How to install Elite-1 Fender Eliminator on a 2009-2014 Yamaha YZF R1 by TST Industries

No video

How to install Elite-1 Fender Eliminator on a 2009-2014 Yamaha YZF R1 by TST Industries

Рет қаралды 20,589

Күн бұрын

This awesome fender eliminator for thr 09-14 Yamaha R1 gives you the choice of multiple mounting locations and license plate angles.
For more info please see: tstindustries.c...
Make sure to subscribe here: bit.ly/1jq2ZrN
Follow us on Facebook here: on. 1nuTjlF
If you want to delete your fender and replace it with a high-tech tail tidy that allows you the freedom to choose your license plate position and angle then TST Industries has you covered. Our fender eliminators are CNC machined out of aircraft grade aluminum alloy, then anodized for a great looking and durable finish. We hope that you enjoy our video and check out the product page on our site for more info and photos (link at the top of this video description).

Пікірлер: 47

@AznParkSkier 8 жыл бұрын

If you snug the bolts light/tight enough you could have a pretty good flip kit if you want to reach back by hand. haha.

@TSTindustries 8 жыл бұрын

+Nathan illest Yea but then the screws would probably vibrate out easily

@ticoruizsuarez 4 жыл бұрын

Can you guys make a 2nd configuration without the passenger pegs?? I don’t have pegs on mine and looking to have my plate relocated like the 2nd configuration like the video

@devronbaten9333 6 жыл бұрын

Just installed mine. I don't know how you got that nut on the screw for the closeout so effortlessly.

@TSTindustries 6 жыл бұрын

I just held it in place and rotated the screw from the outside

@devronbaten9333 6 жыл бұрын

TSTindustries I put the screw on a L wrench and slid it over the screw. I love the look of second configuration.

@TSTindustries 6 жыл бұрын

good deal man!

@zayaya3594 2 жыл бұрын

Спасибо! Побольше делай видео на разные мото! Хорошего дня!

@loquendero718 4 жыл бұрын

try to buy it on their website, but it is not in stock, :( when will it be available again?

@TSTindustries 4 жыл бұрын

Unfortunately the factory is having trouble keeping up right now. We have been selling 4-5 times faster than they can supply. Your best bet is to drop your email into the notification box on the product page. As soon as the parts are marked back in stock our system will send you an email. I would say at that point be ready to snipe because they are going to go fast.

@rroadrider15 7 жыл бұрын

hey tst I bought your guys plate holder and saw right above that reinforcement pice that theirs a plate missing that has a hole to the battery would u guys now the price number?

@TSTindustries 7 жыл бұрын

go to MRcycles.com and navigate to your bike model/year. The microfiche on that site is easy to navigate and prices are good. That is where we get our OEM parts.

@craigcadman3613 7 жыл бұрын

I will thank you

@fonzhurt6280 5 жыл бұрын

I have a 2004 and I don't have that small metal spacer at the foot pegs.

@fonzhurt6280 5 жыл бұрын

The bottom of this tail looks nothing like my bike. I have 4 holes at the end of the tail, not 3 and one 1" hole close to the tail light.

@nicholastorres3966 8 жыл бұрын

Will the low mount option still be visible if my bike is lowered 2"???

@TSTindustries 8 жыл бұрын

that is touch to say without trying it on there. I would not recommend the lower setup with a lowered suspension though. It may not have enough clearance for the license plate in that location.

@Marksman2oo7 9 жыл бұрын

I would have to have a light to illuminate the the plate, it sucks that this doesn't have one :/

@TSTindustries 9 жыл бұрын

we sell these kits with and without license plate lights. The installation video does not show the license light installation because we have a separate video for that.

@craigcadman3613 7 жыл бұрын

Will this still work if the rear pegs are removed?? only got the r1 yesterday so not sure what parts would remain if I removed the pegs

@TSTindustries 7 жыл бұрын

Craig Cadman is the dogbone shape link that goes between the rear pegs still present on your bike?

@craigcadman3613 7 жыл бұрын

I still have my legs fitted but if I removed them can I still leave the bar on?? Or does it have to be removed??

@TSTindustries 7 жыл бұрын

Craig Cadman I believe that you can keep it in place. Then our fender eliminator attaches to that link.

@TSTindustries 7 жыл бұрын

I just checked all the microfiche for those components. When you remove your footrests the link will have no place to mount. I remember a customer that was in this situation. He had to use longer screws to screw through the subframe into the fender eliminator hinge bosses and that allowed him to still install our fender eliminator on that setup. I hope this helps.

@craigcadman3613 7 жыл бұрын

Thank you very helpful I will just grab a couple of longer bolts 👍👍👍👍

@rroadrider15 7 жыл бұрын

what if I don't have the part for the lower option what would that pics be called?

@TSTindustries 7 жыл бұрын

That part is called "Reinforcement" by Yamaha, and the part number is 14B-27469-00-00. You can get that at MRcycles.com

@rroadrider15 7 жыл бұрын

Hell yeah thank you guys, love you guys

@minimister8764 5 жыл бұрын

2011 r1 toce fender eliminator with tst industrieslicenseplate light

@TSTindustries 5 жыл бұрын

This video shows the installation of our own TST Industries fender eliminator.

@seymourclarkson2336 4 жыл бұрын

$99 bucks for this?Are you fucking shitting me?!!!!!!!!

@TSTindustries 4 жыл бұрын

CNC Machined, anodized black, fully adjustable, and allows mounting in two locations. OR you can spend $17 on our standard one, choice is yours.

@seymourclarkson2336 4 жыл бұрын

TSTindustries I’ll just save my money and make my own.I ain’t paying $100+ for a damn license plate mount

@TSTindustries 4 жыл бұрын

@@seymourclarkson2336 that's cool

@carlosaviles7217 5 жыл бұрын

Sick!!!!!!!!!!!

@o0oPau 9 жыл бұрын

Nice exhaust pipe,.

@TSTindustries 9 жыл бұрын

+o0oPau Thanks. We have a bunch of them ready to ship from our warehouse.

@TSTindustries 9 жыл бұрын

You can see more info on the exhaust here: tstindustries.com/Toce-T-Slash-Exhaust-Yamaha-YZF-R1-2009-2014.html

@UnPhasable 9 жыл бұрын

Haha Bart you weren't lying when you said everyone asks about the ratchet.

@TSTindustries 9 жыл бұрын

we should just start having it for sale to make it simple for the folks that want that tool.

@simeonk3027 3 жыл бұрын

$100 for a lil bracket bruh y’all trippin

@TSTindustries 3 жыл бұрын

It's more than just a "lil bracket" but to each their own! Ride safe out there.

@T_Z_C 9 жыл бұрын

What kind of ratchet is that?

@TSTindustries 9 жыл бұрын

+WHITE LIGHTNING A number of companies made it under license from whoever invented it a couple years ago. I think at this point only Stanley tools still offers it. Look up Stanley tools...these aren't too expensive and make every job easier.

@T_Z_C 9 жыл бұрын

+TSTindustries thank you

@TSTindustries 9 жыл бұрын

+WHITE LIGHTNING no problemo