I like the way you do the pocket liners and also like the way you pull the cloth to the side pocket to give you some cloth to work with later. Don't understand the haters. Thanks for the video.

Good clean work - Thanks man for making this! It's not cheap to have cloth put on! But with your help people can now at least have a fair shot at a professional looking install on there own. Wish i had seen it years ago as i have passed up many of cloth jobs in fear lol. It's really not that bad at all. Just gotta take your time and think before you staple ;) thx again

Excellent speaker and demonstrator.

Great video!! Wish you could install mine here in RI. Very professional work well done!! Thanks for posting this video!

This is one of the videos I most like about refelting pool tables. I've added a link to it on my site.

Very informative. Thank you! Also it was nice to hear Ron White narrate :P

awesome video. most people don't know how hard it is to do the corner pocket. you REALLY have to stretch that cloth.

MUITO BOM O VIDEO

great video! just got a pool table yesterday and needed to figure this out. also subbed to your channel, thanks! :)

Great pool table video. I use polymat 777 glue I like it more than the 3m.

You are AN artist 🎨 good work

@Odhinn222 The spot is used to protect the cloth under the One ball and should be changed before it wears out. The wear and tear is from the impact of breaking and people that 'tap' the one ball to get a tight reack. If you didn't have a spot, a whole would wear through in no time. If you notice all the white/wear spots from behind the head string, these are actuall bald spots from the cue ball taking off from a stand still plus some downward force on the cue ball from the break.

just bought a 3 piece slate table, thanks for these videos! but honestly i would get this done professionally.

Several methods yes But i like your rail process Will do mine like that Just got my table true today

Stretching the cloth to the playing surface removes any wrinkles from the packaging. Essentially when he showed the foot and head of the table stapling is how you do the rest of the surface felt. As for the remaining flaps at the side pockets for the rails you trim to fit neatly so there isn't any flaps pushing out the pocket gully or sticking out where it is visible. Some people will also use the spray glue super 77 to adhere the felt for the stretching part of putting the felt down on the edge

These videos are very informative. I am using these videos to supplement my training that I will start in about a week. I am hoping these videos will be of great assistance in preparation for professional training.

Simple and awesome old school teacher!

Awesome man, me and my dad are doing one right now, and out of nowhere we stop and look at each other like, wait... are we doing this right? we just jumped in without knowing anything and somehow got it right, and thanks to your vids lol i know that we did it right xD

nice video otlvise can also be used to keep the seams even when installing the table

@Odhinn222 its called a sharpie. they come in different colors and you can put a dot on your cloth of whatever color you want. i have a dark blue dot on my euro blue cloth.

I agree, I'm a table mechanic and even with the fabric based ones made by master (the newer peel off ones are a dream compared to the lick & stick) I've actually thought about having a stamp made. Maybe I should.

Thanks!

thank you

Great Video. All that's missing is the cheezy 90's vhs instructional music

What happens between 3:20 and 3:22? I presume no adhesive on the table top then, but did not see the rest of the table felt installation on the video.

I sure would like to see in detail how you finish the corner and side pockets to me that is the hardest part of the install.

How do you get the old glue off the slate edges under rails sand paper?

I don't know what the previous guy meant about the horrendous accent. I'm from Tennessee and it sounds ok to me. I need a beer.

I was trained very similar to the way you work....recently though I covered a 9ft gandy big g....with simonis.....boy you talk about stretching.....with regards to the rails I had to learn a different stretch technique....stretch then stable at Least 1/2 above or below point of stretch

The video skipped to the rails before it was even half way ...What you guys talking about ...???...

is that blue pixel a table?

Where did u get the cloth from

I'm from Texas. Dude sounds normal to me.

what brand of 8foot slate coin table has a panther at every pocket and has been used in bars and pool halls

CLOWTH

can you please help me with the slate corner and center hole sizes and also the slate cutting dimensions please.

How often should you get your pool table refelted? We play maybe 3 times a week, would say moderate use.

wish there was more on the pockets

The thumbnail gave the impression you used the glue instead of staples... I like staples, works well with my table, but I’m interested in the glue.. Can you explain the benefits or drawbacks of both?..

I guess it doesn’t matter which side goes up or maybe it does and if it does how can you tell which side goes up if it’s not marked on the cloth pretty simple question probably the only question that anybody would ask in putting a pool cable cloth down.

are you using simonis 860 cloth?

where can I buy a cloth for a pool table

How much is the replacement cost?

@homebilliards This video seems cut in half at the 3:22 mark of it. It changes there to putting cloth on the rails from installing the bed cloth. I would like to see a the rest of the bed cloth installation including demonstration of cutting and stapling the bed cloth into the pockets. Overall this is the best series on the internet but this one is funky cuz it isn't complete. And it excludes exactly what I want to see bummer!!

Some here .will you make another video and show how you Install pool table Cloth. The step you cut out is what most people want to know how to do. Will you show step by step of how you cut the pockets also Thanks.

my cloth is wrinkled after being folded for some time. How do you recommend getting wrinkles out? Iron? Just hang for a while? What?

What size of staples i need

Probably the thickest American accent I've ever heard

buddy hall?

Why was the vid cut off in the middle covering the table?

2019? anyone

I have one pocket on my pool table, that for some reason, just won't except balls that touch the rail first. It's a corner pocket, the same shot on any other table or even the other three pockets on my table will except the exact same shot. I've measured the pocket and looked at it under a microscope and I just can't figure out why it acts like this. It's really irritating and I was wondering if anyone else out there has ever run in to a similar situation. Is there any way to fix this problem? The pockets are fairly tight, but they aren't triple shimmed or anything. A ball shot at this pocket will jaw where the same shot at the other three pockets will go in. You can't cheat this pocket. What in the name of holy hell is going on?

i need a stapler that shoots into slate...LOLZ

when you stretch the cloth the wrinkles will be gone.

Best video for how to cover the slate but... where is the rest of it! I was so annoyed when you cut it at the centre pocket! Arrrgggghhhh!

Who kept watching the whole video just to listen to the accent lol

this was to hard to do for 25+ people

A southern accent just means you know what your talking about

your video is "ok", but abruptly stops around 3:20 and switches to covering the rails befor you've finished covering the table surface. Recheck your editing.

good work but too slow

if anyone is working on a table and needs a little help please feel free to contact us, and we'll do our best to help ya ou www.ricksbilliardtables.com

I prefer to build with Woodglut plans.

Why didn’t you show how to remove the old. Not helpful!!

nice accent AHHAHAHAHA

Well...That wasn't worth a damn as an install video ....

Don't do that with the cloth... You're just asking for stuff to stick to your cloth. And if you know what your doing pocket liners are not necessary.

Great job! but not gonna lie, that is an ugly cloth.

Couldn't even watch with how low quality the res is and that horrendous accent