I had to write this. I've been working on this system for a week on and off and was about to give up. I watched countless other videos but none really broke it down and explained each wire function and name. How you don't have a million+ views on this is beyond me. I feel like I can give it another try thanks to you. I believe my 03 ram 1500 has different color wires than listed on websites. Closest I came was a engine crank for 1 second. Another time I was able to start it but every warning light came on dash and no air conditioner compressor not activating. Time to get back to work. Much appreciated sir.

Successful install thanks to this video. Still can't believe I pulled it off but your video really helped me prepare well for the process.

You the man Ed keep up the great knowledge and products.

love how much work you put into editing and graphics thank you gor the video

Great video Ed! Thank you for the quality information!

This video looks very good. I bought a Viper system (I'm mechanic) and I want to install it. I think your videos will help my to do this, thanks.

To make sure nothing bumps into it. Throws bottle at car. Hahaha love this.

This is freaking awesome, if I ever decide to replace mine in my xb, you da man!!!!!

The best video! Thank you!

VERY NICE INFO BRO!!!👍👍

you got skills, man! great work.

Great video! Thank you.

Hell of a video. Had me laughing, and leanring.

As an Ex-professional turned arm chair installer lol, you should have threaded the needle and soldered sheesh you newbies. 🤣🤣 Another great video. Loved the production and editing. 👍 👍

Great job bro

I NEED TO DO THIS!!!

thank you you are the man always with great knowledge. Come on people gives a thumbs-up👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

Great video!!

Haha!! Great video!! Informative and entertaining

Watched the first few seconds and already subbed

nice video man

Good vid 👍

I love that you show the MECP book but that version is from the 90s. They have updated it one or two times since then with Basic, Advanced and the Master guide.

Awesome Ed!! ;)

I for one solder all my connections with pure silver to NASA standards... 🤓🤓 great video man! It won’t get the love it deserves because I can only imagine the amount of time it took just to capture the b roll...

This is an amazing video dude . You you think about doing a video of what happens in your car from alternator to the batteries to the amp and signal from front to back almost like an a&p of a car electrical system

Great video. The tech notes come with the alarm kit or do I need to find them on line ? I have a Dodge ram 2022 pro master city . I have the 3051 viper alarm no keyless start it’s also has pager built into key fob

Thank U for the video, I installed a remote start but I can get the car to start... I also have 2006 Scion xB don’t know where to hook up the White and blue wire . Need help

I have the exact same vehicle and I’m trying to install the same alarm. Do you have a list or diagram of where all the wires go to. I see you’ve marked the wires needed to test and the wires to connect but you didn’t go into great detail about which wire goes where. The way they label them in the instructions are…odd lol. Do some get connected to the same wire, where does the parking brake wire go, etc. Any help with that would be great! Thanks, awesome video too!

How did you wire for the double pulse? You showed how to test, but how did you wire to alarm?

Hey I’m trying to get the remote start going on v6 tundra any advice I don’t get what the alarm means by inputs and outputs

Thanks

Shout out to mobile dynamics. I also graduated from there. I went on to install remote starters and accessories for a group of dealership for 10+ years. Some of this stuff makes me cringe.... but all in all I understand you dont do this everyday like I do. De-pin your extra wires. Dont cut them and leave them on. Remote starters are not meant to be taken out and put into other vehicles. Shrink wrap is not practical but I do solder all my connections.I dont understand your threaded needle technique, Ive seen it done and I find it much more bulky and annoying to deal with. If you wrap your wires tight and solder clean its not that bad...especially if you dont ziptie all your tape points which is overkill and probably wouldnt even be possible in lots of vehicles due to very little room. Also you ALWAYS need a tach. In the winter your voltage sense will not work at all and essentiall render your remote starter useless for the purpose it most likely was installed for. I guess unless you live in a hot climate and start your car for ac and not heat. Fun video though. I liked it

Would there be a reason why the parking lights wont work on arm disarm or panic?I have a viper 7506v. Any info is appreciated 04 toyota

I have the same car and setup but when I remote start the car runs and shuts off 3 times . Would you know what is causing this? Tachometer? Or the settings? It also cranks for at least 5 seconds before starting but I can start my car easily with the key. Would you happen to have any closer pictures of what wires are where? Everything else works! Thank you!

Could you tell me how to get the parking lights to work. I wired the white with amp from the RS to the green under the steering wheel and its not working. I have the same car and year.

Hold up. DIY dude here. Thought I was sure about what cables were what but a section of your video confused me. At the beginning you stated an accessory was already hooked up, but when you went to test the accessory, you proved a different wire. Also, on the spec sheet the ignition and second ignition are reversed compared to your edit in that same spot. I’m working on a 05 xB, practically the same. Downloaded the spec sheet from the same source. Is the blue/cable not accessory? And the black vs black/yellow cable, those are not ignition/ignition 2?

Awesome video very helpful thank you

It looks like you had two ground wires you installed? I only see one on the brain. What’s the other ground wire?? Thanks 😊

What is the name of that book that wiring instructions for the car

I have a 2002 vw Passat that a a viper remote start and it’s throwing my car in how was activated. When I mess with the wire it will start just fine. I can’t find any videos on how to un-install the remote start

my siren stop working but remote start and lock and unlock work, any help??

What are the exact connections for this car help!

how to program program the horn only comes on when the alarm sounds, and not when the vehicle is opened and closed?

Where does the tach wire connect? I have the exact car

oh mate i wish u were close to my country i need help about aftermarket italian alarm called cobra gt...im trying to remove the dam thing as it died and cause too much troubles to me...called electrician who only said will cut the fuel pump restriction and ill be good to go ...but since then i lost my central locking and still noone wants it to remove the freaking thing out of my car so i can install only central module....

I install the alarm but it would not lock or unlock the door. Can you help please?

Hey great video thanks very clear and easy to understand! I need some help though, I'm trying to install a remote starter in my 2016 ram 1500. Read through wikihow and figured it's within my capabilities. The ignition switch only has 4 wires coming out of it, one constant 12V, one ground, and the other two change between 0V, 6V, 9V, and 12V as I cycle through the key positions. The wires are quite thin so I don't think I should tie into them. They must be going to some kind of control module which is where I'll have to tie into, but I'm not sure where to find this. The wires go up and group into a larger bundle which is where I get lost. Plus everything is wrapped in some kind of fabric tape really difficult to remove/cut through. Has anyone experienced this before can give me suggestions?

Not gonna lie, It kinda hurts watching you abuse the poor toaster... Amazing job on the install!! I am contemplating doing this to my XB for warming up in the winter time. Have you had any problems with this remote start kit?

Hey SparkedEd I installed it all based off your video and it worked good up until recently the batteries on my diesel died while I was out of state and I opened the door using the key and when I installed my new batteries the alarm started going off and it does not stop until after 3 cycles I tried resetting it but nothing seems to work can you help me out !

Excuse me if I'm wrong, but shouldn't Ignition 2 drop with crank like Accessory?

I just got the 1000$ Compustar T12 Alarm/Remote start and the system has NO door triggers...any ideas why that is??

I just drive a stick shift, literally can leave it running and I've seen ppl scout it out see the stick and walk away. To funny. Plus my car is literally my old beater. A 2005 chevy cavalier, ain't noone trying to steal that.

Where does the blue a nd white wire to activate the alarm

This is a great presentation. I will like to have your contact. Best of every.

Can this be done to a manual Scion xB?

Did he use a bypass module for the remote starter?

Hey man I would like some help

Next, How to replace door solenoids

If someone can help me please, I have bought a car that has this alarm system on it and it's going off. Nothing I do is stopping it. I managed to find the brain of it on the dashboard. What's the best way to disable it? Just pull out all the wires in the brain?

How come you were able to install that remote starter without a bypass module? That’s pretty weird

We all need to do this if it doesn’t come stock on your car, but people will end up not being able to start their car, lock their doors, turn their lights on 😂 some mf’s will just hit that yellow wire for the airbags... I mean some ppl just can’t work on cars 😂

Lol...nice sound effects touching the handle of the car

i have had a remote start on my shelf in my basement since last summer got it for 20 bucks from my stereo shop buddy... Reason I did not INSTALL cause my car is 6spd MANUAL 2010 AUDI S4... What extra steps or how do I install REMOTE START for MANUAL OR STICK SHIFT, CLUTCH VEHICLE... Also my AUDI has Factory Alarm does this affect this?? Ty in Advance ANYONE

Step 1: commercial

I lost my booklet I know that i need to have door open and key on /off then press and hold transmitter button down number of chirps indicate number of times I'm to press and hold arm button down till the alarm turns on then turn key on to look in program on new remote ? Please help

Car is smashed in rear light.. i would fix that first

Damn it’s not subtitled,

You can do all that work or buy a stick shift and keyless entry liked how it wasnt just a bland install video

You never showed how you did your starter kill connection. Definitely should have soldered that one. Anything you cut, anything mux, anything underhood or in door, anything data should be soldered. Also, hide your siren, way too easy to cut right there.