How to INSTALL AN F30 / F32 FRONT STRUT BRACE! (Easy F3x DIY!)

Рет қаралды 59,686

4 жыл бұрын

Get yours here: www.kiesmotorsports.com/searc...
Hey Everyone,
In today's video, we're going to show you how to do a SUPER EASY mod to your F30/F32... the Strut Brace! As you'll see, this mod is extremely easy to do and only takes a few minutes to install. Not only will it add a little bling under the hood, but it will help to tighten up the front end of your car, resulting in a minor improvement in steering and handling!
If you're interested in better steering input and handling, here's a link to the strut braces we have available:
www.kiesmotorsports.com/searc...
Here's a few helpful tools:
www.amazon.com/shop/kiesmotor...
Thanks for watching and please try everything at your own risk. If you’re interested in professional installation by Kies Motorsports, please click here: www.kiesmotorsports.com/pages...
ALSO, Scroll Down ⬇️ for:
🏎 BRYAN’s BUILD
📬 Kies Contact Info
📽 Kies Motorsports Video Playlists
🛠 Recommended Tools, Gear, and EXCLUSIVE Kies Partner Deals!
🌎 And More!
Bryan
Bryan Kiefer
President
Kies Motorsports, LLC
Hammonton, NJ
Info@kiesmotorsports.com
www.KiesMotorsports.com
Authorized Dealers and Installers of: ProTuningFreaks BootMod3, BimmerTech, AWE Tuning, Evolution Racewerks, CSF, Pure Turbos, Fuel-it, Studio RSR Roll Cages, MST Performance, Burger Motorsports, VRSF, Bilstein, H&R, Injen, Borla, Dinan, GoFastBits, Depo, VMR Wheels, BBS, Sparco, Snow Performance, Nitrous Express, AFE, Akrapovic, Eibach, Hawk, Fifteen52, Koni, KW, Seibon, Stop Tech, Vorsteiner, Wagner Tuning, Wilwood, and many more incredible brands!
🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎
BRYAN’s BUILD 👇🏼👇🏼
Click Here to see links to EVERY PART on Bryan’s Build! 👉🏼 www.kiesmotorsports.com/pages... 👈🏼
📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬
Contact:
Website: 🌎 www.kiesmotorsports.com 🌏
Contact: 📩 Info@kiesmotorsports.com 📩
Instagram: 📸 kiesmotorsp... 📸
Facebook: kiesmotorspo...
DRIVETRIBE: 🚔 drivetribe.com/t/SpEBj-8EQESm... 🚔
Twitter 🐦 KiesMotorsports?l... 🐦
📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽
Click below for Playlists of Kies Motorsports videos that will cover Performance, Aesthetics, Retrofits, and even Vlogs!
Click here for ALL of our Playlists!: 📽 bit.ly/KiesPlaylists 📽
🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠
Click here for Tools, Camera Gear, and Exclusive Partner Deals!
Tools, Camera Gear and More! www.amazon.com/shop/kiesmotor...
Exclusive Partner Deals: www.kiesmotorsports.com/pages...
🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰
Special announcement! ProAutoMotion is now a part of Kies Motorsports! Find all the ProAutoMotion products you love at www.kiesmotorsports.com

Пікірлер: 93

@fobrob49 4 жыл бұрын

I was just looking at these on your site the other night. Glad the video finally rolled out. Definitely purchasing once the weather improves and I have time to work on the car.

@johnungvarsky8875 4 жыл бұрын

Another excellent video, Bryan. Attempting to attach a photo of my strut brace in case anyone is wondering how it looks powder coated.

@brianfortenberry1012 Жыл бұрын

Going to be my next purchase. Thanks Brian for Putting out so much relevant helpful info

@OakInch 4 жыл бұрын

These braces help noticably with stiff coilovers. The brace spreads impacts between both front coilovers so you don't get jackhammered as hard when hitting a bump.

@carsinourdna9388 4 жыл бұрын

Congratulations for 100K Subscribers. keep it up brian👍🏼

@chefjefe68 4 жыл бұрын

I think I just found my next mod. Thanks, Brian.

@Specter_TF141 4 жыл бұрын

Been thinking of getting one thanks for these videos man 💪🏼

@DonOneDemarco 2 жыл бұрын

Great video I wanted to sort out the body roll ever since I got my f30

@HabibiOO7 4 жыл бұрын

Installed this on my F31 & wow! you definitely feel the difference, I would also suggest the Autoteknik lower reinforcement brace also!

@hishams89 4 жыл бұрын

Hello Osama, what does the lower brace exactly do? How can you describe the difference? Thanks

@noobracing321 4 жыл бұрын

Finally got around to installing this. This is definitely a necessity for an F30. Hopefully they do a the rear one video.

@guccipig2782 Жыл бұрын

What does it do ?

@wingedhussar5528 Жыл бұрын

The bolts are listed as single use by BMW. Although you can reuse them I would not torque past the 30nm. Only do the 90 degree turn if you are using new bolts.

@GracesChase 3 жыл бұрын

You are the DIY BMW guru 🏎

@Awackypenguin 4 жыл бұрын

I've done something similar in my F10. DO NOT OVER TORQUE IT. The strut tower threads strip pretty damn easily for some reason, and if you strip it you'll need to either drill and tap a size larger, or so a helicoil repair.

@CookiesUnleashed 3 жыл бұрын

is doing that extra 90 degrees over torquing it?

@boganthesue8058 Жыл бұрын

That’s what I did. Went for larger size

@boardelia 6 ай бұрын

How many nm would you concider ? Like 30 and avoid the 90d turn ?

@Kevin-gy1gx 4 жыл бұрын

thanks Brian，nice video. I just wondering if this strut brace can avoid the “battery box cover”? Because you know some F30 LCI they have a extra plastic cover behind the left shock tower .

@tuncyucel7896 4 жыл бұрын

It also works with F20 and F22s been there done that.

@IIlVipeRlII 4 жыл бұрын

Can you please do a tutorial on the f30 for the thermostat replacement

@noobracing321 4 жыл бұрын

About to jump on this but has anyone installed the rear? Just looking for a video or picture. Best F30 DIY channel on KZfaq.

@Saielb 4 жыл бұрын

Looks like this will be so much easier than sways, especially for the xi's.

@cossied01 2 жыл бұрын

I sourced 5mm longer bolts to allow for the thickness of the brace plate.

@TommyLGarage 4 жыл бұрын

I tried that with my neighbor....had to call an ambulance. Thanks a lot

@weekendcyclist7410 4 жыл бұрын

Hey Brian just out of curiosity what's the weight difference between steel and aluminum one ? And as always great video 🙂

@K03sport 2 жыл бұрын

I don't have a BMW, but well done...so, what difference did adding the cage in the back(seat) do to the car? That should have made a difference too, yes?

@FQ1998 3 жыл бұрын

Chris, should i replace my sway bar endlinks and bushings for better handling ? Have a 440i, also is it 28 mm or 32 mm on the website.?

@theazndudelivefree 4 жыл бұрын

Did you replace those nuts since they are angle torqued?

@twinb5840 4 жыл бұрын

I swear last week I was looking for one for my f30 but didn’t know witch one to get

@rangerover4197 Жыл бұрын

Do we have to change the bolt as well?

@InterdimensionalFraggers 4 жыл бұрын

I was thinking about getting one for my F30

@liamcusack5475 4 жыл бұрын

I have 3seres

@bentalbottalbot 4 жыл бұрын

Rick Sanchez really

@phulei 11 ай бұрын

So I have to take it out every time the engine cover needs to be removed? And do those bolts need to be replaced every time since they’re aluminium? Thank you

@nathanbutler2025 3 жыл бұрын

The strut tower bolts on my 2014 328i (RWD) are 16 mm not 13 mm. Does this change the torque specs?

@cal79 4 жыл бұрын

Will these fit my bmw 435d f33 2015

@moonx02 4 жыл бұрын

Would this fit a 2016 F34?

@iliamaliarchuk 4 жыл бұрын

Do a review for f30 vs f80

@Zombie_Noc 4 жыл бұрын

Bryan this front strut brace could work on a bmw f20?

@maskof 4 жыл бұрын

Once you've torqued the bolts to spec, why are you torquing an extra 90 degrees?

@fondoo 4 жыл бұрын

will it fit in a F36 and is the carbon version full carbon???

@noobracing321 3 жыл бұрын

I just installed it and does the strut bar cause an indentation on the hood liner?

@jh98516 3 жыл бұрын

Does it also work with 2015 428i F36 models?

@erdalcakmak87 3 жыл бұрын

Are there strut bars for the f32, I can't find them anywhere

@the_batmobile0.4 2 ай бұрын

Does this help with lame light floaty feelings that these 340i f30 has?

@hankzheng 4 жыл бұрын

Nice channel

@readmposter 4 жыл бұрын

Damn it Brian, now I have to drop $600 on that sweet carbon fiber one. Unless you wanna send me one... 🤣

@mihneafronie9390 3 жыл бұрын

Can i put one on a bmw f30 320d xdrive lci 2016 with a b47 engine ?

@DJRanoia 4 жыл бұрын

Oh no the poor engine cowl is stuck now. I'm glad there is an easy removal for that.

@kef103 2 жыл бұрын

Does this fit the 330e it is lci with the b48 engine

@tgardner88 3 жыл бұрын

I can attest that it makes a noticeable difference and that is with 17" wheels on my F30. I am having 18" M400 wheels installed and looking forward to how that feels. Has anyone other than Osama Bandi installed an Autotecknic lower reinforcement brace? Is this a DYI that a newb like me can do? Is it worth it? How about a video on that?

@frankmartinez4089 4 жыл бұрын

I wish you would do some G30 content

@skyedream160 4 жыл бұрын

Can you show us how to install the rear strut bar on f30 as well please?

@matthewwolak3284 3 жыл бұрын

@coopereldridge5014 3 жыл бұрын

@@matthewwolak3284 thanks

@bensmith715 4 жыл бұрын

Looking at ordering one but it seems BMW lists the strut tower bolts as single use since they stretch. Has anyone used the old bolts again?

@JayLafray 4 жыл бұрын

Ben Smith I just reused mine. Everything seems fine. No issues.

@romanianx 4 жыл бұрын

Been following you for a long time brother ! Y'all inspired me to do the mods on my 328d. Been thinking of doing a channel for the diesel part of the F30 ! Any advice or help would be immensely appreciated !! 💪🏻💪🏻 #F30inWashingtonState 😂

@ronabbott2053 2 жыл бұрын

any neg effect on ride?

@jackhere4594 2 жыл бұрын

u say it tightens it up. the electric power steering is already super tight or sensistive, too sensitive for my liking to be exact. ! if this tightens it up more, u can just blow on the steering wheel and ur in the other lane. so is that what u mean by tightens it up?

@omgbabe 3 жыл бұрын

Can I install this in F31?

@jacobculps7357 2 жыл бұрын

will this work on a f22?

@ChristianFantana 4 жыл бұрын

Chris's strut brace video brought me here.

@TheJraze18 4 жыл бұрын

Looks great and,does it also work for the f30 B58 ? thanks

@mexicangamer4 4 жыл бұрын

Yes

@zacharytennant 4 жыл бұрын

Jraze18 s1000rr/340i yes it does

@allenzelt4481 Жыл бұрын

So when trying to remove the bolts like at 2:34, I heard a pop and the top of the bolt sheared off, leaving the threaded portion in the socket. It was on the center of the three front-side bolts. What can I do to remove the remained of the bolt, and to make sure it doesn’t happen to any more of them? I very much want to install this!

@boardelia 6 ай бұрын

You can use make a hole on the bolt with an electric drill

@aj777mc8 3 жыл бұрын

does STRUT BRACE void your warranty?

@gen13pinoy 4 жыл бұрын

Bro .. how heavy are they?

@kef103 2 жыл бұрын

I have a 330e I would imagine the difference would be even more noticeable given the cars extra 500 lbs of battery

@AshrafAli-dk5su 4 жыл бұрын

I have a BMW 320i XDrive, how do i tell what engine i have? If its an N20 or not?

@fobrob49 3 жыл бұрын

Google a BMW VIN decoder & enter in your VIN. It should provide you with a breakdown of your car's specs/features (including engine).

@davidrubin2612 4 жыл бұрын

is there a cheaper on that exists i dont see why its so expensive :(

@mrlten2907 4 жыл бұрын

Aren't those strut tower bolts a bit too short because of the extra height of the base plate?

@johnungvarsky8875 4 жыл бұрын

Maarten Houtman The base plate isn’t that thick and the stock bolts are pretty long. No issues. I can measure both and post the measurements if someone is really interested.

@HabibiOO7 4 жыл бұрын

I removed the thick oem washers & put thinner ones, works fine.

@esitu5655 3 жыл бұрын

Lowes has some aluminum anodized washers, or stainless steel should be ok also. Maybe just put a thin film of anti-seize compound or silicone grease in between.

@042452 4 жыл бұрын

Sadly won’t work on a 328D

@turbo8954 4 жыл бұрын

What’s the difference between the aluminum and steel one?

@f32440i 2 жыл бұрын

😂 😂 😂

@boomslang4109 2 жыл бұрын

Weight

@razzy530 4 жыл бұрын

I doubt it

@andreiblk5894 4 жыл бұрын

Is it good for Xdrive?

@KrisSchumi 2 жыл бұрын

If this improves handling as claimed, why doesn’t BMW do this themselves instead of leaving it for after market?

@dmallz 2 жыл бұрын

BMW does, It's one of the many differences between f30 and f80. Not all base cars come with these kind of upgrades because these ad on's help when the vehicle is driven hard. An F30 will be fine and last long without them, but performance wise it's better to have them. Inexpensive upgrade, very worth it. Noticable difference.