I think you mean this is the Scythe Screwdriver Rev. C and it also includes a cooler for some reason.

Need to do a comparison of the differences in the screw drivers between rev b. And rev c.

This was perfect to watch for installing this cooler on a LGA1700 i7-12700KF. Thanks for video! This cooler is great no more throttling during gaming. Max core temps running in the 60-65c range.

Love this channel. Just last night I was looking for info about the Rev C variant of this cooler, perfect timing.

Awesome informative guide once again fans. Keep up the hard work

Thanks Nick for this tutorial.

It's interesting how different regions have more retail access for certain parts. In the US, these Scythe products are mainly available from resellers and tend to be marked up quite a bit more than they are sold for in other regions.

I have the Scythe Fuma 2 paired with my 11600K, and I love it. My temperature never seems to go over 65C on normal load. It's also impossible to hear it even with my ear right next to my system.

I have one of these running on a 2007 core2quad extreme qx9650 running at 3.6gz. It works pretty well. So yeah it fits old builds.

Screw in with confidence... -"the verge"

10:37 The rubber part of the standoffs should be in contact with the motherboard. The box details this instruction. But, thanks for the video.

You can't go wrong with Scythe. I have a Mugen 5 PCGH Edition Push/Pull. It's silent and effective.

This was super helpful, showing the paste spread was a great idea.

awesome video 😎👍

Ok, "too little thermal paste is bad, a lot is good" or whatever nonsense he's saying, is incorrect. You CAN put too much on. If there's too much in there it prevents proper heat wicking by the heat sink. The amount he's using isn't terribly awful, but it's still more than you need. I would only use about 1/3 of what he has on there. You want just enough to form a kind of thin glaze, and we always apply ours with our finger tips (if you're not allergic to the compound or have some other such sensitivity) and use a spot about the size of 1-2 grains of rice and spread it manually to cover the surface. Editing to add: this is otherwise a great video, don't get me wrong. And from what I've seen of many of his other videos, they're by and large extremely helpful, and of course well done. I just have this stupid pet peeve about how much thermal paste should be used. I was an electronics technician in the US Navy, and have been building/repairing computers now for 30+ years, so I have experience in this area.

Love my Rev B, air ftw

I wonder if scythe coolers will be available in Australia at some point? I've looked for them over the past few years but they're on available as expensive imports.

thanks for the vid, !

love these "Stock BackPlate" coolers! Debating on getting Arctic Freezer 34 duo vs this one. which one should I get?

I just bought an Scythe mugen 5 black edition... Do you know if this new brackets for AM5 is compatible with other mugens releases?

Great video, thanks. It helped me a lot.

between the stock Kaze fan on the mugen vs using the wondersnail, what would you prefer?

Great video. Subscribed.

Great video fams. Need one of those screwdrivers for my tool kit I reckon.

Can't seem to source them here in NZ :(

tis works on a b 650 whit blackplate stuck?

Would this cooler be enough for the 12700kf?

i have an msi mobo and tha backplate doesnt fit

Will this fit z690i rog strix?

your backplate screws come off mine are attached to my backplate

yeah, installing cooler and a backplate compatible with new socket is kinda exiting, i quess, but, does this rubber based pings or whatever things is ok for am5 as a question on height. Also i need more thermopaste on 1700 obviously..

Hey do you think the lga 1700 bend corrector will help with the contacts? I bought this and saw a video regaring the cpu bending for lga 1700.

"A little is to much is fine " except when you have conductive thermal paste like artic silver

Is that micro atx motherboard u using im about to get this one im using b450m can i install this fan?

AM5 & AM4 has the same installation method? I have a schythe mugen 5 non Rev version that only supports up to AM4. So I guess I will have no problem installing it on the AM5 platform too?

I have rev b. I just bought a 7950x3d. Is there an adapter kit, or are the fittings already in the container I just need to try them out? Otherwise I'm just going to use cable ties which seemed to work pretty well for me

Is there any way to know if those kind of coolers fits on out case's? From this perspective it seems a huge metal dinossaur foot

well presented.

Does it perform any better/worse than the Rev.b?

Excuse me sir, could you tell me what mother board are you using?

Average Intel noob: We have a new socket every two years and the mounting of coolers is different too REEEE, buy more stuff! Average AMD chad: Sure bro, here's our new socket after many generation on the previous one, and don't worry, you can use your cooler forever.

Bad video💀💔