How to Install Post Base Brackets Into Concrete || Dr Decks

Рет қаралды 260,350

Күн бұрын

Today we’re showing you why we use post-base brackets and how to install them into concrete. In this video, we’re using the Simpson Strong-Tie ABA Adjustable Post Base which is designed to connect wooden posts to existing concrete. It’s basically a stand-off base that’ll give us a positive connection to concrete. This allows us to build up places to install structural screws.
-----------------------------------------------------------------
Dr Decks Merch: dr-decks.myshopify.com/
-----------------------------------------------------------------
Connect with us:
/ drdecks
www.drdecks.com
www.therebelcarpenter.com
#drdecks #howto #postbrackets #postinstallation #postbaseinstallation #installingpstbracket #postbase #aba44z #postbaseconnector #adjustablepostbase

Пікірлер: 96

@marval550 Жыл бұрын

Best information- hands down! Simple terms and to the point! You just helped this gal out! 😁

@victoriajo2012 Жыл бұрын

Dr Decks is the best!! Thank you for this fantastic video and for all you do for your subscribers :) !!

@sammypagano1576 Жыл бұрын

This is great information, informative & straight forward. thank you!

@rhythmdroid 6 ай бұрын

Thanks so much, man. Perfectly presented. Just what we needed.

@bobbienovak5573 9 ай бұрын

Ok subscribed! I'm just telling you your commentary was hilarious and yet you kept a straight face. I'm about to build a non attached porch covering on my front and want to also add a desck out back. This video was excellent

@eewtoobguy 2 ай бұрын

EXACTLY what I need for setting my beams. Thanks!

@keptaylor4904 2 ай бұрын

Excellent video!! Super helpful. Just what I needed! Thank you!

@stevenorsini2276 5 ай бұрын

Excellent demonstration and explanation, thanks.

@whetman2448 5 ай бұрын

Great video. Clear and concise.

@bmfitzgerald3 Жыл бұрын

Big time video sir, thank you! Subscribed

@tonyabrego494 11 ай бұрын

excellent demonstration needed this

@abel1955 Жыл бұрын

ive never done any construction stuff but want to build a pergola for my patio, this helps a lot

@bobbienovak5573 9 ай бұрын

I've built multiple pergolas but dropped concrete anchoring ground. I'm about to build a front porch enclosure to block out the brutal beating of Southern exposure here in Phx. I have 2 spots where concrete is already and am going to have to pour concrete for the other post bases. I think it's almost less work to do this than sink posts. And it creates no contact, which I like

@juliaweigen786 Жыл бұрын

thank you so much! it was very helpful

@howardc2452 2 жыл бұрын

Great show!

@erikele7138 2 жыл бұрын

Nice work Doc

@TSC9129 Жыл бұрын

Can you recommend the proper preparation for painting these bases prior to installing them? Great video, Thanks

@risingministries 5 ай бұрын

Appreciate you sharing good man!

@mitchelldouglas5365 Жыл бұрын

Just the info I needed 👍

@ArsenalOperator 2 жыл бұрын

If you have to lay a 4x or 6x directly on the Simpson bracket; are you able to butt or split two beams on that single Simpson bracket or do you need to install two?

@MsKikimalone 25 күн бұрын

Thank you for this!

@therealunclassified 10 ай бұрын

Great video. Right when I seen these are movable and raised off the concrete I was sold. I want build a pavilion or lean towith a tin roof for my BBQ equipment and these brackets are what I need.

@johnlasseigne7676 3 ай бұрын

How he kept it together, 😅 a true pro!

@clautamiralves712 Жыл бұрын

Thanks for the tips

@lakelivingb8409 Жыл бұрын

Need these wedge anchors for dock plate to ganyway...learned something. Thanks.

@EternalSunRa 11 ай бұрын

Thank you!

@kenb6144 2 жыл бұрын

Word of caution on using impacts. I've seen less experienced guys wail on those wedge anchors for several seconds, causing the concrete to crack. Especially on recently poured concrete. Great short video; you covered the topic well.

@ericsajna9218 2 жыл бұрын

Yep… pull they’ll pull the anchor right on out…. Less experienced should stick to a socket,,,

@yourmasterrenovator86 6 ай бұрын

Thanks heaps! Just wondering if the bracket is stront enough to not get squashed by the load on top of it, as in how much weight it can bear? Thanks again

@gazoomartian Жыл бұрын

great. thanks

@seldoncrisis42 Жыл бұрын

Would this type of anchor bolt work for a single-car carport? I'm mostly concert with uplift loads. Thanks!

@foggymtnbreakdown Жыл бұрын

I believe that the the Simpson standoff says to use a 1/2 anchor, not necessarily a 1/2 inch wedge anchor. One-half inch J bolts, 1/2" wedge anchors, and 1/2" threaded rod with the right adhesive are all OK, correct?

@ferromero2247 Жыл бұрын

Thank you boss

@SirFency 9 ай бұрын

Thank you.

@michaelmarkle6080 2 жыл бұрын

Do you like to use structural screws for joist hangers?

@mxdaddy1 22 күн бұрын

can I use these to install a full on fence. there is a concrete slab running along the fence line where the existing fence was in the concrete. can I use these and will it be sturdy to hold up a whole fence?

@alhansel3953 3 ай бұрын

I'm going to be pouring piers for posts for a patio. Am I better off using set in place anchors or are these sufficient?

@emperor002002 Жыл бұрын

So I'm installing on a second floor patio. How do I waterproof it? I'm using the same hardware.

@momo37219 Жыл бұрын

Should I use shorter anchor if the concrete footing is too shallow like 3 1/2 inch? Otherwise, I will penetrate the concreate slab and make it contact soil

@dragoonwarrioriv6257 Жыл бұрын

What do the corners look like? How did you do the corners to put the edges of the deck together?

@elvenchristman8100 Жыл бұрын

Thanks

@chappledesign 8 ай бұрын

is it possible to use a wedge anchor on a Simpson post-base-bracket for an 8' awning post? I have to drill into existing old concrete due to location issue.

@bobbyfrisbee3627 2 ай бұрын

If you have a rotted post and cut it dig out the old post in the ground, can you attach a bracket to the post and pour your footer around the bracket attached to the supported post?

@synthead 10 ай бұрын

What torque should I aim for with a socket wrench?

@VillaLumina 4 ай бұрын

Thanks. I required this. Just strapped my tv onto the post using ZeboZAP gazebo tv mount. Feel secure that my tv is not flying anymore

@erwinbrubacker7488 Жыл бұрын

At last, at last; someone that goes professional ! Lots of dudez stick posy in hole & pour concrete around post.

@2searingfilms Ай бұрын

What did you use for the shim? Or did you use a manufactured beam? How did you get the beam to fit to the bracket when the true measurement of each beam is 1.5” wide making two 2x equal to 3”. I can’t find such brackets that perfectly fit my two 2x12 that attaches to concrete because all brackets equal 4” wide and not 3”. Seems like these brackets were made for 4 x 4, 4 x 6 or 6 x 6 post footings and for engineered beams, not 2x. Thanks for any feedback

@user-pv2ef7zt9r 3 ай бұрын

I want to use these brackets for a shed, but drilling into rock. What kind of screw/bolt would I sink into the stone?

@benharwood3698 3 ай бұрын

Is there any reason I couldn't do this on a large concrete patio pad? The deck wouldn't be tied to the house so it would be free to move with the pad without damaging the house (i.e. frost heave).

@lynale990 3 ай бұрын

I use the ones that have legs. How thick or deep in the ground should the concrete base be ?

@gregorymosher5008 3 ай бұрын

Anyone know what pencil and retractable pencil lanyard he is using? I use a cheap pencil pull but only fits carpenter pencils and its kind of weak.

@coreyk2998 Ай бұрын

Great video, love your content been watching them all. How do you properly line up 3-4 piers with those brackets if your doing footers right next to house for a ground level deck? I dont have enough vertical space for a post. How much do you recommend those round pier blocks you've talked about in other videos? Is that the "easy" way or do you think theyll hold up for 20-30 years? THanks again brother you are a great teacher.

@iwemeada Жыл бұрын

when should the ABU44Z to be used instead of this ABA44Z?

@bigtime37ja 2 жыл бұрын

I use those post stand offs all the time, when redoing front porch posts here in the south. Moisture destroys the posts quickly. Thanks for the video as always, very informative.

@apilkey Жыл бұрын

@bigtime37ja can you use these clips for fence posts? I was going to pour concrete 42” Deep and 12” in Diameter using Bigfoot Systems® Footing Form BF28 that has a 28” Diameter Bell end. Once the Concrete sets I was thinking of mounting these brackets to accept my fence posts. Or are these only good for decks?

@whales302 22 күн бұрын

So if you did have to level a beam in a post bracket how would you do it?

@masucci61 Жыл бұрын

I’m building a deck on a slope and I was wondering if it would be preferable to set the post inside the concrete as opposed to using a Simpson tie Thanks

@erwinbrubacker7488 Жыл бұрын

Do as this fellow instructed, I did construction for 15 + yrs. I was always bewildered why contractors plant the posts into the concrete. Good question.

@PedroPerez-cp3on 7 ай бұрын

is safe for me to use those on my 4” inch concrete?

@danvu9812 8 ай бұрын

Wouldn’t a corrosion resistant bracket be better on concrete so it won’t rust from the rain and snow?

@matthewstevenson7666 Жыл бұрын

Just used my first ABU44Z. All fasteners are tight, 4X4 secure in it, but lots of swaying back and forth when pushed. Is this normal or is it supposed to be taut and immoblie?

@joshroberts8881 11 ай бұрын

I’m in the process and have the same worry. Did you figure this out or was it more stable as more work was added?

@HotspotToolkit-sd7vs 10 ай бұрын

It’s really just sheet metal so there will be some flex which in many cases is preferable to avoid things snapping. However once the weight of the deck is on it it’ll be minimal.

@hyfyre4704 Жыл бұрын

Was that drill going counterclockwise? What kind of bit did you use for the concrete?

@andyprairiedog4829 Жыл бұрын

Video effects on the camera/frame speed makes it look like rotating objects are going the opposite direction...impact wrenches, helicopter rotors (still or seems slower) etc. The bit he is using is a 1/2" rotary hammer drill bit for concrete. I started out with a 20volt hammer drill but those rotary hammers and their concrete bits are on another level.

@chrishall5439 2 жыл бұрын

Would be nice if the galvanized wedge anchors were more readily available.

@nuggets.6774 6 ай бұрын

In Australia, if you were doing that outside and worried about dust extraction, you'd be the butt of everyone's jokes. But maybe we're just careless and heading to an early grave?

@leestebbins5051 4 ай бұрын

How do you evacuate the dust before setting the anchor? Straw?

@AustinAkin 26 күн бұрын

The dust extraction isn’t necessarily for safety reasons, you have to get all dust and debris out of the hole or it won’t work properly as he stated in the video especially if your using epoxy in the hole before putting in the anchor

@nuggets.6774 26 күн бұрын

@@AustinAkin I agree. It's important to clean out your hole. He did, however, talk about HEPA filters earlier, which suggests the 'hot topic' relates to the possible health implications from ingesting dust. It's just getting to the stage where it's almost impossible to do simple jobs these days. Australia's a nanny state. Our most recognisable sport, Aussie Rules, is being ruined by overly officious wankers trying to make it as safe as possible. It's supposed to be a contact sport! Rant over!

@adammorgan9304 26 күн бұрын

@@nuggets.6774”wanker” lol. I hear ya about people freaking out about safety. Some of these things are no brainers but some are a bit extreme.

@Paintballsfreak Жыл бұрын

Dumb question, but can you use 3/8” wedge anchors?

@erwinbrubacker7488 Жыл бұрын

5/8 is even better.

@Discovery123. Жыл бұрын

If the foundation is not level, how do you shim that beam bracket? Thanks

@erwinbrubacker7488 Жыл бұрын

Most of time there is a post between anchor boot & beam. If not up to 1 " should be fudgeable, w pt ( pressure treated). I would lay it flat.

@joehiatt1992 Жыл бұрын

Are they rust resistant if not the weight will collapse them if they do rust

@patty109109 Жыл бұрын

They are galvanized. Will take many, many years to rust out.

@whitebread940 11 ай бұрын

I just want to know what drill you used . This is hardest part so far .

@TheChupacabra Жыл бұрын

Bring your sawzall to the site as well, be prepared to have at least one anchor not go down far enough and have to cut the top of the bolt off to get the post to sit flat.

@andyprairiedog4829 Жыл бұрын

Very true to bring tools to help fix some unexpected issues. My circular saw battery died but thankfully I had already done all the major cuttings and needed smaller cuts to make. Jigsaw and recip saw to the rescue 😁

@tanhtran8192 Жыл бұрын

👍

@idahomike100 2 жыл бұрын

What do you do if your post is bigger than that bracket. My posts are 8". If you tighten the bolt before you install the post you cant use the slot to level the post.

@KenDebono Жыл бұрын

Buy a standoff having the right dimensions. They sell standoffs for 4x4, 6x6, and 8x8. Install all the standoffs, then with a chalk line or string, ensure they are in a straight line. As he stated, loosed nuts to move any standoff out of alignment of the other ones. The slot is not meant for allowing you to plumb the post - to do that use shim(s).

@angetodac Жыл бұрын

can I place the anchor in wet concrete one hour after I pour it?

@Charles0511 Жыл бұрын

No.

@drumswest5035 Ай бұрын

Make sure you have a washer under the nut, didnt see one

@awf118 2 жыл бұрын

“If you don’t clean out your hole before you insert your bolt…” truer words never spoken Dr.

@johnvalencia7488 2 ай бұрын

Try using a brass punch.

@EverythingSpicy 10 ай бұрын

All I heard was "Clean out your hole really good before putting your wedge anchor in." Dirty mind I know.

@strokerace4765 Жыл бұрын

No way a bracket provides the same lateral strength that burying the post in three feet of cement does!

@driveman6490 Жыл бұрын

And when your post rots, you'll wish you had used a stand off bracket.

@MissChiVUs1 Жыл бұрын

I have to tell you that when I glanced at the cover image of this video... it looked like a bleeding hand. Sorry, I just thought it was funny. Great video, though!