How To Install Nitrous (NOS) on Motorcycle 2020 Kawasaki Ninja 400
Рет қаралды 7,927
3 жыл бұрынCompressed gases and oxidizers are dangerous, handle at your own risk. Motorcycles are inherently dangerous, ride at your own risk. I am not sponsored by anyone, but here are the parts I used-
Nitrous Kit: www.dynotunenitrous.com/store/scripts/prodView.asp?idproduct=141
Kill Switch: amzn.to/3t8giZ9
Nitrous Switch: amzn.to/2Rfrh61
Drill Bits: amzn.to/3u48xoq
Teflon Tape: amzn.to/2QCYics
10LB tank: amzn.to/3gSKLrN
Hose for 10LB tank: amzn.to/2PCnY8m
10LB tank adapter: amzn.to/2SgQihE
Front and Rear Stands: amzn.to/3tPXCP3
Swing Arm Spools: amzn.to/32MNafa
Channel Locks: amzn.to/3tb3IZ8
Drill: amzn.to/3fKDEke
Hex Wrench Set: amzn.to/3eIUNJd
@StrungOut4 2 жыл бұрын
Someone get this man some wrenches and socket set
@TheCorporateRat 3 жыл бұрын
Update: I had swap out the smaller jet for the next higher size because it got blocked. Other than that works great! Still getting the hang of it, kind of scary to use !
@jamesalexander3547 Жыл бұрын
Just get a bigger bike.
@natedawgg8138 3 жыл бұрын
Ride update??? I've always wanted to see this. PLEASE!!
@peterk6908 3 жыл бұрын
So I'm guessing epic fail. Can you update?
@jessefpv9217 Жыл бұрын
Someone let Him know his Tank Guard is on Wrong. Lol
@MadStylee619 2 жыл бұрын
Nos on a 400 huh? Pointless I think. Fun factor and cool factor through the roof.
@donay3773 2 жыл бұрын
right off the bat 28 hmmm I put a 22 shot in my Hayabusa and still was scared I kinda don't believe this why hasn't a video been post ?
@tl4life59 2 жыл бұрын
absolute wiring nightmare............curious to see how this works tho
@jetskechers5354
I feel like bro was trolling us with how slow he ran that drill on the airbox 😂😂
@jetskechers5354
Love the cyberpunk sticker! Man of culture
@kennethpowers8995 3 жыл бұрын
I also put a dry kit on a 2020 400. Bike has a full Akra exhaust/filter/Norton Stacks/no emissions equipment/stock gearing. Tuned on FT the bike went a best of 13.30s in that trim on stock Dunlop’s at a 311ft DA. 93 octane. With the smallest jet in a CFN dry kit, I pulled 4* timing from my NA and tune and ran 12.84. Now I have the next size up jets in the kit, i retuned on VP MR12 with not as fat of an AFR as my pump gas tune was( 12.5-12.7:1 now on the VP fuel compared to 11.4-11.6:1 on pump 93), put 1* of timing back in it up above 7500 RPM, went to a heat range 8 plug down from
@jacquesakamajestic 2 жыл бұрын
Very cool man. Nice. Where is the video showing you riding it with the nos? I also have that same bike same year and everything! Love it
@Vagorim 3 жыл бұрын
Please do a video of you driving the bike using the nos!!
@chaze1385 2 жыл бұрын
You don't need braided line that big. -3 is more than enough. PTFE line works just as well. Which is what is inside the braided line. Can handle 1000+psi no problem. Don't route close to hot exhaust. Also mount your jet in the solonoid outlet not at the nozzle. Look at Wizards of nitrous for example.
@chaze1385 2 жыл бұрын
Also wire the nitrous to spray on a throttle switch. Master switch to arm and microswitch for wide open throttle. Horn button or any button to spray is silly
@Shakinthumbs Жыл бұрын
Update please? Would love to see this used during an endurance ride.
@chalkdemon8019 2 жыл бұрын
I have a question, how did that little parallel twin hold up to a shot of nitrous?
@Theoneguythatdoes 3 жыл бұрын
Post some more videos/updates
@yaelvillagomez2713
i found his videos and thought i was having a fever dream. what in the actual fuck is all of this. Tapping threads with bolts, tank guard on as grips, what looks like a masonry bit to drill into plastic, disconnecting battery with an electric drill, wires all over the Wazzoo…and now Nos on his ninja 400 with a pressurized tank just dangling on the side. im just upset with what i see. i really hope the bike is in a junk yard where it belongs and that this man never touches a tool or motor vehicle again.. oh and the video isnt even half way over
Sportbike Track Gear
Рет қаралды 32 М.