Thanks for the tip about removing the outer pad. I was struggling!
@notch5274 Жыл бұрын
I really appreciate this vid
@mrfaceforest4 жыл бұрын
Man I really appreciate you posting this video! I ordered an SM kit for my KX450, which uses the same bracket, from Warp9. It has the little scan code on the packaging which takes you to their website for install instructions but they don't even list my bike. Stupid. I could've probably messed with it and figured it out but I was honestly over it at the moment, already super irritated with the multiple screw-ups that I had with Warp9. So, long story short, lol, Thank You for doing Warp9's job! You're the bomb dot com my man!
@notch52743 жыл бұрын
Thanks bro was wrecking my brain appreciate you taking time to show us
@marksokolski5125 Жыл бұрын
Much help, thank you! 👍
@williamoakes6642 жыл бұрын
Great mechanicing skills
@nickyyoung19925 жыл бұрын
Were can I buy a 320mm adapter bracket for my 2018 KTM 300 exc tpi mottard.cant find 1 online any where 2 fit my bike.
@christoforosyeralis66203 жыл бұрын
What about the back of the pin that threads into the new bracket that I see in front of the pad. When the pads runs down will that hit the disc I mean the rotor
@Motoxindustries3 жыл бұрын
The caliper slides over that pin. That's what keeps the caliper aligned. It will not hit the rotor.
@aquilameranese4 жыл бұрын
How/where did you re-routed your brake fluid hose & speedometer wire?
@Motoxindustries4 жыл бұрын
We routed the brake line in the stock position. We zip tied the speed cable to the brake line. You can run the line on the outside of the fork if you wanted.
@alvarotortolero46644 жыл бұрын
Hi how are you where I can buy brake bracket adaptor 320mm for ktm lc4 enduro 2008
@Motoxindustries4 жыл бұрын
If you have the 640 warp 9 has them. If you have the 690 we have not found one to fit. Thanks for looking
@hilltop96673 жыл бұрын
Hey what bike are you workin on? Would this work for my drz400sm
@Motoxindustries3 жыл бұрын
No the sm model comes stock with a larger rotor.
@JuanjeteMS3 жыл бұрын
It will work if swapping from 310mm to 320mm. Similar bracket and fork.
@bobbygoat235 жыл бұрын
do you need to bleed your brakes when doing this?
@Motoxindustries5 жыл бұрын
No but you need to pump your brake lever to build pressure back in the caliper.
@desertrider3255 жыл бұрын
Do you sell a 320mm rotor and bracket for my 2012 wr450f?
@Motoxindustries5 жыл бұрын
Yes we do. Here is the link motoxindustries.com/product/320mm-supermoto-adapter-bracket-320bkt/ let me know if you have any questions. Thanks
@marcobatista9995 жыл бұрын
i bought a 320mm adaptor, but the disc scrapes it, did i do anything wrong or is the adapter not good?
@savagestylez4 жыл бұрын
Marco Batista im having this exact problem right now.
@mikepatrick81724 жыл бұрын
Jason Park Hi Jason. I’m actually having this same issue right now as well. Did you figure out where it was scraping or a solution here?
@savagestylez4 жыл бұрын
Mike Patrick hey brother I figured out what was wrong with mine. I had the wheel spacers on the wrong side. The spacer that goes on the rotor side is a little wider
@mikepatrick81724 жыл бұрын
Jason Park Thanks so much for the quick reply man. I’m installing on a 2017 ktm 300 xcw. The spacers looked identical in size to me but I’ll take a second look there. Thanks again for your help here.
@savagestylez4 жыл бұрын
Mike Patrick np bro it looked identical to me too until i put them next to each other lmao
@rashidleathers97663 жыл бұрын
Where can I find that caliper bracket did not receive Bracket