bits that jave grit in them, forget what they are called, leaves a mirror finish.
@claytondennis803411 ай бұрын
"You can't put material back on." Me: laughs in TIG
@DragunBreath10 ай бұрын
*reminds himself to learn how to weld*
@johndecker99839 ай бұрын
Added bayonet lugs with my welder. Little filing, and I now have a heavy pointy stick. You know, just in case 😂
@unleasheth10 ай бұрын
I just oil sanded and starting at around 200 grit and worked up to 3500 oiled and polished bolt and carrier, took a good while on the front facing of the carrier and the latch. But for trigger would highly recommend save yourself the time and work and get a 30 dollar alg trigger and a 8 dollar recoil buffer. Still...good content man, ya have to really be in a mood to fiddle with stuff to keep patience with it, I know that's how I feel
@andygold5 ай бұрын
Where can you get a $30 ALG trigger?
@unleasheth5 ай бұрын
@@andygold well, at the time they were 35ish, I got it from ar15discounts, but now they are 65 and out of stock anyhow
@BackPorchMods3 ай бұрын
Y'know I was thinking the lock up was happening in the bolt itself but it never came to me that it was the angles of the hammer I did it but with a diamond bit and hand sanding and I did some trigger lightening too but instead of grinding from the hammer I ground the hook that releases the hammer. Edit: I thank you for your project giving me inspiration for mine
@canyou_heminow2 жыл бұрын
What kind of dust cover is that? I need a rail just like that!!
@sanjayjha9255 Жыл бұрын
Very Nicely Done!
@ExtremelyAverageMan2 ай бұрын
Great video, thank you. The trigger on my Zpap is gritty, and it's hard to find "the wall" sometimes I'll creep to the wall of the trigger, hold, and take my shot normally. Other times, I'll creep the trigger to find no wall and the shot will go off unintentionally early. Do I just need to polish the "trigger areas" as you've pointed out around 13:12 in your video? Just want to get my trigger to the point where I can 100% anticipate each shot and get it smooth. I'm trying to avoid spending $120 an an ALG if I can just file my stock trigger a bit.
@ViperFox_Ай бұрын
Just got an Arsenal and installed an ALG trigger and it’s doing this and this video popped up and literally showed me how to solve the problem I was worrying about lmfao. Thanks man!!
@jakeh6980Ай бұрын
Tapco triggers, ALG triggers etc, are not worth it and really unnecessary. I’ve been into AKs for about 14 years now and have a decent ak collection, and the stock triggers just have never bothered me: at least to the point where I absolutely felt I “had”to change it out unless it actually has to be replaced due to issues. I find a lot of people on the internet feel and sound like changing out their stock trigger is a “must” upgrade. Almost to the point where if they don’t change out the trigger asap, their world is going to end. On top of that, tapco and alg triggers have always tended to have bad effects on the bolt carrier. Which is why you end up having to do all this unnecessary modifying to prevent damage and unnecessary wear. Idk, I just never could see the whole obsession with changing out the stock triggers, only that people just want to shoot faster
@R.Tafolla Жыл бұрын
Be careful if you do this not to remove too much from the hammer. It won’t catch the disconnector and won’t reset.
@okiewind84036 ай бұрын
That’s one way to get a full auto 😂
@R.Tafolla6 ай бұрын
@@okiewind8403 nah youll get a hammer follow and a dead trigger.
@okiewind84036 ай бұрын
@@R.Tafolla oh ok. I assumed it just wouldn’t catch and keep firing.
@GOLTURBO555Ай бұрын
@@okiewind8403 u ll not listen the reset... Dead
@greatvaluewalmartАй бұрын
Literally a metal working infant, an ak alien. The last person I would seek guidance from.
@1badombre826 ай бұрын
You sure your not an AR guy lol? That is the cleanest gas piston I've ever seen. Thanks for the video . I did this year's ago to my m92 but I wanted to see if you did anything different.
@Or3guns9 ай бұрын
Why is that Fab defense dust cover so expensive? The ones that flip up are way better and almost half the price
@clayramsey0193 жыл бұрын
My bolt carrier has a lil gap what southern the fix for that? What would cause that and is it a shooting issue waiting to happen?
@TheGeekyNerd3 жыл бұрын
The bolt carrier naturally has a natural gap/give to it prior to engaging and is no worry.
@danmiller25235 ай бұрын
Who makes the top cover with the pica tinny rail
@LosDoyerss5 ай бұрын
An ALG spring and trigger with a KNS piston is the way to go.
@shaunwillis6207 Жыл бұрын
Great video
@user-by3jc1uo7u8 күн бұрын
Doesn't this "hang up" get better over time so why dremel any thing?
@andrewoxner2941 Жыл бұрын
Kids, avoid emergency room visit by doing this in a vice.
@M81_WOODLAND3 ай бұрын
I cringe when people use grinding or cutting tools on material that isn't secured in a vise.
@dougshelton69 Жыл бұрын
A spent 12 gauge shell works AWSOME for anti snake bite.
@bruceinoz80029 ай бұрын
See also' Bag-ties or fluffy pink pipe cleaners.
@okiewind84036 ай бұрын
What am I missing? What do you mean by snake bite?
@dougshelton696 ай бұрын
@@okiewind8403 when you get bit by the hammer springs snapping on your hand,you will have 2 little bloody holes that look just like snake 🐍 bites😛
@okiewind84036 ай бұрын
@@dougshelton69 😂 oh ok. I’ve avoided that so far lol
@dougshelton696 ай бұрын
@@okiewind8403 your Mr lucky....changed triggers alot and it still can happen...
@danareesullivan31269 ай бұрын
Yo I’m from Massachusetts, I really can’t be sad for dude because dude gets nice aks and I get only prebans$3000000 but I will never give mine up no matter how much it ducks
@DepakoteMeister4 ай бұрын
Might it have been wise to have checked the surface hardness of anything modfied before and after, just to check if you've removed any surface hardening?
@Secondrunnerup6137 ай бұрын
The BEST best of both worlds is the Galil in 5.56.
@jakeh6980Ай бұрын
Nothing in 5.56 is the best of anything; especially AKs in 5.56. 5.56 AKs, ak variants etc, is just an abomination
@Secondrunnerup613Ай бұрын
@jakeh6980 well based off your stupid remark then nothing is good for anything. 5.56 is a great defense round. Light weight, high powered and comes in plenty of options.
@Tadjuel11-113 ай бұрын
Using a zip tie is much easier then a rubber band in the trigger spring.
@tedr.richardson46559 ай бұрын
Keep all your Mags loaded, Empty Mags are like Dead Power Tool Batteries, Useless when you need them. Semper Fidelis
@AttemptMade Жыл бұрын
Be careful with this sort of thing, a lot of com blok ak parts don’t use fancy steels like American ones, a lot of them are very soft steels with case hardening and if you hit the wrong spot with the dremel it could end up peening and then jamming.
@aaronsandoval5392 Жыл бұрын
Thank u
@norrisdustlessblasting45074 ай бұрын
Definitely a Ar guy
@emilmihaidragomir8329 Жыл бұрын
Brandon Herrera approves this!!😆😆😆 Great job!👍👍
@whereisthebalance573210 ай бұрын
brandon doesnt know how to work on AKs
@chrisvaughan24627 ай бұрын
I’ve got AK 103 (Russian made, not some zastava crap) with under barrel handguard rails on the side and bottom and that’s it. anyone can get that handguard, gun will maintain the AK looks and you’ll be able to mount the grip and a flashlight on it… why would you go extra Transformers on it?
@orpheusepiphanes27973 ай бұрын
noone cares
@TylerHaskiell-fs3mxАй бұрын
Someone sounds salty they paid more for ( Russian ) probably came with canted sights and fucked up rivets 😂
@orpheusepiphanes2797Ай бұрын
@@TylerHaskiell-fs3mx Noone cares about some windbags definition of "ak looks"
@whiteru55ian33 Жыл бұрын
I’m going to treat my Romi SAR-1 she deserves to be spoiled a bit.
@DIYStangsandFreedom2 жыл бұрын
Goonsmithin'
@StrelokTheStalker2 жыл бұрын
Man.. lol
@TheGeekyNerd2 жыл бұрын
Kitchen counter required lol!
@DIYStangsandFreedom2 жыл бұрын
@@TheGeekyNerd and a Dremel :) , by me using a Dremel. It automatically makes me a g00nSmith!
@danareesullivan31269 ай бұрын
Milwaukee , I 👍
@mattburns5452 жыл бұрын
*Shepherds hook
@BUTLER308 Жыл бұрын
This is nicce thank you
@richardturk71625 ай бұрын
People that say Yadda yadda yadda are really annoying. please try to stop saying things like that. Too many "forum" comments and fluff that really doesn't have anything to do with making an AK smoother. Basically just get to the point of the video.
@tizben3 жыл бұрын
Why am I here, I don't have an ak 😂
@TheGeekyNerd3 жыл бұрын
Not yet at least lol
@mrguiltyfool3 жыл бұрын
Ak is banned in my place Canada and i still watch ak vids
@tizben3 жыл бұрын
@@mrguiltyfool that makes me sad
@mrguiltyfool3 жыл бұрын
@@tizben and they are planning on implementing aus style of gun ban in Canada
@tizben3 жыл бұрын
@@mrguiltyfool oh my god 🙏
@XPEHb2 ай бұрын
Чел, просто настреляй пару тысяч пулек. И всё само собой притрется.
@tactical-bucket8 ай бұрын
Spent 12 gauge shotgun shell works way better than a rubber band. Also, vise these trigger components up and DO NOT grind your bearing surface away from being flat to the carrier. You were coming at that hammer from all sorts of angles. Terrible work there. Keep your rotary tool completely flat to the bearing surface so you arent rounding off your edges. FFS
@racecarjones46654 ай бұрын
why tho
@mrguiltyfool3 жыл бұрын
First comment again
@TheGeekyNerd3 жыл бұрын
Off to the races I see lol
@hindsight2022 Жыл бұрын
Bubba af
@user-ge8sr6lp3r9 ай бұрын
Can’t you stop talking and go right to the point
@jayward75364 ай бұрын
gonna domy arsenal this week for sure
@markmitchezee27285 ай бұрын
"FLITZ" Metal Polish ! --> THE BEST ! - BE PREPARED - Many of you may require the Services of a local & preferably "Peaceful" Democrat in order to confirm as to whether your polishing has indeed reached the smoothness level of a "Baby's Bottom". The skill required in determining the smoothness of small children's bottoms are something that Democrats diligently focus on & in-turn are very very good at. Hey ... just try'in to Help !