Рет қаралды 18,195
Check out my website: www.RykerRydes.com
for Can-Am Ryker and Spyder parts and accessories!
Step by step instructions for both 600 and 900 Rykers. Chapters/time stamps below:
00:00 Welcome to Ryker Rydes
01:28 Why swap spark plugs and how often do you need to change them
03:14 Make sure your bike is cold (not ridden)
04:04 Why choose Iridium spark plugs
05:06 Link to removing glove box video
05:58 600 vs 900/Rally spark plug removal...What's the difference
06:23 Disconnecting the coil pack and torx (T-30)
08:22 Link to Bill Ramseyer's clam shell video (how to open up the bike)
11:49 Removing the coil pack
13:43 Removing the old spark plug
16:00 Gapping the spark plugs (let me know if you'd like a separate video on this)
16:50 Applying the dielectric grease and thermal paste
18:12 Putting the new spark plug in
20:57 Addressing "THE" 3rd plug (shorter extension needed to fit in the tight area)
24:31 How do you know it you installed the new spark plugs correctly
**A few subs have commented that, with the right SMALL ratchet, you do NOT have to take the whole bike apart. You can just grab it through the area under the glove box. Try it and leave a comment and let everyone know if it can be done!**
TOOLS NEEDED:
SPARK PLUGS (of course):
commerce/pro...
Torx T-30
TRIM REMOVAL TOOL:
amzn.to/47AvWAH
5/8" SPARK PLUG SPECIFIC SOCKET:
amzn.to/4b8aDtw
MY VIDEO ON HOW TO REMOVE THE GLOVE BOX:
• Can Am Ryker Glove Box...
BILL RAMSEYER'S VIDEO ON HOW TO OPEN THE BIKE:
• Can-Am Ryker how to op...