Awesome! We are sure you will love them!

Just awesome! Thank you and we are very happy to see you happy with the product. These have surprisingly been one of our best sellers and people seem to love them. Thanks for the message!

I agree. This would be a hot sell if you could make a bark busters attachment. So you don’t have to drill through the metal bars. ;) ;)

Here is a template link! Just make sure to set your printer scaling to 'none' and double check the measurements once the document has printed out. www.dropbox.com/s/b91rm8h0lkjpn1j/QF-MM%20Placement%20KTM%20%28Set%20page%20scaling%20to%20%27none%27%21%29.pdf?dl=0

Multiply by 25.4 and you'll have millimeters.

Many have done this yes. It just takes a little imagination and careful planning so that the levers don't contact the mirror mounts but often that can be quite easy with moving the levers in slightly or dropping them down just a bit. In short, we've never seen a custom mount situation that we couldn't design a solution for.

Yes, all of the kits come with small black plugs for the threads that look quite nice.

That's what those black plugs are for? Thank you. Could also repurpose as camera or phone mount.

As long as you are faster then the Polizei, yes…

Stewie Mac, what do you mean by 'filtering'? If you are referring to what we call 'splitting lanes' here in Cali, then these actually work really well as they are totally adjustable both in and out and can be set narrower than the outside of the bars very quickly. They are also better than stock for splitting lanes because they don't stick out where they could collide with other mirrors. Not sure if you watched the video the whole way, but it will show them tucked inside and quite low pro. If 'filtering' means something else completely, then we have some learning to do!