HOW TO INSTALL AND REPLACE FRONT TURN SIGNALS HARLEY DAVIDSON FAT BOB 2022

Рет қаралды 37,524

2 жыл бұрын

please like this video :)
Facebook: / ghostlyrich
drag specialties turn signal light part number is
fortnine.ca/en/drag-specialti...
Hope this diy do it your self tutorial helps you change your old turn signals from your harley davidson fat bob and helps install your new one's.

Пікірлер: 43

@allysadeal9167 2 жыл бұрын

Thank You! i have been waiting for a how to on the LED lights for quite sometime! They look great!

@j3tztbassman123 Жыл бұрын

I bought those same lights for my Forty-eight, I might be able to install them myself. Thanks to you.

@richiew3184 6 ай бұрын

Thanks for creating this guide. Really helpful for me as I’m about to install on my bob.

@SonOfRich56 2 жыл бұрын

Hey Man, thank for this video and all others fat bob related. I have the same one as you. I’ve never had the confidence to do any work on my Jeep or motorcycle, but this video gave it to me. I put the new LEDs on my motorcycle yesterday and it wasn’t tough, felt great being able to work on my bike, strip wires, soldering wires and see the final product come out great. Excited to put my relocation license plate on tomorrow. Thanks again and keep up the good work!

@ghostlyrich 2 жыл бұрын

Keep at it champ! If you ever get frustrated take that extra moment to breath and let your mind reprocess the task your working on. Glad you got the job done and felt the enjoyment of accomplishing the task. Hopefully it helps give you a boost for other projects ahead. The jeep is another vehicle i love working on ( probably why i just hemi swapped one) keep at it!

@SonOfRich56 2 жыл бұрын

@@ghostlyrich thanks and will do.

@edhog Жыл бұрын

What’s the led for underside of the rear fender you used? Thanks for the video

@DTH8220 2 жыл бұрын

Thanks for the video - i Will do that on mine 👍💪

@ceskazbrojovka9001 5 ай бұрын

Well done, very clean looking. Wish they were legal in my state, here not DOT approved

@letiziapassanisi9967 Ай бұрын

Is this generally the same install process for a 2021 street club do you think?

@markrosen758 2 ай бұрын

I'm about to do a similar mod. I'd like to understand why you decided to feed the new wire through the bars and solder down near the connector instead of using the stock wires. I was thinking of pulling a couple inches of stock wires up, clipping and soldering at the turn signal end, then pulling the wire back into the bar for a clean install. Is there a reason why this would not work?

@vincentwebster8313 3 ай бұрын

I use masons string. Really strong and will not scratch any surface

@junc9094 Жыл бұрын

nice work, one question: does it throw a engine code/ warning because of the missing of running light ?

@ghostlyrich Жыл бұрын

Nope. Works perfect

@junc9094 Жыл бұрын

@@ghostlyrich thanks for the info

@TheSkyhighmusic Жыл бұрын

U still got your bullet lights? Lol I need one

@mattthompson3656 Жыл бұрын

Is the hay wire the same as baling wire (for hay bales)? Thanks!

@ghostlyrich Жыл бұрын

Yep :)

@pepezamudio6341 Жыл бұрын

Thanks, i thought that i had to take the tank away to connect the front turn signal, since the connectors from the back ones are under the seat

@ghostlyrich Жыл бұрын

Yea definitely took me a second as well

@derekt3439 2 жыл бұрын

did you need to add a load resister/stabilizer/equalizer for hyper flashing?

@ghostlyrich 2 жыл бұрын

No I did not experience any sort of hyper flash apparently the newer models don’t suffer from it. right from the service department at Harley

@derekt3439 2 жыл бұрын

Really eh, do you know if this is true for the new 48’s?

@ghostlyrich 2 жыл бұрын

@@derekt3439 I can’t see why it wouldn’t be

@derekt3439 2 жыл бұрын

Sweet, I’ll give it a try and see. Appreciate the video, I’ve been looking for one for forever 🙏🏼

@badbrewsy4937 10 ай бұрын

Did you get any hyper flash after the install?

@ghostlyrich 10 ай бұрын

No, I did not

@MrPAULONEAL Жыл бұрын

Instead of electrical tape you should use heat shrinks.

@leewalton2459 Жыл бұрын

You should always cover your tank w towel or rubber mat..your SIGNAL light hit ya tank 3 times chips???

@ghostlyrich Жыл бұрын

Nope, no chips

@ampegloud Жыл бұрын

Some people you can’t tell them anything they know it all you should cover your tank, then like being an idiot, right😂

@ghostlyrich Жыл бұрын

? You can cover the tank if your worried no one is fighting anyone on that point its a good step to take i answered back saying there wasn’t any chips. I have seen people cover there panels and work away thinking everything’s fine and still slip with a wrench or let the ratchet handle go and mess it up. Damned if you do or don’t

@kickerlike08 Жыл бұрын

Anyone know of these compact type lights that have also running white lights?

@ketobeast8489 Жыл бұрын

I saw an install on the channel called Nooowayyjose with white running lights

@jitin.mishra Жыл бұрын

DRAG SPECIALTIES 2040-2793 LED Handlebar Marker Lights

@andrewvickers4487 Жыл бұрын

If you don't mind a bit bigger and a lot pricier see Denali's T3 lights (no first hand experience), they claim super bright with DRL, lots of mounting options.

@heppcat77 Жыл бұрын

Eagle Lights has almost the same light with three wires.

@andrewvickers4487 Жыл бұрын

@@heppcat77 On first look you can use white or amber light but they don't work as running lights, only as turn signals.

@20MAC20 6 ай бұрын

SUCH A CUTE FACE.....

@manny1067 Жыл бұрын

Always disconnect the ground to the battery first before attempting anything electrical on a motorcycle… the battery can explode… most important thing!!!

@ghostlyrich Жыл бұрын

Never had that happen, for that to happen would need a prolonged short