How to Install Gemstone Lights

No video

How to Install Gemstone Lights

Рет қаралды 6,842

Nate Willard

Жыл бұрын

www.lightingwithpremier.com
www.GemstoneLights.com

Пікірлер: 22

@Theshortyism Ай бұрын

Would love to see more houses done.

@timothymason5545 7 ай бұрын

I have gemstone lights and wondering what the controller/ Box looks like inside if I ever wanted to use them with a diy controller at some point.

@StevenTheSinner 6 ай бұрын

Show the wago points. Did you drop the power line in at 75 feet? Or did you bite the 75 foot power line in every 25 feet for a max of 75 feet per tap? Did you inject power after the first two lights and then every twenty five feet up to 75 per terminal? I was under assumption that the first 75 feet were powered off the heart via the male female plug. And the first terminal jumps onto the line after the first 75 feet. Basically the heart powers the first 75 feet and then injection powers the next 75 feet. Total of 150 off one tap and one male female line out of the heart. If more are needed, tap the second terminal and run that line to 150 foot mark. And that will power the next 75 feet making a total of 225. With two extra taps not used. I’ve been told to no go past this point. I could be wrong. This has been explained several different ways and never the same way. I’d like to actually install the product correctly.

@eddydelarosa1820 9 ай бұрын

Can you please make a video of you cutting the track 45 1 1/2 track

@estuardoone Жыл бұрын

Can you make a video of wiring the power wire and lights together I need to understand that if you don't mind. Do you guys solder the wires together? I can teach you how to roof your house for a trade

@natewillard Жыл бұрын

I can make a video about when to tie in power, but I can't reveal any trade secrets about how we tie in. You can splice directly into the positive and negative with some wire connectors like this: www.amazon.com/Wire-Connectors-Solderless-Stripping-Connection/dp/B07114RK67/ref=sr_1_14?crid=GHLQ475SA75Y&keywords=wire+connectors&qid=1678043398&sprefix=wire+conn%2Caps%2C136&sr=8-14. Be on the lookout for a video talking about power wires!

@estuardoone Жыл бұрын

@@natewillard thanks brother

@patrickcherry2308 8 ай бұрын

how do you get to peaks over peaks?

@freelanceweb9139 Жыл бұрын

How to buy this light

@WhitePOWERranger1 7 ай бұрын

With money

@gannong1 7 ай бұрын

Can you buy gemstone lights? And self install?

@natewillard 7 ай бұрын

You cannot buy direct unless you are a dealer. If you buy it from a dealer they usually charge a lot. I started my own business because of this issue. I now buy and sell my own brand of lights.

@josemartinez-gr1cz 9 ай бұрын

We’re do we buy these tracks and lights????

@natewillard 9 ай бұрын

I sell them. Let me know what you need and I can make an order for you

@StevenTheSinner Жыл бұрын

Are these lights able to have the light meet in the 45 degree cuts? So that the lights have peak in the peaks. I have ocd and want the lights to begin at peaks and go down each way from the peaks evenly.

@natewillard Жыл бұрын

I always start at the peak so that the lights won’t on both sides. But as for corners, you don’t want to cut them to meet perfectly. You always should shoot to have the lights 9” spaced, even around corners. Otherwise it will look silly having the light be too close or two far apart. Overall it depends on where each light lands and adapting as you go.

@gabrielgarza5257 Жыл бұрын

Yes !

@natewillard Жыл бұрын

🙏

@gabrielgarza5257 Жыл бұрын

More information on how to install the box and long jumps Etc.

@natewillard Жыл бұрын

I've been asked to not share too much information and reveal trade secrets. But the box is very straight forward to install and you need to tie in power every 30 feet as a rule of thumb.

@davidfleck1654 8 ай бұрын

So is it a home run back to controller every 30 feet of lights or just one wire through and tap off every 30 feet. 1 @@natewillard