How To Install Harley Davidson Cam Cover-DIY-Biker Podcast

  Рет қаралды 72,520

Ryan Urlacher

Ryan Urlacher

7 жыл бұрын

In this free DIY video we show you how to remove your stock Harley cam cover and replace it. We did this because we were tricking a Street Glide out with all black parts. Make sure you have a new gasket ready to go and some oil to replace what you loose when removing it.
Save yourself a ton of money by not having to take your Harley to the dealership to have these types of projects done. You can do this right in your very own shop or garage and right on the kickstand. Plus, have the absolute satisfaction of wrenching on your own Harley!
GET OUR HARLEY MAINTENANCE OIL CHANGE VIDEO HERE: www.lawabidingbiker.com/2014h...
IF YOU APPRECIATE THIS FREE VIDEO AND IT HELPS YOU, PLEASE SUPPORT US ON PATREON AND GET BENEFITS: / scrappy
GET ALL OUR FOR PURCHASE VIDEOS HERE: www.lawabidingbiker.com/buyvi...
CHECK OUT THE LAW ABIDING BIKER STORE HERE: shop.lawabidingbiker.com
HERE IS THE EXACT PART WE USED FOR THIS PROJECT: shrsl.com/?~cj6n
TO FURTHER SUPPORT US, PLEASE BUY ANY MOTORCYCLE PRODUCTS THROUGH OUR AFFILIATES. NO ADDITIONAL COST TO YOU:
REVZILLA: www.lawabidingbiker.com/reviz...
J&P Cycles: www.lawabidingbiker.com/jandp...
MOTORCYCLE SUPERSTORE: www.lawabidingbiker.com/motor...
AMAZON: www.lawabidingbiker.com/amazon
ADVENTURE HARLEY DAVIDSON: www.lawabidingbiker.com/adven...

Пікірлер: 29
@Mr.Phoreskin
@Mr.Phoreskin 2 ай бұрын
Thank you sir. That’s a clean scooter!
@rolandjosef7961
@rolandjosef7961 4 ай бұрын
Thank you for showing us this video. But this looks very messy to me. If ever I worked on mine, I would let the bike lay on the left side to avoid oil from spilling then remove the cam cover .
@keystonedaytrip238
@keystonedaytrip238 6 жыл бұрын
Very interesting 👍 I plan on continuing the blackout on my bike this winter along with many other mods . This is very useful stuff - as all your videos are .
@christopherhiggins8262
@christopherhiggins8262 4 жыл бұрын
You guys do great work man. Thanks.
@RyanUrlacher
@RyanUrlacher 4 жыл бұрын
Thanks brother. We appreciate it! Ride safe & Ride Often! Check out this KZfaq Channel as we have a ton of free videos for you! Check out our useful for purchase videos: www.lawabidingbiker.com/buyvideos BECOME AN EXLUSIVE MEMBER-GET BENEFITS: www.lawabidingbiker.com/patreon Leave a flat donation: www.lawabidingbiker.com/donate Shop in the Official Law Abiding Biker Store: shop.lawabidingbiker.com Subscribe to the Law Abiding Biker Podcast: www.lawabidingbiker.com/app Join our free email club: www.lawabidingbiker.com/emailclub
@bodeans59
@bodeans59 7 жыл бұрын
Another great video. That bike seriously needs some Bike Brite and Bug Slide!!
@RyanUrlacher
@RyanUrlacher 7 жыл бұрын
LMAO....no doubt on the Bike Brite and Buglside....thanks for watching! shop.lawabidingbiker.com
@mattgardner3763
@mattgardner3763 4 жыл бұрын
Thank you for this video. Can you post a link for the 12 point fasteners you are using here?
@davedeja
@davedeja 7 жыл бұрын
That bike needs some BugSlide! Thanks for the video, great job. You swapped out the trans cap too. Sneaky...
@RyanUrlacher
@RyanUrlacher 7 жыл бұрын
LMAO, you are right on that davedeja!! Love it. Thanks for watching. BUGSLIDE RULES: shop.lawabidingbiker.com/collections/bugslide
@mark2graves-MC
@mark2graves-MC 2 жыл бұрын
10:25 torque info - thank you!
@RyanUrlacher
@RyanUrlacher 2 жыл бұрын
You're most welcome. Ride safe & Ride Often! Check out this KZfaq Channel as we have a ton of free videos for you! Check out our useful for purchase videos: www.lawabidingbiker.com/buyvideos BECOME AN ECXLUSIVE MEMBER-GET BENEFITS: www.lawabidingbiker.com/patreon Leave a flat donation: www.lawabidingbiker.com/donate Shop in the Official Law Abiding Biker Store: shop.lawabidingbiker.com Subscribe to the Law Abiding Biker Podcast: www.lawabidingbiker.com/app Join our free email club: www.lawabidingbiker.com/emailclub
@jimmyjennings4089
@jimmyjennings4089 5 жыл бұрын
any videos on changing older cam covers and replacing them with a new one of the Same I have a 79 shovelhead 74 cubic inch 1200 cc that I think is bad because I've put 3 cam oil seals in and it's still leaking, I know I haven't put 2 oil cam seals in wrong so I think it's the cover that is scratched or dented where it wont seal anyone.
@prolife8079
@prolife8079 4 жыл бұрын
hello, great video, i have a question and need your advice, i am blacking out all parts on my street glide and it has been off for quite some time, i will be doing oil change afterwards, does it require the engine to be warm or in cold state? should i put back on the pipes and run the bike for 1 minute to get the engine warmed up ? iam just concerned to run the bike while loosing the little amount of oil while installing the new cam cover, please advise
@andrisenn768
@andrisenn768 4 жыл бұрын
Happy new year to you Ryan!! Thanks for all the videos, you guys are awesome! I want to powdercoat my cam and transmission cover. Do I need to drain the engine and/or transmission oil first? Thanks
@RyanUrlacher
@RyanUrlacher 4 жыл бұрын
Pre 14 there is oil behind the trans cover. 14 and on just a cover.
@arizonadesperado7171
@arizonadesperado7171 6 жыл бұрын
Hi, What is the purpose of the "raised" area of the cam cover the 5 screw disc mounts on? I need to replace my cover. Thanks, Mike M
@paulbodman3335
@paulbodman3335 6 ай бұрын
on my 2021 fxst the oil cooler is in the way of exhaust manfold bolt so can i take cove off with exhaust still on bike?
@sacaroni741
@sacaroni741 3 жыл бұрын
What did you use to keep the gasket stuck to the bike while you put that cover on?? I wanna know what the best stuff is to use or should I put the gasket on with out anything?
@ChisungLee
@ChisungLee 4 жыл бұрын
my cam cover cracked today on the freeway, bike didn't die. Saw white smoke. What would cause cam cover to crack?
@arthurleino
@arthurleino 3 жыл бұрын
I installed a new cover on my Shovelhead. Today while riding, some of the bolts came loose. Oil went everywhere!.
@rollinggordo9945
@rollinggordo9945 2 жыл бұрын
How long of a process is this total?
@phillipdonohue5
@phillipdonohue5 7 ай бұрын
What is the little cover called?
@rollinamerica
@rollinamerica 4 жыл бұрын
If you leaned it over on the jiffy stand do you think you would still loose oil?
@rogerburns8478
@rogerburns8478 Жыл бұрын
Yes you will just not as much. Its less than a quart on the side stand.
@Ahdickerson
@Ahdickerson 7 жыл бұрын
which of the three holes do you add the oil back too? or does it matter?
@RyanUrlacher
@RyanUrlacher 7 жыл бұрын
The engine Andy.
@bryanmortensen8527
@bryanmortensen8527 Жыл бұрын
This is a twin cam engine correct?
@michaelhirschberg6895
@michaelhirschberg6895 3 жыл бұрын
Why not black hardware
Install New Hand Grips on Harley Davidson | Motorcycle Biker Podcast
10:00
WORLD'S SHORTEST WOMAN
00:58
Stokes Twins
Рет қаралды 83 МЛН
Red❤️+Green💚=
00:38
ISSEI / いっせい
Рет қаралды 85 МЛН
Clowns abuse children#Short #Officer Rabbit #angel
00:51
兔子警官
Рет қаралды 79 МЛН
How To Install A Derby Cover On A Twin Cam Harley Davidson
5:11
J&P Cycles
Рет қаралды 152 М.
Willie G Derby Cover & Timer Cover
11:57
CHIKO HARLEY
Рет қаралды 12 М.
Harley-Davidson Timer Cover Replacement / Install
4:39
BLOCKHEAD
Рет қаралды 60 М.
How to Reassemble Top End Harley Twin-Cam (99-17)
6:58
DeathProof Productions
Рет қаралды 27 М.
What oil should I run in my Harley
13:44
Gary Cave
Рет қаралды 37 М.
How To Install 12 Inch Handlebars 2022 Street Glide Special
22:48
Ride it Wrench it
Рет қаралды 119 М.
Installing and adjusting S&S Quickee Pushrods on a Harley Davidson
31:36
Exhaust Tips GLE 63s
0:19
Straight Piped by: Gexhaust
Рет қаралды 2,1 МЛН
Manual installation process of highway guardrail
0:15
mianxiwei
Рет қаралды 11 МЛН
Le geste réconfortant d'un motard lui vaut un cadeau inestimable #shorts
0:22
Les meilleures astuces de Fabiosa
Рет қаралды 20 МЛН