How to install EHS Racing Controller & Barker's Exhaust Yamaha Grizzly 700

Рет қаралды 1,120

Күн бұрын

Hey folks,
In this video I recently get back the Grizzly from some warranty work and now it's time to put back on the EHS controller & Barker's exhaust. This is a step by step of how I've done it and a comparison of the sounds of the stock & Barker's exhaust at the end.
Hope you enjoy.

Пікірлер: 11

@JB-57 Жыл бұрын

Great video bud, very helpful! I plan on doing the same mods to my grizzly and now I'm pretty confident I can do them myself. Thanks!

@longshotadventures763 Жыл бұрын

Hi there .. so happy my video helped.. take your time, related back to the video if you get stuck along the way.. you'll have it installed in no time.

@hartwellking8135 4 ай бұрын

Great video...

@longshotadventures763 4 ай бұрын

Glad you enjoyed it

@francoisvanengelen5648 Жыл бұрын

good day. thanks for the good explanation. I have a question. where did you buy the mirrors. or what is the brand of the mirrors. Thanks in advance from the Netherlands

@longshotadventures763 Жыл бұрын

Hi there. Thanks for the comment and question.. the mirrors are "Moose" brand and I bought them from "FortNine.ca" they were running about $60 each last year..

@Alexb_1775 8 ай бұрын

Still no problems and happy with everything?

@longshotadventures763 8 ай бұрын

Hi there.. Yes, after 3 seasons of running these mods, everything is still working great.. and very happy with the improvements they made.. thanks for the question

@dangriesemer3710 2 ай бұрын

I know this is pretty old but I'm installing the same setup now, does your barkers exhaust flop around and bang off the shock with your spacer bushing installed like that?

@longshotadventures763 2 ай бұрын

Hi there. Thanks for the question. Yes, unfortunately, I couldn't use the big spacer they provided and used a couple of smaller ones that I had in the shop, so the clamp would be tight around the muffler, and that helped. It still moved a slight amount, but nothing like it was with the provided spacers.

@dangriesemer3710 2 ай бұрын

@longshotadventures763 I was able to put the exhaust band around exhaust, put bolt through both holes, then spacer bushing on bolt and thread it to the frame. Tightened it down and it's rock solid and spaced away from the shock with plenty of clearance. They may have sent me a different spacer bushing but it looked similar to the one in your video. Thanks for responding.