How to Install Cabinet Door and Drawer Handles/Knobs/Pulls

Рет қаралды 93,072

Жыл бұрын

In this video I show you a few different ways to install cabinet door handles/knobs on doors and drawers.
Tools and Materials Used in video - (Affiliate Links)
Handles - amzn.to/3PNnGpa
True Position Hardware Jig - amzn.to/3Q5XxS6
Plastic Jig - amzn.to/3BzKdRV
Wire Strippers - amzn.to/3Qaje3C
• Subscribe on KZfaq: bit.ly/SubscribeToTheFixer
• Facebook: / thefixeronyoutube
• Instagram: / thefixeryoutube
• Website: www.thefixerhomerepair.com
• Patreon: / thefixer
• Amazon store: www.amazon.com/shop/thefixer
*As an amazon affiliate I earn commission on qualifying purchases
I use a program called TubeBuddy to optimize my videos in order to make it easier for people to find my content on KZfaq. Are you a content creator and would like to try it?
Sign up here - www.tubebuddy.com/TheFixer
I use Adobe creative cloud to create all my videos.
bit.ly/AdobeTheFixer
My KZfaq gear:
DJI Osmo Action Camera - amzn.to/2Xbp9OB
iPhone 11 Pro - amzn.to/2TYpZhc
Camera tripod - amzn.to/2DwMzC7
Lighting Kit - amzn.to/2XGHuTq
DISCLAIMER:
This video and description contains affiliate links, which means that if you click on one of the product links and make a purchase, I will receive a small commission at no extra cost to you. This helps support this channel and allows me to continue to make videos like this. Thank you for your support!
Videos produced by The Fixer are provided for informational purposes only. All material provided within this video is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. Please use all safety precautions while following any instructions or concepts provided by this video. Viewers must be aware that by doing projects on their homes they are doing it at their own risk and The Fixer cannot be held liable if they cause any damage to their homes. It is the sole responsibility of the viewer to educate themselves on their local codes and regulations before undertaking any sort of project. Always have safety in mind and have fun!

Пікірлер: 109

@acerjuglans383 3 ай бұрын

Clamp your wooden jig to the door/drawer and drill through it. No marking with a pencil, no starting with an awl, no masking tape behind. Put a 3/16" tapered bit in your drill and go. The tapered bit doesn't blow out the back side. I'm a journeyman cabinetmaker, finish carpenter, and cabinet installer.

@stephmo371 Жыл бұрын

I vote knob for the little drawer 👌🏼

@olddrybonez Жыл бұрын

I've been using wire strippers for 30 years and never knew the bolt cutting function. Thank you!

@ctoumi2 2 ай бұрын

lol the same here

@cherylbellardino5211 Жыл бұрын

Knobs for the small drawers.

@TheFixerHomeRepair Жыл бұрын

Thank you for voting! 😁😁

@docdoctme Жыл бұрын

I think the knob looks better for the smaller drawer. Its good you’re keeping busy with projects and taking us along the ride. Thanks for sharing .

@stefaniap.7458 Жыл бұрын

I appreciate you so much. Figured I'd let you know! I'm doing all my home renovation projects by myself and your videos have definitely been a necessity to my success!

@coppertopjohnson9782 Жыл бұрын

I was impressed how you got a 'handle' on the job!!! 😉 Sorry, had to say it. Thanks for sharing your knowledge.

@TheFixerHomeRepair Жыл бұрын

HEYOOOO. Haha I like it. Thanks for stopping by!

@beckyhp7776 Жыл бұрын

Knob on small drawers

@TheFixerHomeRepair Жыл бұрын

Thanks for voting! 😁

@raeannehoffmann968 Жыл бұрын

Knobs.. ty for an awesome video. Tomorrow I'll be working on my cabinets. 🙏

@TheFixerHomeRepair Жыл бұрын

Good luck!

@adamjackson9988 Жыл бұрын

I was screaming make a jig while you were jabbering on about measuring…

@TheFixerHomeRepair Жыл бұрын

🤣

@erikaedwards6241 4 ай бұрын

Thank you! Just got a full set of hardware for my kitchen and have never done it. Loved learning from you - very clear, got everything I needed to know. Subscribed!

@kaic9712 2 ай бұрын

How’d it go!

@user-ix4ic7lq9f Жыл бұрын

I just want to say THANK YOU!!!!!!!

@luckyduckie2000 Жыл бұрын

I'm with team square knob.

@22verayoung 2 ай бұрын

Thank you. I'm replacing knobs for pulls. Will check out Jig.

@lillianmcdonald3121 Жыл бұрын

I've been nervous about doing this on my new bathroom vanity but thanks to you---- I'm "on it"!

@TheFixerHomeRepair Жыл бұрын

Awesome to hear! I really hope the video helps!

@lillianmcdonald3121 Жыл бұрын

@The Fixer thank you! I did it. Not perfect but completed. I have been afraid to do the job but you were super helpful

@beccasmama63 Жыл бұрын

I personally would want a knob for those little drawers.

@jennifermartinus4929 Жыл бұрын

Great, I can use that. Thanks Matt. 😊

@TheFixerHomeRepair Жыл бұрын

No problem! Hope it helps!!

@Genbakachan247 Жыл бұрын

🤣thanks for the outtake! I needed that giggle

@queenreg7 Жыл бұрын

I vote for the knob. Thanks for the instructions- I’m going to tackle drawer pulls soon.

@trolleyproblem7195 Жыл бұрын

19:42 If you don't have bolts with a gap in the thread for cutting (or even if you do), a precaution would be to wind a nut on before cutting. Maybe the thread will be fine. But if not, maybe forcefully unwinding the nut will mash the ragged end back into usable shape. Nicer to have two maybes on your side than one.

@bjess Жыл бұрын

Huge help on the 36” base drawers. Used a jig for all the doors but drawers were concerning

@micheledalley-jackson9791 Жыл бұрын

A square knob centered. Great job.

@lamaterfamilias Жыл бұрын

This was helpful. I just made a template real quick with a random scrap of cardboard. Thanks for the idea!

@anneostsee2764 Жыл бұрын

I like knobs for all upper cabinets and handles for all lower ones. Nice video, greetings from the Netherlands

@cantgetright742 Жыл бұрын

Good stuff like always. Square knobs would probably look good

@jessewbaseball Жыл бұрын

Awesome video very thorough. I would use a knob on the 2 very small drawers.

@ricardodavis4863 Жыл бұрын

Your layout makes the draw handles uniform

@KP-gw5zv Жыл бұрын

Hello. I think for the small drawers the square knob will work well and still fit in with the design. Thank you for taking us along with you on the whole reno of your kitchen. I feel the kitchen is a job well done. Take care and enjoy the new kitchen or should I say the whole new home. Wonder what you will reno now?

@user-jp5ys5mf1f 6 ай бұрын

You're great, thank you so much!

@tblair1642 Жыл бұрын

Square knobs for the small drawers!

@TheFixerHomeRepair Жыл бұрын

Thank you for the suggestion. I think that is what we are going with! Thanks for watching!

@sherrylujasonhardware Жыл бұрын

😆helpful video, for handle installation, how to measure the size and drilling hole is difficult, your bring an effective way👍

@user-lk4xy1kp5h 6 ай бұрын

Thanks. I only have 4 handles to install and 1st way did the trick. 👍👍👍👍

@TheFixerHomeRepair 6 ай бұрын

Good to hear!

@vaniavss Жыл бұрын

Knobs!

@michaelplays2449 Жыл бұрын

Great video, thanks

@TheFixerHomeRepair Жыл бұрын

And thank YOU, Michael, for watching!

@lynnew5619 Жыл бұрын

Knobs for small drawers 👍

@rosezingleman5007 Жыл бұрын

Isn’t there a smaller version of that bar pull? I used three different sizes of the exact same pull on a wall of built-ins in a bedroom.

@trudytyburski844 Жыл бұрын

Thanks

@TheFixerHomeRepair Жыл бұрын

No problem! Hope it helps!

@ricardodavis4863 Жыл бұрын

I vote for the handle It will things uniformed

@yobespierre Жыл бұрын

i like the knob on the smaller drawers, in the center of the panel. but i would want a square or rectangular knob, since the handles are so rectangular.

@crinkle2649 Жыл бұрын

If that was my kitchen I would have you change the direction of the opening of the cookie sheet cabinet next to the oven. And no to the knob since the rest are handles.

@CynthiaSONLAM 2 ай бұрын

You are good！Looking forward to work together🥰

@johnhpalmer6098 Жыл бұрын

I'm team handle all the way, but I'd have gone with something wider than used here, and do them all horizontally like on the drawers with the handles being along the lower rail of the cabinet doors for the uppers (and by extension, similar for the lower cabinet doors up top when not a drawer. That said, uppers will either be open shelving for basic frameless cabinet boxes sans doors and call it a day. 😊

@joannebutzerin6448 Жыл бұрын

I was afraid to do these myself, so I hired someone to do mine. I had all handles as well and wanted them lined up exactly like the ones you did here. Worst mistake I ever made. He did a terrible job, and they were all crooked. Now I have to get up the nerve to fix it myself. This video really helped. Thank you.

@TheFixerHomeRepair Жыл бұрын

Sorry to hear that. 😞 but happy to hear the video helped.

@ericlopez1190 3 ай бұрын

Do I need a nail set or can I just a drill bit?

@jamessurname2285 Жыл бұрын

Go with the knob on the small drawer. With 1.5” countertop overhang a high mounted handle will be partially hidden and look bad imho

@raymond19001 Жыл бұрын

I would prefer the small knob for the smaller drawers

@TheFixerHomeRepair Жыл бұрын

Thanks, Raymond. Pretty sure that is what we are going with! Thanks for the comment and for checking out the video!

@rafaelnunez7084 8 ай бұрын

The small square Knob will work

@dawn5227 Жыл бұрын

A small knob would look better on those small drawers. Something square or rectangular in shape.

@paulpeligri6186 Жыл бұрын

Square knobs for the small drawers

@terrypacker1192 3 ай бұрын

They are called " short & long SCREW'S " !

@seriouslypagan6904 Жыл бұрын

Knob

@gregmize01 Жыл бұрын

Handles are the devil 😈

@ricardodavis4863 Жыл бұрын

I need to get me some of those screws I have never cut a screw that threads back without a problem

@janicetribbiani7535 7 ай бұрын

It's easier for me to use an acrylic ruler rather than the measuring tape for this particular task. Easier on the hands~

@joha7484 Жыл бұрын

❤❤❤

@jeremynguyen2346 Жыл бұрын

Hello

@wendydix5534 Жыл бұрын

♥️

@fabianmckenna8197 Жыл бұрын

If you're making a jig, make sure you drill the holes dead straight otherwise any angles will throw off your measurements. That's what happened in this case but by creating a larger hole in the cabinet, you will give yourself some wiggle room! P.S. I know this by doing three doors and then wondering why they weren't straight........ and I had 35 doors to go.

@nolongeramused8135 Жыл бұрын

The jig I made was a scrap piece of cardboard I cut to size, with a hole in it where I made an X going from corner to corner. Worked great. What got me was when my wife and I were choosing options for the house we were told it was going to be around $1000 to install knobs/handles. I just laughed at them - hell, the ones they were offering were cheap AND ugly, so I wasn't see any upside to grossly overpaying for something anyone could do with a drill and a beer. Took two years, but Costco of all places was selling brushed nickle on brass knobs for about $1.25 a pop, so I grabbed all I needed and installed them the next day after work.

@holliechristopher6946 Жыл бұрын

🌞

@readtheinstructions1407 Жыл бұрын

Stay with the handle and use a file to shave it down to fit correctly, and center it on the drawer.

@stephaniev4444 Жыл бұрын

Question. Are you available for hire? I live in CT.

@jsaysyay Жыл бұрын

me enjoying these vids as always, but constantly interpreting "jig" as "a little dance" for fun, can't help it my brain just works like that

@TheFixerHomeRepair Жыл бұрын

🤣

@georgetarabini6552 Жыл бұрын

A jig isn’t cheating, it’s smart

@Alexmachado503 8 ай бұрын

The home depot have a tool that is already made the holes

@jasnapon 3 ай бұрын

Do the knob bro😄

@lynseyw1061 Жыл бұрын

Square knobs for small drawers 😁

@TheFixerHomeRepair Жыл бұрын

Thanks, Lynsey!

@perrysonier4285 6 ай бұрын

Buy a real $200 jig from Lee Valley It will do every handle for every job opened over and over for years

@BrentAyotte Жыл бұрын

Knobs

@briancolabove2617 Жыл бұрын

Instead of ripping my entire kitchern a part we had New Cabinets And draw fronts made from scratch and added a basic island no water no gas just a place to sit eat amd watch games Do you have have videos that show how to install soft close cab hinges amd ball bearing hinges . I know if enough if I could see.a demo . I've ready cut out a.load bearing wall with no issues. This I just can't get my head around it. 10:10 10:1 I have pictures trying to figure out on how to post them.

@turtuhl Жыл бұрын

a square knob like the other pulls in the center of that small drawer would look nice. I think the round is too different.

@coburn_karma Жыл бұрын

👍👍👍👏👏👏💯

@SraTacoMal Жыл бұрын

22:00: Now I don't know whether the perfectionist in me wants to center each handle within its own half of the drawer or go the equidistant route :\

@TheFixerHomeRepair Жыл бұрын

Yeah thats a tough one.

@PratyushTewari Жыл бұрын

Thank you for not putting knobs. They always catch my earphones and yank it out and hurt me or catch on my side pant pockets and tear my pants. You also can't use knobs if you only have one finger clean and want to open drawers. Knobs for drawers and doors are the worst things you can pick for your house.

@TheFixerHomeRepair Жыл бұрын

Thanks for sharing your thoughts! Maybe they should include a set of airpods when you buy a pack of knobs... 😂 but really, thanks for watching and for the comment!

@carolaguilar1116 6 ай бұрын

Do the knob

@TheFixerHomeRepair 6 ай бұрын

I did! 😀👍

@frankj5947 Жыл бұрын

I vote on “that” instead of “that”

@TheFixerHomeRepair Жыл бұрын

Wish I showed you “this” as well

@Dollybella23 3 ай бұрын

🤕

@skabettispaghetti5451 7 ай бұрын

Why is using a jig cheating?

@ricardodavis4863 Жыл бұрын

Have you lost some weight?

@gregmize01 Жыл бұрын

This is a fake account!!!! Not the REAL FIXER!!!!! This guy didn't say AND WE'RE GONNA DO IT RIGHT NOW and POINT AT ME!!!! Whoever you are, I'm not fooled!!!!

@marlam5371 Жыл бұрын

😆

@TheFixerHomeRepair Жыл бұрын

Did you watch the first 7 seconds of the video?? 🤔🤣

@gregmize01 Жыл бұрын

@@TheFixerHomeRepair welp, i didn't catch that...my bad!

@TheFixerHomeRepair Жыл бұрын

@@gregmize01 haha it’s all good. Thanks for stopping by!