Amazing work guys! Top notch products used 😉😉

Great and helpful video. Thank-you.

Thank you

So are these bathrooms being waterproofed both under and also on top of the screed??

Gripset are the only company that teaches the right way to waterproof wet areas and how to recess for the run off into puddle flanges. I learnt from my experience of doing my own bathroom the Gripset way. Good work Gripset👍

That was good mate. I haven't had much to do with waterproofing so interesting. Plenty of painting involved might suit me. The young bloke sure put a flood coat of sealer on. Is it a PVC type sealer like bondcrete?

Hi. I was just wondering, upto what height is recommended for walls in WC and Powder room?

Nicely done, what was in the tube gun when installing the tile door metal strip? (@13.23)

What type of primer can use on sand n cement Bedding please

Hello Do you have to achieve a 12mm cove with that product? I seem to get mixed opinions. Great work guys

Wow!! Is that true that we need for a diffe3rent membrane type for just plastic puddle flanges, please? I`ve never heard this before! All what I know is... we need to use a special primer for plastic surfaces to enhance bonding to w/proof membrane. And, as I see, no every single manufacturer has such special membrane for plastic :)

I bet you laid the second layer over those dusty foot prints. Edit: yip, ya did.

What is the standard industry way for applying the waterproofing - over or under the screed. You have gone under here but can that lead to permanently wet concrete/screed and a damp smell?

Great programme,the only problem is that you have everything on the floor and cannot see it

If a tile bed needs to be laid for floor fall is it done before or after this water proofing step?

I have decided to use this system. Is there a reason for not applying the membrane over the tape around the window?

When doing my waterproofing qualification - I was taught that no plasterboard setting compound should be used anywhere the waterproofing membrane is to be installed. The reason for this is that the setting compound will re-emulsify and turn to slop when it comes into contact with the primer or membrane - this will stop the primer & waterproof membrane from adhering properly. In this video, you can clearly see the difference in the set joins on the wall before and after the primer is installed. The topcoat has been broken down by the primer and turned to slop. Much better to leave all the wet areas with bare plasterboard/villaboard and let your waterproofer seal all the sheet joins, niches, internal/external corners with a flexible sealant.

G'day, It's 2023 now and I've noticed through watching Australian inspections getting done on KZfaq that they are saying internal corners require a 12mm curve as per Australian standards.

At 6.25 minutes in butle tape is used on floor wall junction, and thereafter jointband is used. So why was the butle tape used at 6.25 minutes in?

Can you use the tape over the waterproofing membrane? Not a tradie here Just a DIYer

If builders have already installed vanities, door jams, arcs etc what do we do then?

The young fulla doesn’t mind loading up the primer. Bloody hell !!

what about bedding!

Old video I know but you cant go over plaster.

I've never seen someone use aqua check in the actual shower, strange

0:58 You need knee pads for this job.

Nice product , maybe some of that tape can keep that young blokes shorts up over his underpants

No 12 mm transition, non-compliant gotta rip out the whole thing out. (Joke)

Where’s the water stop angle at doorway and shower recess?