How to Install LightBurn for Galvo, Drivers and Device Setup
Рет қаралды 43,350
Күн бұрынWe'll cover installing LightBurn for GAVLO (yes I see the typo), its drivers and initial device setup!
The channel, staff, communities, web services... everything. It's all here thanks to the LMA.
► Consider Supporting Us: masters.lasereverything.net/
❤️ We're probably earning money when you buy stuff we link. ❤️
✨As Amazon Associates we earn from qualifying purchases.✨
You're going to love this content too!
► FULL LightBurn for Galvo Playlist: • LightBurn for Galvo Cr...
► NEW MakerREMIX Channel! @MakerREMIX
► Laser Everything Linktree: linktr.ee/lasereverything
► Laser Source Linktree: linktr.ee/lasersource
We have SO MANY Laser Resources:
► The 2024 Buying Guide: makearmy.io/scripts/buyinggui...
► Join the FREE MakerArmy Network: makearmy.io/
► Join the FREE Matrix Server: rb.gy/m4ca1j
► Join the FREE Discord Server: / discord
► Join the FREE Facebook Group: / lasereverything
► FREE Laser Engraving Starter Settings Packs: lasereverything.net/free-lase...
► Community Fiber Library: db.lasereverything.net/script...
► Community CO2 Library: db.lasereverything.net/script...
► Community UV Library: db.lasereverything.net/script...
► Laser Source Podcast: podcast.lasereverything.net/
0:00 - Intro
0:31 - Downloading Lightburn for Galvo
2:00 - Installing LightBurn for Galvo
2:30 - Installing LightBurn Ezcad Drivers
3:24 - Activate LightBurn for Galvo
4:15 - Adding Your First Galvo Laser
8:33 - Device Setup
9:38 - Outro - Supporting the Channel
Listen up! Laser engraving machines are inherently dangerous. The content this channel is for educational purposes only. Laser Everything LLC can not be held liable for any harm caused to any individual or personal property related to settings, activities, procedures, techniques, or practices described in whole or part on this KZfaq channel. By watching this video you agree that you alone are solely responsible for your own safety and property as it pertains to this content. Do your own research before purchasing machines, materials or accessories. LE is viewer supported and probably earns commission when you buy stuff we link.
@pablopeu 2 жыл бұрын
Gavlo 😀
@LaserEverything 2 жыл бұрын
DAMN! lol missed that one.
@hammeredgem.j.c.9030 Жыл бұрын
🙂😊
@Kmorlandhy16 8 ай бұрын
Thank you so much for this video. I just bought a brand new co2 machine and I've spent countless days and hours trying/stressing about installing the right drivers, the ruida control panel and getting lightburn to FINALLY home to the top left of my machine. Hopefully my laser will now communicate properly and I can start smashing into cutting and engraving products. Cheers mate
@schmid64 2 жыл бұрын
This is sooooo exciting! Ty Alex and everyone for working so hard to get us going in LB!
@LaserEverything 2 жыл бұрын
You're most welcome, thanks for coming along for the ride!
@braydenreed7080 12 күн бұрын
super helpful for a first time laser user! Thanks so much!
@LaserEverything 11 күн бұрын
Our pleasure!
@nathan24277 Жыл бұрын
love the helpful videos Alex. Thank you.
@LaserEverything Жыл бұрын
Thanks for watching Nathan 🙂
@BigHWorks Жыл бұрын
Excellent - Thanks for this very detailed tutorial. Saved me a lot of effort I am sure.
@LaserEverything Жыл бұрын
You're welcome!
@shaunwallis1501 2 жыл бұрын
Bloody good work thanks
@LaserEverything 2 жыл бұрын
Thanks for watching!
@DS-ng2kj 2 жыл бұрын
THANK YOU!! 🙏🏼
@LaserEverything 2 жыл бұрын
You got it!
@krisknowlton5935 2 жыл бұрын
I'll bet Oz is glad you are doing these videos so he doesn't have to. And I'm glad you're doing these videos so my learning curve will be cut way down.
@LaserEverything 2 жыл бұрын
Perhaps lol Oz likes things done a very specific way and knows the software better than me haha he may be bashing his head into a wall somewhere!
@krisknowlton5935 2 жыл бұрын
@@LaserEverything naaa, you have have this. Sometimes the best teachers are the people who had to struggle a little bit to learn it themselves.
@LaserEverything 2 жыл бұрын
Appreciate your optimism lol 😆 fingers crossed!
@lightburnsoftware7598 2 жыл бұрын
We'll be doing our own videos as well, but Alex and crew are certainly helping us out by doing these.
@krisknowlton5935 2 жыл бұрын
@@lightburnsoftware7598 I have to say he is really good at making these videos. I will be downloading a copy on the 30th. I'm going to buy it for sure. It is good to know you guys are watching Alex's videos too. I kinda figure you will let him know if he is going down the wrong path. Thanks for all you guys do. You are making my retirement a fun time of life.
@esurfrider7687 Жыл бұрын
Hey LaserEverything! I’m interested in picking up a galvo fiber laser to use with lightburn, is the setup more or less the same for Mac users? And which fiber lasers are compatible with lightburn that I should be looking at? Thanks!
@pvd354 6 ай бұрын
I should've come straight to this video and saved me hours of my life🤦🏿♂️
@LaserEverything 5 ай бұрын
We're glad you're here now :)
@TheHelicapt Жыл бұрын
So I have Ezcad 2 running and working fine on my 60 watt Mopa fiber and when I connected lightburn, I’m just not getting the same buzzing sound, I get more of a hissing sound with lightburn. I just dont feel Lightburn is as poweful as when i use ezcad 2… I believe all the settings are the same as Ezcad as well…why would this be?
@heidielliott5176 2 ай бұрын
Hi, Thank you for having this channel! I have so many questions.... I've been using lightburn with a co2 laser for 3 years, but am adding a fiber (galvo) to our shop.... does this video help me get to where I will need to be if I already have lightburn installed. ( I have both licenses for both lasers)
@LaserEverything 2 ай бұрын
Absolutely! This video helps with drivers so LightBurn can see the laser, and the playlist as a whole will be a great resource for the remainder of setup and resolving a lot of common troubleshooting points of getting things going when starting out with a new platform.
@mkryann1587 8 ай бұрын
Hi there vary excited for your content, i recently got my 30w Monport Fiber laser, after using it for few days with Ezcad/Lightburn the power cut out mid engraving and there is no power from the laser head from that point on, i had many tries to figure it out looks like alot of people have this issue when the red beam traces the image but no emgraveing happens, no burn or laser effect on the material, i contacted the seller and i was told it is an driver issue, i had to uninstall and reinstall with their provided drivers but same thing happened, would gladly appreciate any help thank you
@trem1980 3 ай бұрын
I'm proper confused when it gets to the folder configuring ezcad2. I'm not getting the option in device manager when searching for changes to software
@bradouellette6558 2 жыл бұрын
Is there any initial install videos you can recommend for Mac OS users , currently using LB on a CO2 laser , will this be linked with it our completely stand alone , should be receiving my Galvo this week sometime
@LaserEverything 2 жыл бұрын
Check out Lightburn's KZfaq channel, I think they may have one.
@Todd-W Жыл бұрын
love it thank you! what UV lens' do you recommend I get? I have the 160 (110) and 290 (200).. anything else?
@LaserEverything Жыл бұрын
The 110 work area is fantastic, and one in the 175-200 work area is a good mid size range (probably about the max I'd go for things like glass), and probably the biggest I'd recommend for a 5w UV in most use cases.
@user-pp5nq3sd8w 2 жыл бұрын
What about multipoint callibration of galvo area? Lightburn uses internal calibration software or i need use external programs?
@LaserEverything 2 жыл бұрын
LightBurn does not currently have a native solution for this. Still have to do corfile and it can be imported. We're covering it in a future episode this week.
@richarddaka4023 Жыл бұрын
Hey Alex, I got a galvo laser mopa 30w, I've managed to install lightburn and the drivers, the laser is connected but it's been identified as a UV, it's even framing but it's not engraving, the light just dances around like it is engraving but nothing. Any ideas??
@jackterharutyunian8862 10 ай бұрын
Were you able to find out what the cause was? I'm having the same issue
@RCREVIEWS101 2 жыл бұрын
So, do I need uninstall Ezcad2 and it's driver's and them install LightBurn? or can I live Ezcad2 and run both from the same PC?
@LaserEverything 2 жыл бұрын
You can leave the ezcad drivers and install lightburn's drivers over them. We talk about how to swap back and forth quickly in episode 3.
@nickbez67 Жыл бұрын
Hello, lightburn can’t find my laser, I have a new 30W Raycus Fiber Laser I did also select the box for EZCAD2 galvos, but then it says “BJJCZ USBDevice Install failed” I have installed Ezcad and it works fine, I am using windows10 but I would like to buy Lightburn so I downloaded the 30 day trial I would appreciate any help thanks
@LaserEverything Жыл бұрын
Check out this video here: kzfaq.info/get/bejne/oq1_bKykr8iyYWg.html I think it will get you pointed in the right direction.
@chadwickduhon5042 Жыл бұрын
Will it find drivers for rebranded EzCad Programs? The laser i have uses a company supplied and rebranded version.
@LaserEverything Жыл бұрын
Depends on which rebrand. Many just use the stock ezcad drivers - others have proprietary integrations and drivers. You can always check the downloads section at www.lasereverything.net/ which is where we archive all of the software and auxiliary files we collect.
@polakis1975 2 жыл бұрын
For me that i use already lightburn for co2 what happens? I will have to reinstall lb?
@LaserEverything 2 жыл бұрын
Yeah during the beta period you'll just install the new version over the old one - shouldn't have to do anything else until the 15th when you'll have to buy the galvo license upgrade.
@Walitaeg6 Жыл бұрын
can i install lightburn on a new pc that never had ezcad2 installed and occupy it with the fiber machine?
@LaserEverything Жыл бұрын
Yep!
@christophermiller4045 5 ай бұрын
So when do what you say mine does not go to ready it just says disconnected
@iammichaelwalker 2 жыл бұрын
Are you going to cover the mac version ? because even though my Config File was there it says Error putting it in??
@LaserEverything 2 жыл бұрын
I don't currently own one but perhaps should pick one up for things like this. I'll see what I can do.
@paulmay6765 2 жыл бұрын
Hi Alex, LMA member here. I'm running LB on a mac. I already have a ruida co2 connected but now looking to add a Galvo. When trying to detect for the machine it finds nothing, any ideas? BTW I have the galvo license.
@LaserEverything Жыл бұрын
Thank you for your support! Make sure the machine is on, plugged in, if you're using any extenders or hubs remove them. If none of that works, contact Lightburn support so they can validate the status of your license.
@hammeredgem.j.c.9030 Жыл бұрын
So I am ready to install the M7 I have. Can I configure Light Burn to run my boss co and then switch over to the M7? I just updated LB but haven't installed the ezcad drivers. Can I import the drivers without removing LB all over again?
@LaserEverything Жыл бұрын
Hey Hammeredge, you can indeed. You can even open 2 instances of LightBurn with 1 set to device for co2, and the other set to fiber. Then you can control them independently even at the same time. A bit further into the crash course (episode 3) we cover swapping between ezcad and lightburn, you won't need to remove LB. :)
@samo5260 2 жыл бұрын
HELP! ... Pls. Lightburn wont open file "markcfg7" as shown at 7.52 of this vid. "Lightburn doesn't recognise the extension" is the message I get when I try, right click and open with. Can someone assist please?
@LaserEverything 2 жыл бұрын
For tech support please join the Discord Server or Facebook Group, links are in the description :)
@shmulik152 Жыл бұрын
Tried installing a 30w fiber laser from a Chinese company called Highspeed laser. I can see the driver in the device manager (lightburn installs a newer version than the one in your video) but my laser is not recognized.
@joewebb542 Жыл бұрын
Same problem with a new EM-Smart laser - when I install the lightburn driver, EZCad stops recognizing the laser and lightburn won't recognize it without the updated driver. But then the lightburn one doesn't show a red framing light but it recognizes it.
@LaserEverything Жыл бұрын
I'm not sure what controllers Highspeed laser uses in their systems. Make sure you have a genuine Ezcad 2 controller or Cyclone clone board. Seacad controllers and ezcad 3 controllers are not supported.
@LaserEverything Жыл бұрын
You can fix the red light issue by heading into your F3 Param > Ports menu on ezcad. Note the red light port. Make sure it matches in LightBurn. Often a mismatch here is the cause of this issue.
@joaoalmeida6222 2 жыл бұрын
Good afternoon, can we install two software, one for CO2 and one for LASER FIBER, on the same IOS? Or do I have to have two IOS? thanksos
@LaserEverything 2 жыл бұрын
We cover this in Episode 16 :)
@hairypussy9124 2 жыл бұрын
my laser is not recognized by lightburn, I have BJJCZ V4 board and use ezcad2. drivers are installed without problems but when I click find device lightburn does not find anything
@LaserEverything 2 жыл бұрын
Until some of the initial bugs post-release get sorted out I would post all technical issues like drivers to their support team here as they'll be best suited to root out issues like this: forum.lightburnsoftware.com/
@kristiansalinas2516 2 жыл бұрын
I am in the same situation, lightburn does not recognize my laser fiber. What can I do to be able to use lightburn?
@peteralberts01 2 жыл бұрын
do I have to uninstall Lightburn when I have it already for my Co2?
@LaserEverything 2 жыл бұрын
You do not but you will have to update to the latest version to try the beta and you certainly will have to purchase a galvo license on the 15th.
@yustushamidi9333 2 жыл бұрын
I followed exactly this guide and my laser was also found by Lightburn. Now to my problem: as soon as I want to start engraving something and go to start, nothing happens. The laser will not start. does anyone have any tips for me?
@LaserEverything 2 жыл бұрын
Check your ports in the Device settings (we cover this later on in the series) and make sure they match what you have in ezcad, particularly the start marking IO
@larryhinton7765 2 жыл бұрын
I can t find the usblmv file . remove lightburn and started over but it's not in divice manager
@LaserEverything Жыл бұрын
Are you sure you're on an Ezcad 2 controller? Ezcad 3 boards show up with a different name and aren't currently supported. Make sure you're checking not just devices with out drivers but also in the USB devices categories in device manager as sometimes it can be hidden in there.
@evanmartin883 2 жыл бұрын
So how will I swap between my co2 and fiber?
@lightburnsoftware7598 2 жыл бұрын
They are just different devices in LightBurn. You choose the other device, and connect to the correct USB port.
@willyburnette3470 2 жыл бұрын
So I have license for my CO2 50watt laser. Can I upload new update and install software for my 30watt fiber Galvo with EZCAD 2 ? Or do I need to buy another license to run Fiber Laser in LightBurn? Thank you in advance
@LaserEverything 2 жыл бұрын
You'll have to buy the Lightburn for Galvo license as an add on to your current license.
@willyburnette3470 2 жыл бұрын
Thank you Sir
@user-rz6io5sp2m 10 ай бұрын
Hi! I imported all my Ezcad2 settings to lightburn. looked over all the settings and it looks good. only problem now is the scale. In Ezcad2 20x20 box is 20mmx20mm , the settings in lightburn for galvo1 and 2 with offsett etc is identical, but in lightburn 20x20 comes out as 18.5x18.5.
@user-rz6io5sp2m 10 ай бұрын
never mind, solved it :D
@stanislawreymer77 2 жыл бұрын
We installed lightburn but could not see the option 'Install EzCad2 driver (used by galvos)'. So we could not check this box. Why is this? Is this a problem?
@bearingtonbear3162 2 жыл бұрын
came to ask the same, been waiting for today
@LaserEverything 2 жыл бұрын
Probably not version 1.2, try to download again - it's been out for a few hours now.
@LaserEverything 2 жыл бұрын
See above
@isaiahphillips1341 9 ай бұрын
I have a problem, yesterday i had it downloaded and working minus circles where not round but i was playing around with the software and the whole panel on the right disappeared along with the top section of tools on the left bar. Basically nothing is working now. And I’ve tried to redownload but no progress. Can you help?
@LaserEverything 9 ай бұрын
At the top of lightburn, go to window, and select "reset to default layout", and that will return the UI to out of the box views.
@erickhernandez1661 2 жыл бұрын
Lightburn isn't recognizing my laser. I have "BJJCZ Device" showing in my device manager as described at 5:27 in the video and no universal serial bus device. I tried to correct this several times by reloading Lightburn to try and get the drivers to load properly, but no luck. Any suggestions?
@LaserEverything 2 жыл бұрын
I'd reach out to lightburn directly via their support forum about issues like this as it may be a bit technical and they'll be better suited to help you get it resolved. They have an amazing support forum. Here's a link: forum.lightburnsoftware.com/
@zachariahvercruyssen5305 2 жыл бұрын
Hi Erick! Same issue here. Have you found any resolution yet?
@SaltyKracker3448 2 жыл бұрын
@@zachariahvercruyssen5305 Any info on this issue yet
@tomw5435 Жыл бұрын
I'm having the same problem I cannot get light burn to recognize my laser. I've jumped through all the Hoops with the downloads Etc and it just will not work. I've got messages off to lightburn and to xtool hoping that I can get a solution to the problem
@SaltyKracker3448 Жыл бұрын
@@tomw5435 Have you tried to turn off the laser and removing the bbjc device in the device manager than installing
@user-rs9eb3dd9w 5 ай бұрын
ali onde diz o driver em 7:31 ele só vai aparecer com a maquina conectada ou esse driver tem que baixar separado e instalada na galvo? Eu sou do Brasil e comprei a Raycus 50w da China e no KZfaq não tem muita informação sobre instalar a galvo no lightburn em Portugues do Brasil
@LaserEverything 5 ай бұрын
Using lightburn, on the last page of lightburn installation is a checkmark to install the lightburn driver for galvo laser. The laser does not need to be on when using that method :)
@victorbrown3032 2 жыл бұрын
Is ezcad required to be installed prior or is LightBurn standalone capable?
@LaserEverything 2 жыл бұрын
Capable on it's own but you won't be able to do some things like build a correction file (we're getting into that shortly in the course) and import factory defaults from your manufacturer.
@victorbrown3032 2 жыл бұрын
@@LaserEverything So, ezcad is basically still a necessity…
@victorbrown3032 2 жыл бұрын
My ezcad2 has always been lacking. Many file types aren’t recognized. Several “laser” controls (project mark) are not listed! And I think I saw “evaluation version” somewhere associated with the software. Making for a less than desirable situation. Not to mention getting my old laptop to recognize and run ezcad or the laser a royal pain. I’ve upgraded to a new computer and have to do it all again! 😩
@Rhinoonfire466 2 жыл бұрын
Anyone have an issue with "Find my laser", my laser is active on the computer but shows in device manager under its own drop down tab labeled "BJJCZ Device" rather then being included in the "universal serial bus controllers" drop down tab. Assuming this is the reason lightburn is unable to find the laser for communication?
@LaserEverything 2 жыл бұрын
For tech support please join the Discord Server or Facebook Group, links are in the description :)
@SaltyKracker3448 2 жыл бұрын
@@LaserEverything The zadig driver swap fixed mine doing this
@nwctsportshooting7321 2 жыл бұрын
I'm following the steps in this video and everything was going smoothly! Lightburn found my laser but I'm getting a "You have selected a galvo device but do not have the galvo license" message with the only option being to "upgrade your license key". All other options are greyed out. Selecting the upgrade button just kicks me back to the "Find Your Laser" page. This is a fresh download of version 1.2.00 from today (7/1/22) at around 8:45am. Suggestions??
@LaserEverything 2 жыл бұрын
I'd reach out to lightburn directly via their support forum about issues like this. Seems non-standard. Here's a link: forum.lightburnsoftware.com/
@nwctsportshooting7321 2 жыл бұрын
@@LaserEverything Thanks, I already did but I also know you are probably the most responsive laser person on earth so I figured I'd post here too. :-) At least if anyone else has the same problem they won't feel alone. LOL
@LibaciFibs 2 жыл бұрын
@@nwctsportshooting7321 I had the same problem about 5 minutes ago. Shut Lightburn down, and thought I'd try it again and it wasn't greyed out when I reopened and proceeded to add device.
@nwctsportshooting7321 2 жыл бұрын
@@LibaciFibs That did it! Thank you for posting.
@sure1681 Жыл бұрын
@@LibaciFibs it doesnt work for me
@robertochaves4535 2 жыл бұрын
Is there anything different to consider for us who aim to run it on a Mac?
@LaserEverything 2 жыл бұрын
Nope, more or less the same thing. Just a little more leg work to get those intial device settings since you won't be running a copy of ezcad from the factory to copy from.
@robertochaves4535 2 жыл бұрын
If you copy the factory settings file from the Windows computer to the Mac isn’t it able to import the file on the Mac version?
@autonotely 5 ай бұрын
when I press Find my laser it does not searching anything, just blank page..Can someone help me with this. Thanks
@tatendanyoni1311 2 ай бұрын
Did you get help with this? I’m also facing the same challenge
@joejohnsen6073 2 жыл бұрын
My uv will be arriving in about a month. I remember you mentioning that lightburn currently doesn't support UV. My uv will have ezcad 2 board. Will this make it possible to use lightburn?
@lightburnsoftware7598 2 жыл бұрын
We still have to add that specific type of laser to LightBurn. I haven't looked yet to see if it uses different settings or commands than fiber, but we will be investigating soon. For now, it's just fiber and CO2 laser sources, but we're hoping to get UV added before long.
@joejohnsen6073 2 жыл бұрын
@@lightburnsoftware7598 thank you!
@terrysol1 2 жыл бұрын
@@lightburnsoftware7598 Everything I've seen until now indicated ezcad2 boards would be supported today including UV. I was excited to get my UV going today and fortunately I read this comment before I went down the path. Hopefully it's clear on your download page that UV is not supported yet, otherwise you'll likely get a lot of confused customers. Looking fwd to UV support soon hopefully.
@lightburnsoftware7189 2 жыл бұрын
@@terrysol1 It says on the fiber release announcement and in the documentation that UV is not currently supported. It is on our list to add shortly, but we don't have a machine with a UV source here that we can do captures with, so it's a little more cumbersome.
@norcalfirearmsupply Жыл бұрын
How do you add device? The window doesn't automatically pop up
@LaserEverything Жыл бұрын
If the window isn't popping up automatically for you, you can click "Devices" in the lower right hand corner to get the menu to pop up manually.
@tomw5435 Жыл бұрын
I have totally given up on light burn. I've spent hours trying to get it to install. No luck...
@LaserEverything Жыл бұрын
Oh no, have you posted about it in the Discord server/Facebook group yet? Emailed lightburn? support@lightburnsoftware.com Links to all our support communities are in the description.
@Goneaway-4-gud 10 ай бұрын
Anybody using iMac OS and LB …can you advise how to inout the corfile2 please. I jave tried import, no show usung open :(
@tonyb9785 Жыл бұрын
In case anyone else runs into this. I had an error when loading my markcfg7. It said that the correction file (.cor) was not in some default file path (C:\Users\Administrator\Desktop\EM\1924536SN20200723M101C.cor). So I created that file path on my computer took the .cor file that came on the usb stick with my laser and renamed it and put it in that location. This resolved the error. I haven't gone any further, so I can't confirm that it works for the following steps.
@raulruiz1818 Жыл бұрын
after I did everything on this video i was no longer able to use ezcad2???
@LaserEverything Жыл бұрын
Yes, LightBurn and Ezcad cannot run side by side as they use different drivers. A few episodes later in the series we talk about how to switch back and forth.
@raulruiz1818 Жыл бұрын
Thanks I’m on it 🫡
@LaserEverything Жыл бұрын
Good luck, have fun!
@user-lv2hs9rf2k Жыл бұрын
Regardless what I do its not showing my Fiber laser as connected
@LaserEverything Жыл бұрын
Sorry to hear that! If you're still experiencing troubles and the video guide hasn't helped, there may be something else going on. If you haven't, join one of the communities we list in the description and make a forum post, and the team and community can help troubleshoot further.
@jbug332 2 жыл бұрын
I can’t find marconfig7. Suggestions?
@LaserEverything 2 жыл бұрын
screenshot your F3 Param pages and use it to fill out your device settings manually
@PeterWheeldon 2 жыл бұрын
Can I copy over my EzCad work parameter library or will I be able to export-import the file? ie. EzCad>PARAM>MarkParam.lib (assuming that's the correct file and location)
@LaserEverything 2 жыл бұрын
Check our recent uploads, we did a video about a converter just before the tutorial series started :)
@PeterWheeldon 2 жыл бұрын
@@LaserEverything Thanks. I watched them but must have missed that.
@LaserEverything 2 жыл бұрын
Idk if we explicitly state lightburn conversion but it's definitely supported
@user-rs9eb3dd9w 5 ай бұрын
markconfig7 tem no ezcad ou tem que baixar a parte?
@LaserEverything 5 ай бұрын
Markconfig7 is inside the ezcad folder, it should be within the folder of ezcad2 if you have the program already. If you do not have a copy of ezcad2 that came with your laser, you can generate the device manually instead of importing it.
@harishhariharan218 10 ай бұрын
How to get license key in
@MrRdjhebs 2 жыл бұрын
What happens to my lightburn library?
@LaserEverything 2 жыл бұрын
The answer should be "nothing" should be able to install right over your current installation. If you're nervous though go to the library tab and click Save and save a backup to your desktop which you can stash somewhere safe.
@prcdslnc13 2 жыл бұрын
Libraries are now linked to devices. So you can make a new library for your galvo machine and when you switch to the galvo machine it will load up your galvo library.
@kaylascapanski5155 2 жыл бұрын
I already have LB on my Mac and just received my fiber laser. I bought the Galvo upgrade. How do I select the EZCAD driver ( I have the usb plugged in that came with the laser) when I already have LB installed? Do I need to uninstall LB?
@LaserEverything 2 жыл бұрын
For tech support please join the Discord Server or Facebook Group, links are in the description :)
@kaylascapanski5155 2 жыл бұрын
@@LaserEverything I did last night! I’m all set!! Thank you!
@butterflyj685 Жыл бұрын
🙂
@LaserEverything Жыл бұрын
🙂
The Louisiana Hobby Guy
Рет қаралды 12 М.
Rj Mobile 01
Рет қаралды 15 МЛН
Павел Хмурчик
Рет қаралды 858 М.