How To Install Khrome Werks Dominator Exhaust On A 2015 Street Glide

Рет қаралды 4,829

Күн бұрын

How To Install Khrome Werks Dominator Exhaust On A 2015 Street Glide. In this video I decide to upgrade from Cobra True Dual Exhaust to the Khrome Werks Dominator Exhaust. I felt like it was time for a change and Khome Werks did not disappoint. Their exhaust systems are designed to provide improved performance and sound compared to the stock exhaust system on a motorcycle. Khrome Werks offers a variety of exhaust systems for different motorcycle models, including slip-on mufflers and full exhaust systems. Some of their exhaust systems feature a high-flow muffler design, which allows for increased exhaust flow and improved performance. #howto #harleydavidson #sinisterclutch
Khrome Werks Dominator Exhaust: PN - 1800-1963
www.dragspecia...
www.khromewerk...
Exhaust Port Gasket Tool - Tony Cox KZfaq Channel
• Harley Davidson Exhaus...
Music: www.bensound.com/
Instagram - / sinisterclutch
Videezy.com
Racing Sport Gaming | RACING by Alex-Productions | / @alexproductionsnocopy...
Music promoted by www.free-stock...
Creative Commons Attribution 3.0 Unported License
creativecommon...
DISCLAIMER:
Under no circumstances will SinisterClutch be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by SinisterClutch or a third party. In no event shall SinisterClutch be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of SinisterClutch, it cannot guarantee against improper use or unauthorized modifications of this information. SinisterClutch assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. SinisterClutch recommends safe practices when performing any mindfulness, physical, or financial activities seen or implied in this video. Due to factors beyond the control of SinisterClutch, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of information contained in this video is the sole responsibility of the user and not SinisterClutch.

Пікірлер: 46

@larry68hd11 Жыл бұрын

Great job Randy. Thanks for sharing

@SinisterClutch Жыл бұрын

Thanks Larry! Hope you are well ✌️

@theoldmanflynchmotovlog4846 Жыл бұрын

I'm trying to decide what exhaust I need, I'd like to maintain the quiet exhaust but still improve performance. On long trips, loud exhaust grates on my nerves. I definitely like the looks of Klockworks exhaust.

@SinisterClutch Жыл бұрын

Don’t get TAB Performance with zombie baffles. They are crazy loud

@Ucmpigs Жыл бұрын

Great install! Man, I hate replacing those gaskets…I’ve jacked up my share of them😂 sounds NICE! And looks great!

@SinisterClutch Жыл бұрын

I was super nervous about those gaskets. Patient and prayers got me through it 😂😂. Definitely happy with the exhaust.

@GoofyBastard Жыл бұрын

Great job Randy!!! They look and sound great

@SinisterClutch Жыл бұрын

Appreciate it brother. Definitely a noticeable difference in sound ✌️

@Wind.Road.Therapy Жыл бұрын

Nicely done Randy and they sound great ‼️

@SinisterClutch Жыл бұрын

Yeah I’m really happy with them. Great exhaust 🤘

@HDVIBE Жыл бұрын

Looks and sounds awesome Randy. Enjoy it. Ride safe👍👊✌️

@SinisterClutch Жыл бұрын

Thanks Rick. I’m ready for a long ride that’s for sure. Take care✌️

@HDVIBE Жыл бұрын

@@SinisterClutch 👊✌️👍

@TechNickRides Жыл бұрын

Excellent details on the install Randy. Wow what a difference in sound! 🏍️🎵🎸🇺🇸🤘👍

@SinisterClutch Жыл бұрын

Yeah big difference in sound. Appreciate you watching ✌️

@BlackphoenixEntertainment Жыл бұрын

Nice install, didn't seem to bad for what it is. Looks and sounds great.

@SinisterClutch Жыл бұрын

Oh there was a little aggravation here and there ha. I’m not sure any install goes smoothly.

@OZARKSHDRIDERS Жыл бұрын

Nice install brother.... With out a doubt the Chrome Work's definitely sounds better than what you was running.... And it look's good too👊🏽😎

@SinisterClutch Жыл бұрын

Yes it does! Just needs some more miles to test it out.

@ThrottleFiend Жыл бұрын

Great install, you made it look relatively painless. I’m sure I would’ve had to cut out a few choice cuss sessions. 😂 I agree the KW exhaust definitely sounds better than the Cobras you had on there before. Some of those bolts are in such small places I’m not sure if I could get my hands to be steady enough. And for the record, I’d have used a pick too. 😎

@SinisterClutch Жыл бұрын

Yeah definitely requires patience. The filming was the roughest part 😂😂. Making sure I captured everything. Yes I cussed a few times. Appreciate it Derek. ✌️🤘

@CDLNEPA Жыл бұрын

Nice install. Looks and sounds good

@SinisterClutch Жыл бұрын

Much better than what I had. 🤘🤘✌️

@BluegrassRiders Жыл бұрын

Good video, 2 questions, how much trouble was the front header pipe nuts with the lowers on? And what tuner are you going with? I still have 10 months on my warranty so I’ll probably change mine out in the fall

@SinisterClutch Жыл бұрын

I was able to use a socket extension and send it through the vent of the lower so no trouble at all. I’m using the Harley Screaming Eagle Pro Street Tuner.

@SinisterClutch Жыл бұрын

I wanted to add the Dyno Jet Power Vision Tuner allows you to buy different license for each bike you have. I didn’t know that when I bought my tuner years ago. I’d consider that one if I was you

@BluegrassRiders Жыл бұрын

@@SinisterClutch that’s the one everyone seems to recommend, I still have 10 months on my warranty so was thinking about going to the Harley tuner until my warranty runs out and then doing the head pipes and the PV4 once the warranty expires

@hd_av_traveler1495 Жыл бұрын

awesome video as always

@SinisterClutch Жыл бұрын

Appreciate it bro! Thanks for watching and all the support.✌

@MRGS48 Жыл бұрын

Swaeeeet!!🤘🤘

@SinisterClutch Жыл бұрын

🤘🤘🤘🤘

@JaySorsby1 Жыл бұрын

I can’t decide between pipes or shocks. Not enough money for both, the struggle is maddening.

@SinisterClutch Жыл бұрын

I recommend shocks! Comfort is key

@northbysoutheast5439 Жыл бұрын

😎👍

@SinisterClutch Жыл бұрын

🤘🤘🤘

@sprinky216 6 ай бұрын

Hi, just bought this exhaust system. I unboxed the slipons and took the end caps apart and pulled out the insides. It was wrapped in fiberglass and steel wool. I took all that off and disposed of it. I then put the inside back in the slip on. My question is, is the inside part the baffle, or is there a baffle you have to buy that goes inside of that? People say they run these without a baffle so I was just wondering what exactly that meant.

@SinisterClutch 6 ай бұрын

The baffles are there from factory. I never took the baffles out of mine. The exhaust sounds awesome. People do it for the sound.

@marco-tiopet4020 Жыл бұрын

👍✌

@SinisterClutch Жыл бұрын

Thanks Marco✌️

@dondasher58 9 ай бұрын

Randy, I looked thought the comments and didn’t see the answer to my questions so forgive me if it’s been asked. What baffles do they come with or which ones did you use? I tried the link and it says it can’t be found. Is your a stage one or two? I’m looking at upgrading my 117 motor on the CVO and I like the sound of your bike and Kromewerks quality and customer support. I also need a tuner and from what I read it appears the powervision may be the one to go with as opposed to the screaming eagle. Any info would be appreciated.

@SinisterClutch 9 ай бұрын

I updated the link in the description so it works now. But keep in mind I have a Twin Cam not an M8 so the link is for the Twin Cam exhaust. The baffles are the standard Khrome Werks baffles. I know they offer other baffles but I didn't order anything different. As far as tuner I have the Harley Performance Tuner but if I had to do it over I would have gotten the Powervision because you can buy a license to tune another bike say if you have two or more. Oh and I just have a stage 1 on my bike. Let me know if you have more questions. Happy to help!

@dondasher58 9 ай бұрын

Thanks for the reply. I know I still have warranty and may even extend it which kinda locks me into screaming Eagle upgrades. I’m actually at Man o War waiting on my bike. I figured since I just bought this bike (300 miles ago) used I would let them do the 10k service. The Winter rates help😂 I may just get some KW slip ons and put them on myself this winter. I can always build up from there with whatever tuner and stage I want to go with I guess. I know the SE stuff is restricted with all the EPA stuff but they are a little better than stock. Heck the KW slip ons may sound decent with the 117. 😊

@SinisterClutch 9 ай бұрын

@@dondasher58 I replaced my whole system. I think you’ll be fine with the slip ons and stock headers. I love the sound of them and seem to be getting really popular. That EPA crap sucks. I understand on the warranty especially if you travel long distance. My warranty expired a long time ago. Take care and enjoy the ride🤙🤙. Sounds like you live in KY

@dondasher58 9 ай бұрын

Yes sir I’m a few miles from Man o War Harley. I have ridden several of the areas you have videos of👍🏼