Here is easy to follow instructions on multicolor LED light for your motorcycle...Hope it will help you to do your own work and save some $$$
Пікірлер: 42
@zacksrandomprojects9698 Жыл бұрын
Hey great video. Im about to install the kit I bought for my Harley and this helped
@teo_d_david6 ай бұрын
Thinking about doing it. Thanks for the video.
@michaelsanchez7933 жыл бұрын
Good info! Thank you. I got a similar package and wasn't sure where to start.
@noethewolf47523 жыл бұрын
The white wire you install on brake it was on the positive on negative wire?
@baloo2172 жыл бұрын
Nice work man!! Do you have a link gor those lights?
@everettware346612 күн бұрын
I bought a bike with them already installed and I’m looking for how to put them to the battery. I might have to take it back to the dealer cause they unhooked the lights. I don’t see the battery hook ups hanging anywhere
@Shootemfulloholes2 жыл бұрын
Thank you for doing this it helped a ton!!
@carlitosway696913 ай бұрын
Good job!!
@williamunderhill427 Жыл бұрын
Thanks so much!!!
@jennelnavallasca91755 жыл бұрын
the connection of wires are series sir?
@IAMTHE1_2 жыл бұрын
How to turn it off and on ?
@Sthanyer3 ай бұрын
Is it good if i plug directly to the bayery ?
@02rjmartinez Жыл бұрын
Is the adhesive on the lightstrips enough, or does he have to use zip ties and store-bought double sided tape
@mikeruark17278 ай бұрын
Thanks brother
@futurenow5223 жыл бұрын
Great info video!!!
@beaugarrett67513 жыл бұрын
pro trick : watch movies on instaflixxer. I've been using them for watching a lot of movies recently.
@jaxonheath30383 жыл бұрын
@Beau Garrett Definitely, I've been watching on InstaFlixxer for months myself :D
@trentmiles56163 жыл бұрын
@Beau Garrett yup, been using instaflixxer for since november myself :)
@pedroemmett35093 жыл бұрын
@Beau Garrett yea, I've been watching on instaflixxer for months myself :)
@jaimerichard36813 жыл бұрын
@Beau Garrett definitely, have been using instaflixxer for since december myself :D
@aaronchacon28563 жыл бұрын
Just bought my set. Do I have to buy connectors or can I peel the wire a little more and just have the wires touch the battery?
@DoityourselfMotorcyclerepairs3 жыл бұрын
It's always better to use the connectors...you can buy them in any hardware store or auto parts store...but as a temporary solution you can do what you was saying. It is however more likely to create bad connection or shorting out of wiring . Thanks for watching the video and please subscribe...it will help me out
@aaronchacon28563 жыл бұрын
@@DoityourselfMotorcyclerepairs does that mean that it could kill my battery life?
@aaronchacon28563 жыл бұрын
I have a 2017 Honda Rebel 300. When I tried to add the connectors, it shortened the screw so it wasn't long enough to screw both the battery and lights. You recommend a longer screw or a different connector?
@DoityourselfMotorcyclerepairs3 жыл бұрын
@@aaronchacon2856 you can put small piece of cardboard under the nut in the battery to keep it close to the top of the contract
@noethewolf47523 жыл бұрын
I was worried about the white wire so is not necessary have the white wire connect?
@michaelfrascati76103 жыл бұрын
No...Optional
@pakarucustoms1228 Жыл бұрын
What's app to control lights on phone
@ferminpiii60162 жыл бұрын
Maybe improve the lighting and a close up of how the connection to brake light goes. Thank you.
@CIarkNova4 жыл бұрын
Wondering if anyone else had this issue: I accidentally cut a wire for a strip with my tire while riding. It shorted the fuse, so the module should be fine. HOWEVER, they don’t turn off anymore; they turn on and work fine, but whenever they’re ‘off’ they turn red, even in cycle/fade mode. It’s everything connected to that module that does it, not the strip (like I’ve read) Even wirh a new strip. ?!
@searsvillep4 жыл бұрын
So do u have to install the white wire
@michaelfrascati76103 жыл бұрын
No. Optional
@davidbriseno28884 жыл бұрын
It didn't help it was to dark I was really hoping to put my lights rn
@danschultz1615 Жыл бұрын
You should have added some lights to the front of the body before the forks
@kriskoppy27532 жыл бұрын
Can’t see a thing since there’s no light…..
@timworkman20174 жыл бұрын
My lights stay stuck on red and the remote does nothing
@DoityourselfMotorcyclerepairs4 жыл бұрын
I believe your little control box is bad...these Chinese light kits are nice and cheap while they are working but unfortunately like everything else from China they are a JUNK. I installed few of them for my customers because they purchased them on ebay and asked me to do it but looks like they don't last ... sorry brother. I hope you will find some other useful videos on my channel and please subscribe to help me out
@timworkman20174 жыл бұрын
I used a safety pen to reset it
@DoityourselfMotorcyclerepairs4 жыл бұрын
@@genxloner I don't think it will be any different than the video you just seen here.... they are all pretty much straight forward installations. Thank you for subscribing 😊
@caryfelton3660 Жыл бұрын
@@timworkman2017where do you find the reset to use the safety pin? My kit literally does the same... "off" simply turns on a red light. Ive even pulled fuse and left tge system off for days and it still does this.
@Farrisg287Ай бұрын
He doesn't show anything up close what happened to step by step you really don't see much