How to Install LED DRL+Sequential Turn Signal With Relay Contactor Into Any Car's Headlights

Рет қаралды 8,183

Жыл бұрын

I explained how to use 5-pin relay contactor to wire up LED lights as DRL for any car without DRL.
**Relay Connections**
Pin 86 === Headlight Positive Wire
Pin 85 === Ground
Pin 30 === +12V ACC
Pin 87a == Positive ( Red wire) of LED as DRL
Pin87 === No Connection
Wiring diagram: drive.google.com/file/d/1uJQC...
Support my channel, purchase directly from our online store
LED Strips: eazidiy.square.site/product/2...
Kindly use my affiliate links below for your purchase, it helps me with a little commission. Thank you!
Amazon Links
LED Strips amzn.to/3BHLwy4
Wire taps: amzn.to/3mdN7CZ
5-Pin Relay : amzn.to/3lNiVlF

Пікірлер: 35

@jeremyraeber4234 12 күн бұрын

I can't thank you enough for making this video. You have no idea how much I search KZfaq and Google to find something like this. I search for almost 6 months before I found you and now can install my DRL LED Switchback headlights in my vehicle. Thank you thank you thank you

@eazidiy 12 күн бұрын

I really appreciate your comment. Thank you.

@PogoLoco88 6 ай бұрын

Been looking for a easy diagram and demonstration to put DRL on my car and you sir delivered. thank you !!!!

@eazidiy 6 ай бұрын

You are welcome. Thanks for the feedback!

@bunzthompson236 4 ай бұрын

Great instructional video mate and great diagram, I've been looking for video for this wiring set up as my sons ute failed its wof or (vehicle inspection) otherwise known,as due to New Zealand laws stating Drl must no stay on with headlights I've googled and youtubed but some guys get to complexed with their instruction. Thanks bro I will try this week

@eazidiy 4 ай бұрын

You are welcome 🙏🏾

@dawalaweerasinghe3805 10 ай бұрын

Thanks for the video. Exactly the one i was looking on. Is one common relay enough or 2 drl light strips left and right? Or should use 2 relays for left and right? I have same strips as you.

@eazidiy 10 ай бұрын

Yes, you can use one relay for both lights. You have to manage the run of wires well.

@dawalaweerasinghe3805 10 ай бұрын

@@eazidiy sure thanks. Subscribed.

@eazidiy 10 ай бұрын

Thank you, please give an update of the final installation if you can.

@FranciscoGonzalez-uk5bk Жыл бұрын

Hello so I’m having a really hard time making my DRL lights come on as turn signals .. I can’t not get it at all .. the headlights I bought are after market which are these PENSUN For Toyota Sienna 2011-2020 LED DRL Sequential Signal Headlight Assembly but don’t have all the connections just has the low beam n high beam and signal wire connection but no DRL connection please help

@eazidiy Жыл бұрын

Hi, unfortunately I wish I can see the headlight to assist you. Please follow the relay diagram in the video.

@litdoe7021 9 ай бұрын

I want to power a DRL same like on this video. Can i run the red wire to an existing relay on cars fuse box and connected to pin 30 only so the DRL stays on only when the ignition is on?

@eazidiy 9 ай бұрын

Yes you can but make sure the fuse to use is energies when the car is running. Otherwise, you will drain your battery if it connected to a constant 12V

@spencerorme435 5 ай бұрын

Great video so a quick question if you don’t have it connected to the headlight (number 86 on the relay). Will it still Work just never go off until you turn the car off?

@eazidiy 5 ай бұрын

Pin 86 is your signal trigger for relay to switch from 87a to 87. Yes the LED strip will stay on until car is turned off.

@spencerorme435 5 ай бұрын

@@eazidiy I want mine on at all times and only turn off when I turn off the car. Now here’s a question is a relay technically needed couldn’t I wire it and use a piggy back fuse?

@eazidiy 5 ай бұрын

You don't need relay for that then. Just ensure you tap to 12V ACC not directly to the battery (Constant 12V)

@adrian14639 6 ай бұрын

I try this step by step but the drl didn’t work that way any strip light in specific?

@eazidiy 5 ай бұрын

Check the state of the relay output before connections. Is it at 87 or 87a? Your relay must match the kind I used in the video. Otherwise, swap the pins.

@swmkhwrgoyary3642 Жыл бұрын

Dear Brother, if I connect without switch.... means connect to positive wire to direct headlight then... Pin 30= positive wire to when engine on corrent flow and when engine off corrent off, Pin 85= ground, Pin 87A= DRL positive, Pin 86= Headlight positive, Pin 87= ?????, Reply me please. Thanks Brother

@eazidiy Жыл бұрын

No connection on Pin 87.

@swmkhwrgoyary3642 Жыл бұрын

Thanks brother ❤❤❤

@eazidiy Жыл бұрын

You are welcome! I hope the connection worked for you?

@djlakota8907 6 ай бұрын

I just contacted everyone yesterday, all works perfectly till you start the car up, indicator signal won't work, why is this please?

@AmiNunezGarver 5 ай бұрын

Hi, nice video, can you tell me please why my Drl strips automatically turn off when I start the engine? With the engine is off all works good

@eazidiy 5 ай бұрын

Is that after you did the connections with a relay?

@AmiNunezGarver 5 ай бұрын

@@eazidiy Hi thanks for your reply. No no relé connected. Now after several attempts, the daylights works properly, but the turning lights when the engine is on doesn't work. I don't know what I'm doing wrong🤦‍♂️

@eazidiy 5 ай бұрын

@@AmiNunezGarver Issue could be you are not properly terminating the wires. If you use a cable tap, the connector may not be touching the metal part inside of the wire. Do a direct wire connections.

@AmiNunezGarver 5 ай бұрын

@@eazidiy directly to the battery?

@eazidiy 5 ай бұрын

No, I mean do direct wire to wire connection if you used cable taps.